Nice scores. Are they going into the collection? Im not sure im going to test them tonight and see how it sounds, im going to keep them but i dont think they are going in my collection in the long run i just could not let them go i did get them cheap. Im going to check everything and make sure they...

Well i just got them delivered the 97.2dsp was NIB but the 97.1 did not have the box but its clean so i dont care, what are the din port on the 97.1 for and what are the computer port on the 97.2 for?.

Well i have orderd all the fets,small transistors, smd resistors/capacitors and new caps for input and rail, its expensive so i hope i can get it to work.

Bertje wrote:Just clean the board with IPA and carefully test it without a load.

Tha board is out of the chasis and the fets are removed, when i powered it up the protection light comes on because
water came inside the amplifier the water was spilled a year ago.

If one of the power supply fets failed...replace them all as well as their gate resistors and predrivers. It's also not a bad idea to replace the PWM IC while your at it. Thanks for your help, i have measured the gate resistors and they are all have the right value but im ordering different kits wi...

A/D/S/ has always been a bit ahead of time with the engineering of their amplifiers. They did have a plug and play x-over system on the early series, also included jumpers to be selected on their pcb's for configuration of different system designs. The later series such as the PH did evolve to have ...

Hi i live in Norway, a few years ago a car stereo company here sold alot of ADS amplifiers i think the had 8 models and they sold them cheap under 100$ a piece. I remeber i tried finding info about them back then but on the car stereo forums everybody said they were cheap and crappy amplifiers, are ...

Were any of the power supply fets bad? You probably removed them without needing to. There was four bad power supply fets but i was not sure if i had to remove them to check them since they are connected to each other, i removed them all after i marked where they where mounted. The ones with colour...

Hi guys, i have removed all the mosfet transistors several of them where broken but i read somewhere that small smd resistors also can blow when the transistors blow. Since im clueless i need your help to be honest i dont know what those small smd are i see some are resistors and some are transistor...

the concept 97.1 is a hcca150 2 of the channels: 50x2 watts RMS at 4 ohm 100x2 watts RMS at 2 ohm 200x1 watts RMS at 4 ohm bridged The other 2 channels: 25x2 watts RMS at 4 ohm 50x2 watts RMS at 2 ohm 100x2 watts RMS at 1 ohm 200x2 watts RMS at .5 ohm 100x1 watts RMS at 4 ohm bridged 200x1 watts RM...

I wrote wrong in the post its the 92.2 dsp and 97.1 the 97.1 does anyone know what the 97.1 put out i know it got 4 channels, i think i will try and get a 97.3 concept so i got the complete series for a future project.

The power and ground are oem closed terminals, i also had to change the sensetivity pots they were bad and made alot of noize.
I will send you a pm i forgot yesterday i was so tired

I do have one. I have a parts amp that still has all of it's terminals (not the power but the rest are there). I will send you a pm later, i got inspired by your tread and i just finished upgrading my 0.3 its only misissing that remote terminal and its perfect. Im using white side covers from my 0....

Hi see you are keeping busy, i wonder if you got an remote terminal i need one because the threads are broken in mine.
I have fixed it but it looks like crap, i think the speaker terminals are the same please tell me if you got one

Hi im talking to a guy who has these two Orion amplifiers i can get both for a litle less then 300$, do anyone know what they are worth?.
I want to keep them an use them later down the line they are brand new but i dont want to lose money if i should decide to sell them.

I would also keep investigating this before you throw a new alternator at it, but a couple things to consider. Assuming you read 14.3 with the car idling and little to no load on the charging system, its still possible the alternator, or part of it, is faulty. Since you're chasing a noise issue, yo...

Well today i picked up the HK CA5250 does anyone know what is most likley to blow when an amplifier gets water inside?
The protect light is on but i cant see anything wrong with it so im going to test it with my brand new auto DMM, just wanted to here if anyone knew where i should start checking.

I like them. Just a 5 star but there is some movement in there. I like them alot im just finished taking the tires on the rims and balancing them but i got to lower my suspension so it looks good i got the rims and tires through my workpllace so they were cheap, today i bought new speakers so i can...

Alternator change is the last option it charges 14,35volt so its should be good, im thinking of making new ground spot in the trunk i was thinking of welding a bolt in the floor right where the amplifiers go that way they will be short and i can get a good clean ground.

That child will just have to seat in a cold seat....lol.. Yup i lie to him and say its on, i go crazy of that blody beeping i hope i can make it go away with changing the HU and putting in new wires if not i will have no other choise the replacing the alternator who i suspect is the causing the sou...

not sure if its your deck or not but there was a fairly long run of pioneer decks that if you played them using the rca's and then disconnected and shorted out the center pin of the rca you would blow a pico fuse, even with the deck off. After that your deck will have more noise. you can test too s...

I bought 4 of these 17" today with 225/40/17" tires, i needed new summer tires my old ones were 15" with 10year old tires.

trickyricky wrote:perhaps the pico fuse or resistor on the rca's shields inside the HU is open/blown.

I tried grounding rca and chassis on the HU but it made no difference its a brand new HU but it could be something wrong with it but instead of finding out im changing it to the alpine because its a much better HU

it should help as long as your not picking up the noise before the transmitter. I have done the big three and grounded the pioneer chasis but i got to change that HU its so sensetive im going to try with my alpine HU and see if that makes a difference if not i will make new wire to the HU. Is there...

http://download.phoenixphorum.com/Manuals/Processors/TBA/TBA1_Instructions.pdf the DR or delay remote will make you're amps turn on with a delay of 3 seconds.............. the switch you're talking about give you the ability to have a grounded or floated signal...... it depends from car to car and ...