I was thinking about having a "door" in the front of the box so i can open it, the DQX should come with the remote so i can adjust alot on that.

Was thinking on something like this, the zx600 are big amplifiers as the widht is 16" with brackets and the box is 35" max i will have to put the TBA mounted in the top board of the box. I have tried to use paint so i could explain how but my skills are limited, i dont know if putting the ...

Id do an intake port and exhaust port, the fans will only circulate the hot air the amps put off causeing them to run less effiecient. Remember, class a/b are 50% effecient, so they loose 50% of their power due to heat. The cooler u keep them the more effecient they are. Plus u lower the risk of fr...

ttocs wrote:In a box? I hope there is some air to go over it other then just what the port moves?

Im using 4X 70mm fans on it 2 fans blowng cold air in and two fans out, its going to be closed so there is no port just plexi windows.

Hi i saw this and i got a question, the RJ45 telephone cabel from the R-link to the display is that just a regular RJ same pin layout or are some changed?

Im making a box to have two zx600ti in but i think i need some help, i have got the box and some of the floor in i think i used to thick wood under the floor so im getting something else tommorow. My main problem is if im going to put the amplifier in a box on the floor or if im going to put a box o...

ttocs wrote:I have the led kit pm me and we can work something out.

Check innbox

Hi, i see that the SDT-TI kit had R-link box ant the Display with led but i also see a wire with two led bulp that goes to the second output port in the R link. Does anyone have one of this or know how i can make one i got RJ45 plug with wire so its what the different pin are for that i would need, ...

Hi, im starting to get the box in place now, i found out that i got 6X9" speaker hole in the rear parcel shelf and im thinking about putting bass reflex pipes so i get the sound in through the cabin. Im not putting the amplifiers under the floor im going to build a box that im putting on the fl...

ttocs wrote:the ti-sdt kit came with the rlink and the sdt. There was no kit made with the rlink and the rmd if they are together the someone put them together.

It is a TISDT kit, its in TI colout but the display is missing the PG logo and the writing that explain what the different led colours are.

That sucks but ill try to do something with it, i tried to find picture of the sdt kit but that was hard.
Does the sdt kit comes with a box like the r-link?.

its not too hard to get a 3 color led although if I remember correctly it was a little strange as it was a common anode led if I remember correctly. there is a ground pulse from the amp/rlink that turns it on If anyone is looking for r-link sdt kits pm me I have a couple I can let go for a fair pri...

Hi, i been biding on an TI-SDT but its getting expensive thought i would ask if they are hard to finf and what they are Worth?. If i got this right it shows the voltage the amp is getting and it got the low voltage light on the box, what else is it for and can i buy a RMD display and hook it directl...

Got the enclosure ready, i used the router template i made and it worked great.
The Only thing left is speaker terminal im getting it over the weekend.

An engraver SHOULD be able to get the small lettering done. Bring it to them before you have it painted so they can scan it and set up a vector file. Make sure it's perfect before you get the paint work done, then bring it back and they should be able to engrave it back. I think the originals were ...

sound damping, and sound damp-en-ing are two different things. Sound damping will reduce noise but dampENing it do nothing but get it wet. Okay i will stop dampening those mats then lol, i bought alu butyl mats and Neoprene mats thought i would use alu in bottom and neoprene on top of the alu. My e...

not sure exactly what you mean there. Easiest way to make a false floor is to make a template out of cardboard and then transfer it to wood to cut it out. I was thinking on using the carpet in the trunk as template but its a bit warped so i may have to make a template of cardboard. I will start on ...

That would make sense thanks for the help :) When i make the false floor i have to cut it in atleast two pieces to get it in the trunk, but when i use the old trunk mat to line up the mdf board how do i calculate in what the jig saw cuts out of the board does this matter i want it to fit perfect in ...

I bought some new tools and mdf boards or i got the mdf boards for free at my local wood shop i got 4 small plates, the jig saw have lazer light so i dont screw it up. I also got a new bit for my router they did not have carbide bits so i bought a bosch hard metal, what kind of blade do i use on the...

I got the box today the subwoofer should be here by monday, i started on the box i put the bottom on and put mats in it.
Does it help to use dampening mats on the outside of the box and what is best alu/butyl or polyphrene?

The engraving is done in a shopbot.....a pretty expensive tool but it does wonders most metal machine shops should have one. [youtube]https://www.youtube.com/watch?v=Fn_krWd-Gng[/youtube] I cant find that here but i found a guy that only do lazer engraving not far from me i have asked him for a pri...

Hi guys, im waiting on some amps that have rust vains and i want to get them in nice condition. I have a paint shop who will paint them the color i want but then i would need to get stickers made for the top logo and switches. Does anyone here have any experience with removing rust vains and getting...

I was looking for carbid bits but they did not have any this router can take the thicker bits to so i will look in the hardware store if the got a good ones with the thick shaft. Do you think i can use the template?, if i saw out the middle with a saw i can not use the template and im scared to fuck...

Here is the template im making for my router do you guys think this will work?, i did not want to spend 150$ on a template when i payed 65$ on the router. I got some hard steel router bits but they does not got plunger bits here can i drill a hole and use the straight bit i got when i make the hole ...

I was thinking something like this with cut out where the opening between the rear seat is, i would need to get the plexi pre cut but i can ask in my old workplace they have big saw that cuts it perfect its only 3 windows in the front and the sides.