the X600.1 is the most under-rated of the Xenon line many will actually give you in the 800W range.

The RSd is a solid bet as well and may be easier to locate.

Bfowler wrote:dammit, i like how i say that in the 3rd post...no one ever listens to Brian!

I saw but wanted to expand it a little.

Welcome.

Well this was fun. One thing which was touched on regarding home wiring vs car that really was not fully addressed but has a large bearing on the matter. Why is it that home wiring uses 110VAC and the big power lines outside are 480VAC or better? If P = E*I and E/I = R, since Voltage and current are...

What's your battery voltage and how is power being routed and connected to the amp?

X1200.1's like their current ready and on tap. If your battery is weak or if you are only feeding a single 4AWG to one side of the amp you're asking for it to break.

audiophyle_247 wrote:Out of curiosity, what program was that amp concept drawn up in?

it is going to be "solid works" or "Autodesk inventor"

I have to say that is one of the best phoenix images I have ever seen.

So do the speaker terminal set screws and the remote terminal set screw take the same hex key?

I know that previous PG has had an issue with mixing SAE and metric sizing so that you needed 4 keys to install one amp with wiring kit.

MW3 wrote:

VW337 wrote:I still want to see amp wire terminations.

You mean pre-amp, speaker and power terminals?

Please.

I still want to see amp wire terminations.

I see the same gasket and surround, just a little bend where none was previously, this allows the surround to rear mount from what I can see. The rear mount and the crease at the edge helps reduce material created sound artifacts. In the end reducing some distortion causing elements. But the tweet, ...

As stated above drop the power to the rears use deck if you want to power them. Personally I have never gone to a concert and stood with my back to the stage, why do it in a car? Any sound coming from the rear should be a reflection from what is played in the front. If going PG you could get away wi...

Morgan,

This weeks images are due for a recall, you're just showing us current product. The First is an RSdC sub and the second actually looked like a Xenon tweeter, but is if was an RSd tweeter where did the felt damping go?

WTF, can nobody top drinking hair and a non-selfish wish?

Kinda like a snipe hunt round here.

B wish granted, however his missing hair has landed in your beerpong cup in a championship game, still sober you must drink or loose.

I wish for dutch bros coffee for all.

^^ Yeah what he said. Ground make sure you are connecting to a "Phono" input. Reseat the stylus.

FYI TLD22's make a nice compact preamp.

I want to see the wire terminations.

damn... GM is trying to force feed us a caddy dealership... I hope not! Bentley Bentley Bentley!!!! Honestly almost anything but American brands cars would be acceptable, but have you seen the new Bentley they're trying to squeeze out? It is almost cute by the benchmarks they have sent over, they'r...

^^ Shut is college boy. Shouldn't you be drunk by now?

First suggestion- Dismiss any thoughts of glory, build something you would wish to own. Make it 2 channels, from there you can add 2/4/6. Believe it or not if you build a great amp that you would personally go out of your way to buy, others most likely will too. Think along the lines of Cadillac vs ...

errins grand plans... name them after music composers ie Mozart series (abbreviated "MS" for short) ^^ thought I covered that already. I feel it's a touch classier than naming them after a hole or charred remains and you can retain the prior model number scheme that people already recogni...

MW3 wrote:Jimbo you are always a tough one to please.

Are you insinuating that pleasing him is possible?

Jim is always here for a good time and some ball busting, but he does speak with passion and honesty.