I had to have A4 but there was a problem... Thus, I also look for A4 not too expensively...

Thanks Fuzzy... I have at present Helix A2 Competition, MS250 and I wanted a MS2125 but I have some difficulty finding clean. Thus, I thought of buying to take an Audio JL 1000/1... Possibility: A2 on my MB Quart Q216 Signature and the JL Audio on the sub. The MS250 on rear fill. I thought of instal...

My car: Honda Civic sedan 2005

My car is covered with eDead V1 and eDead V4(by place).

My music: Very varied, rock, alternate, classic (little), instrumental, dance. No hip-hop, rap...

I look myself for a sub SQ. At the moment, the amplifier is going to be or an JL Audio 1000/1 or my Helix A2 Competition...

I thought in: 2 JL Audio 12W6, IDQ12 (IDMAX)...

You advise me what?

Damping factor at 4 ohms?

bdubs767 wrote:$800 for the 4 channel and $700 for the mono
Retail nto all that bad

Where did you see the retail price?

Pouaaaa!

No idea?

To use the other pair as center? Is it possible to use the inside of the center of the console to install the kit?

1 to steer towards the passenger other towards the driver?

chaplin wrote:Hihi I understand. I rather wanted to know if there were major problems and in comparison with PG, Zapco, etc.

Thus the most solid series is the M-MS-MPS? And the most musical?

And concerning the reliability in comparison with it the other brands (Brax, PPI, JL Audio, PG, RF)?

Hihi I understand. I rather wanted to know if there were major problems and in comparison with PG, Zapco, etc.

Thus the most solid series is the M-MS-MPS? And the most musical?

How is the reliability of Brax?

It is simply a question that I have 2 kits and that I looked for the best way of using them. Furthermore, they have simply 90w rms then I hope to increase one the power forward. I have the possibility of installing a MS1000 (2x250(340) on Q216 :shock: ). 2 Channels forward and 1 briged behind on the...

What is the best way of installing 2 kits of "MB Quart Q216" on 1 amplifier(2 channels)?

Installed in 4 ohms there is problem but in parallel in 2 ohms it is possible with X-Over of origin...

Is it a bad solution to install 2 kits of component in the front end?

Are there caps better than those of origin? Have you models to be proposed? For the comparison of my MS, we can also compare her in quality with the other amplifiers of Phoenix Gold... The important for me it is the quality of sound and not the power... My MS maybe to improve by adding Burr Brown or...

For the definition of the amplifier, I do not speak about power, but about quality of its ( SQ). If the sound is excellent and if she is comparable to the new amplifiers, then I am satisfied. I shall buy to myself then a MS2125 as well as a MS2250 to complete the installation unless somebody sells m...

I heard that I could replace cap by the other models... You advise me what?

You really believe that I should sell my MS250? If sheis not satisfactory for me then why she would be it for the others? She was not practically used... How much is sold this model at present?

Then, you propose what? Several new Audio JL is unless $300... There is a certain peace of mind because they are new... If I can obtenirs at good price, you agree that it is about an excellent choice? You say too expensively too expensively with regard to what?

According to you, what is the best series of Phoenix Gold? I have another MS250, should I consider it in my installation either look at amplifiers younger? I thought of trying an JL Audio because the evaluations seem very good and the price more interesting than Zapco and Brax... I have already used...

I have another MS250. Then you would recommend not to install Q216 in " rear fill " and to instal that a single pair forward either to install 2 pairs is an option? The idea to install one "to rear fill " was for the perfection, the passengers and also to improve the sound when I...

But because I have 2 X-Over with my component Q216(QSD216), if I connect them in series, then filters are also to be serie... Whether it is to connect on the channel of the front or rear, the XVR to "rear fill " connection is going to be mono and under 8 ohms... Look of spec of the XVR... ...

The Zapco question is a fair one I just don't know anyone here thats got a Zapco in their stash or setup. I have one in my parts pile and its a four channel < shame someone thought it was a bass amp, thats how I get a lot of four channel amps, people think they are bass amps... :lol: :lol: :lol: C ...

I would use simply 2 channels to feed the sub and the rear fill with the XVR and 2 chan on the front... Or briged 4 chan in 2 chan and feed XVR... Forget 4 channels, I would like to know how to connect "to rear fill " Q216 Signature" in 8 ohms and to know if filters are going to inter...

Thanks! I have already had amplifiers phoenix Gold in the years 1992-1995. I liked well, but I wondered if I again had to buy one M (MS, MPS) or Zapco, JL Audio, Brax(used) or Helix... Does the series MS seem to take of the age vs the amplifiers of new generation (Phoenix Gold or the others of new g...

Allo,
Is it you find that the sound is identical enter the series M and MS? The MS and MPS is more adapted for the competition and M for the "beginner"...

Furthermore, what you would choose between the MS1000 and the Zapco C2K-4.0X for an installation SQ? Why?

Thanks!