The reason I've not been posting much on here..
The reason I've not been posting much on here..
..because this has been taking all my spare time up
http://www.talkaudio.co.uk/ipb/index.ph ... k-project/
I still have a scan through and keep up to date but my mind is focused on this project and hope to have it on the road for summer time
http://www.talkaudio.co.uk/ipb/index.ph ... k-project/
I still have a scan through and keep up to date but my mind is focused on this project and hope to have it on the road for summer time
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
The reason I've not been posting much on here..
Love that project
As an incidental I work for an industrial coatings company by day Mark,
We do plastic media stripping (takes paint from a coke can without substrate damage) as well as the usual garnet, chilled iron and steel shot blasting (SA 2,2.5 and so on). If you need owt cleaning up
We spray wet paint also, thicker than automotive coatings (airless) but I know you have experience and an even more experienced buddy in the painting field already
Nice work so far, I hope there's a little system planned for in there too
Jon
As an incidental I work for an industrial coatings company by day Mark,
We do plastic media stripping (takes paint from a coke can without substrate damage) as well as the usual garnet, chilled iron and steel shot blasting (SA 2,2.5 and so on). If you need owt cleaning up
We spray wet paint also, thicker than automotive coatings (airless) but I know you have experience and an even more experienced buddy in the painting field already
Nice work so far, I hope there's a little system planned for in there too
Jon
Re: The reason I've not been posting much on here..
most definitely a small system planned!! haven't decided on kit list yet but it's looking like a Nak cd700 headunit and Zapco processing for starters!
Mark.
Mark.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Re: The reason I've not been posting much on here..
good stuff man thats alot of work!
what else can I say I am a grumpy asshole most of the time.
Re: The reason I've not been posting much on here..
Oh bringing out the big guns, nicemarko wrote:most definitely a small system planned!! haven't decided on kit list yet but it's looking like a Nak cd700 headunit and Zapco processing for starters!
Mark.
Nice clean sound then...
...maybe a Colossus and 4 x 15's in the back
Re: The reason I've not been posting much on here..
not decided on amps yet, thought maybe Soundstream class A's ran balanced from Zapco stuff, dunno.. I'll worry about that when I have an MOT on the car!!
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Re: The reason I've not been posting much on here..
man that make me want my 61 ghia and 68bettle back
very very nice work
very very nice work
most of my gear is gone :liar:
2020 honda accord sport
2020 honda accord sport
Re: The reason I've not been posting much on here..
I've been lucky enough to see this in the flesh. It's looking great and is going to be something special when finished
Re: The reason I've not been posting much on here..
It's not moving forward as fast as I'd like right now, I'm missing some special bolts that are hard to find I just polished the front panel with my £5 special polisher and have to say it looks nice just polished the wing on my A4 and noticed I got some water marks in the top (damn English weather ), I'm scared to polish too much as I don't want to screw it up..paintguy wrote:I've been lucky enough to see this in the flesh. It's looking great and is going to be something special when finished
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Re: The reason I've not been posting much on here..
Little milky patches?
Try wafting a heat gun over them. Doesn't always work, but worth a try
Try wafting a heat gun over them. Doesn't always work, but worth a try
Re: The reason I've not been posting much on here..
no, more like silicone marks but I know they are from water drips! might get some 1200 and lightly polish by hand, it had 3 coats of lacquer so should be OK.paintguy wrote:Little milky patches?
Try wafting a heat gun over them. Doesn't always work, but worth a try
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Re: The reason I've not been posting much on here..
thought you guys might want to see where I'm up to with this project, still missing a few parts that a proving very challenging to source but getting there!
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Re: The reason I've not been posting much on here..
looks good!!! i would of gone crazy dealing with the project..
The reason I've not been posting much on here..
Although I don't drive one, I am a huge air cooled VW fan. I have a 68 beetle, soon a 69 also. I recently finished wiring a 2.5 Subaru in a 64 beetle and that thing is so fast with a stock 2.5, it almost belongs in there. Having modern A/C and heat doesn't hurt either, hehehe...
This and the notch back (wagon looking one) are awesome, but I'd prefer the bus with all the windows and the V front (60's) I believe...
Hello from my IPad!
This and the notch back (wagon looking one) are awesome, but I'd prefer the bus with all the windows and the V front (60's) I believe...
Hello from my IPad!
Re: The reason I've not been posting much on here..
Awesome looking car! Great job on it.
ZX450
ZX500
XS2500 x2
XS2300
TI Powercore
PDL1
12" Xmax x3
Zeropoint 5.25 component set
TI 1.0 cap
ZX500
XS2500 x2
XS2300
TI Powercore
PDL1
12" Xmax x3
Zeropoint 5.25 component set
TI 1.0 cap
Re: The reason I've not been posting much on here..
this is where it's up to, just needs final tweeking here and there and a road worth test (MOT as we call it over here) then I can drive it!
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
-
- Itchy Tomato
- Posts: 2299
- Joined: Sat Dec 23, 2006 1:15 am
- Location: TAHITI
- Contact:
Re: The reason I've not been posting much on here..
very nice work Marko .. where's the PG install?
[url=http://www.phoenixphorum.com][img]http://phoenixphorum.com/templates/Titanium/images/logo.jpg[/img][/url]
Re: The reason I've not been posting much on here..
it doesn't have an install yet but I plan to fit one (think I have enough amps spare ), not sure what kit to fit yet but it will be an analogue orientated for sureitchnertamatoa wrote:very nice work Marko .. where's the PG install?
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
- PhuckinGood
- Posts: 245
- Joined: Tue May 24, 2011 1:00 pm
- Location: Bournemouth, England
Re: The reason I've not been posting much on here..
Ooooh shes a beauty, awesome work I love it, would love it even more on air and rims
Alpine CDA-9886R
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
Re: The reason I've not been posting much on here..
she's a 'bute clark!
what else can I say I am a grumpy asshole most of the time.
Re: The reason I've not been posting much on here..
OK, here's where I'm up to with the audio install, PG Ti1 head-unit into a pair of Rockford amps, 225.2 bridged on a Diamond 10" sub and 160.4 bridged to 2 channel on a pair of KEF 8" uni-q's, simple as that at the moment! amps color coded with chrome link and end bells to run with the theme of the car.
I used a bit of braided hose to hide the RCA and power cables for head-unit. don't think I've ever had such a solid fitting head-unit in any car! I made the cradle out of 18mm MDF
waiting for trim to arrive..
I used a bit of braided hose to hide the RCA and power cables for head-unit. don't think I've ever had such a solid fitting head-unit in any car! I made the cradle out of 18mm MDF
waiting for trim to arrive..
Last edited by marko on Fri May 31, 2013 4:31 am, edited 2 times in total.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Re: The reason I've not been posting much on here..
amp rack for rear shelf
old school PG blocks!
rear trunk all finished off now, I used some spare carpet to finish the the rear of the sub box off and hand stitched the edging back on! that took ages as I don't have a sewing machine!
amp trim surround trimmed in head-lining material to match interior. not very stealth but I plan to make a cover for it and it's always garaged anwyay so out of site..
old school PG blocks!
rear trunk all finished off now, I used some spare carpet to finish the the rear of the sub box off and hand stitched the edging back on! that took ages as I don't have a sewing machine!
amp trim surround trimmed in head-lining material to match interior. not very stealth but I plan to make a cover for it and it's always garaged anwyay so out of site..
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Re: The reason I've not been posting much on here..
very nice although I would have faced the sub back myself.
what else can I say I am a grumpy asshole most of the time.
Re: The reason I've not been posting much on here..
I didn't want it facing back as it would have not looked right for me and it works OK as is too which is a bonus.
also, because I only had 10" of depth to play with mounting it on an angle gave me a little more. it would have been very tight on the rear of the enclosure!
also, because I only had 10" of depth to play with mounting it on an angle gave me a little more. it would have been very tight on the rear of the enclosure!
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
- Starunit10
- Posts: 308
- Joined: Thu Mar 29, 2012 3:33 pm
- Location: Ont. Canada