I am going to keep all equipment and go with a 4th order bandpass box. Sealed chamber is 1.35 cu ft, ported chamber is 1.622 after displacment with 60in of square port. The port seperates the sealed chamber and will stick out of the box as well. I'm by no means an expert in google sketchup but these will give you an idea of what the box will look like prior to completion:
View from rear of trunk where plexiglass will be to show back of subs:
Top of the box with the port will come thru rear seat with a custom made ski port into the cabin of the car.:
Pic from front of box looking thru back seat:
The trunk panels will all be reupholestered in black carpet and vinyl and the inside of the box will be red to match the interior of my car. Back of box will have a plexiglass window with my logo etched and lit by leds. My equipment is as follows: 1 1000 watt Massive Audio Class D amp which will run 2 10in Massive Audio RW10's. My other am is Massive Audio 800.4 which will power 5 1/4 in the front doors and 6x9's in the rear. I also will be running an audio control active 2 way x-over, audio control eql eq and audio control bass cube.
Well enough talking, subscribe to the thread if you like as I will take many pics of my update.
Make speaker rings so when mounting subs screws woudlnt show thru the wood.
Ok finally got all the bottom pcs done and the sealed chambers together. As you can see the slot port will seperate the sealed chambers to go the ski pass.
Completed pics of how it will all look once together.
Next step will be to remove screws and putty, caulk edges and then sand. After that I can start adding primer, sanding & then painting. More pics to come, stay tuned!
Added 1st coat of primer and removed screws which would be visible from back. Instead of buying wood putty its easier to make your own. All you need is your sawdust from cutting the wood and some glue and mix it til its like cookie dough. Push into the holes to fill, add some wood glue on top and let it sit til it dries.
Caulked the edges of box to make sure its sealed.
After sitting over night drying, sanded to get ready for more primer.
Added 2nd coat of primer. mdf soaks up alot of paint so I will be doing 3 coats of primer, 1 coat of white paint and then a final coat of red paint.
Hopefully I can get this done in the next day or so and I am waiting on my plexiglass to come ups as well.
Updated pics of box after 3 coats of primer, 1 coat of white paint and then a couple coats of red. Still have to mount leds in box and drill holes for speaker wire.
