Fiat Stilo goes PG

BlaXXun · Post by **BlaXXun** » Sun May 10, 2009 11:22 am

Hello,

this my install of my car.

The Car is a 2006 Fiat Stilo:

The Setup:

MS275 at Scanspeak DT2804/6000 (HT)
MS275 at Diabolo M80 Flat (MT)
MS2125 at Exact M18W (TMT)
MS2250 at Hertz HX 250D (Sub)

HU: Clarion 958 RMC
DSP: Audison BitOne
Powertank: 5 Stinger Caps

More Pictures:

The HT and MT:

The MSs:

BitOne, Fuseholder and 2. Batt:

HU + BitOne Controller:

Flo

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Sun May 10, 2009 11:55 am

Wow, very nice install, wheres pics of the Hertz?

Post by **ttocs** » Sun May 10, 2009 12:27 pm

looks real good, I like it although I can't get into that tweeter pod style mount. I understand it is big in europe and would sound great but it just sticks out too much for me. I am also not sure why you would want to show the creative use of the plumbers tape to help hold them?

BlaXXun · Post by **BlaXXun** » Sun May 10, 2009 12:45 pm

Thanks

Picture of the Hertz follows tomorrow.

I want to show you how the amps are mounted.

We used the Plumbers tape because the screws alone can`t hold that weight of the amps.

Post by **mr tibbs** » Sun May 10, 2009 12:53 pm

I thought the Bit One was for use with factory headunits??

Looks great!

Post by **Wakeup** » Sun May 10, 2009 2:55 pm

Very sexy install... I like it! holding breath for pictures of the sub!

Post by **smgreen20** » Sun May 10, 2009 6:33 pm

Bit one used for all. i have half a mind and no job to get one.

BlaXXun · Post by **BlaXXun** » Sun May 10, 2009 9:44 pm

Not only you can use the BitOne with other HUs too.

The Advantage is that you can set your frontsystem to 3 way active.

Pedi · Post by **Pedi** » Sun May 10, 2009 11:34 pm

Nice pieces, but what is it with the Motorcycle-battery? Why are you using it? It looks to me that you use it as a "carstereo-battery" - and I cannot recommend that....

And mind the heat from the 2250 facing upside down...

BlaXXun · Post by **BlaXXun** » Mon May 11, 2009 12:51 am

That`s no motorcylce battery, that´s a Powercell PC1100 battery.

Yes on Friday I touched the MS2250 after 2 hours music listening.

The MS2150 was at normal working temperature, but the ms 2250 was very hot. I think with a ventilator on the topside i get the heat problem under control.

Gack · Post by **Gack** » Wed May 13, 2009 11:38 pm

@Pedi: that´s not a Motorcycle Batterie.
Ist AGM Technology like Stinger SPV20 oder Kinetik HC600

@ttocs: the screws of the Amp are very close to the side of the cutout. One road irregularity and the screw pull out of the wood.

The bit one can use for every Head Unit (High Level, Low Level oder digital In). He has 8 Chanals with each time alignment, 31 Band Graphic-EQ, X-over, Phaseshift and Outputlevel

BlaXXun · Post by **BlaXXun** » Thu May 14, 2009 12:49 am

Thanks

Gack

Post by **stipud** » Thu May 14, 2009 6:12 am

BlaXX, sehr schoen!

Du musst ja sicher etwas luftkuhlung brauchen mit die MS2250, aber anders sieht es seeehhhrr gut aus!

Die Diablo M80 kenn ich nicht. Wie hoert es aus? Und wie hast du deine crossovers aufgestellt?

gkitching · Post by **gkitching** » Thu May 14, 2009 4:55 pm

That mid in the dash looks very interesting! What is it's model number? Any links to specs?

BlaXXun · Post by **BlaXXun** » Sat May 16, 2009 8:06 am

here`s some information about the mids:
http://www.diaboloworld.de/diam80f.html

Yes cooling of the MS2250 is needed. I will do it next week.

The X-overs are not clearly defined yet. We also check it next week.

Flo

BlaXXun · Post by **BlaXXun** » Mon Jul 27, 2009 11:36 pm

New Sub is installed:

Tymphany LAT 500:

It`s amazing how accurate this sub plays. But the LAT`s big advantage: It isn`t locatable. That is you don`t hear that the LAT is in the trunk. The Bass is present and not behind you.

Flo

Post by **kg1961** » Tue Jul 28, 2009 5:22 am

very nice install. love the deck my wife and sister in law have the same one just the canadain version. 955mc

lopezi · Post by **lopezi** » Tue Jul 28, 2009 5:43 am

How does the Tymphany subwoofer work? What's the premise behind them? I saw that PartsExpress has a sale on the LAT250. I'm unfamiliar with their design. What size enclosure do they require?

chaplin · Post by **chaplin** » Wed Jul 29, 2009 2:02 pm

Anybody has already installed a LAT250 in front doors before?

How do you find your LAT500? You installed it how? Sealed box or vent box? What dimension the your box?

BlaXXun · Post by **BlaXXun** » Wed Jul 29, 2009 3:48 pm

The Size of the box is ca. 70 litres and it`s a vent box.

The sub is very audiophile. Nothing for having fun with bass.

I wanted a Sub, which adjust perfectly to my Frontsystem.

The LAT500: Where the Range of the Tweeters ends, the Wofer starts to work. And at very low Frequencies it`s also very accurate.

In Germany somebody started to install the little LAT250 in front doors, but pictures are not available yet.

Flo

Post by **ttocs** » Wed Jul 29, 2009 5:14 pm

I thought I had read that while it had good output that it could/would bottom out easily on low freqs?

chaplin · Post by **chaplin** » Wed Jul 29, 2009 5:40 pm

You had what as sub before to compare?

Did you compare with IDMAX12 or W6?
70 liters = 2.5 feet / cubes. It is not also small as it...

You took these dimensons: Vented box of 2.5 cubic feet with a 3" diameter vent by 7" long.

Why not to have begun to seal? Sealed box of 0.9 cubic feet. It is much smaller.

Fiat Stilo goes PG

Fiat Stilo goes PG

item

Tymphany Sub?