installing some passive xovers :)

Have a cool car stereo? Post your install pictures here! No PG? No problem! Competition grade or sub-in-box setups: ALL are welcome!
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

installing some passive xovers :)

Post by jbondox »

here is a pic, will show the rest of the system later

but i wanted to post a pic of these things!
Attachments
DSC07356.JPG
DSC07356.JPG (592.63 KiB) Viewed 14776 times
DSC07357.JPG
DSC07357.JPG (600.26 KiB) Viewed 14776 times
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
Audiophiliac
Posts: 918
Joined: Mon Dec 18, 2006 9:41 pm
Location: Boise, ID

Post by Audiophiliac »

Yes...those are some of the sexiest xovers I have seen. The speakers that go with them are just as hot too. :)
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14797
Joined: Fri Dec 19, 2008 9:53 pm

Post by ttocs »

with all the jumpers in there it reminds me of the old xtant amps. The ones you HAD to read the instructions to install, they were sexy too.


You certainly are not going to hide those up in a dash of any of yer benzes are ya???
User avatar
bogart
Posts: 1533
Joined: Thu Dec 18, 2008 6:30 pm
Location: SE PORTLAND

Post by bogart »

:shock: :shock: :shock: Man you just have too love Hertz...had two he series 10's and they kicked ass. those are huge....
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

Audi RS4 and yes they will be hidden. I hide everything now a days. Unless the client states to floss it or the manufacturer gives me the gear for free.

the Audison amp will be hidden also, along with the separates, and the Mille sub... I'd hide the radio to but it wouldn't be easy to operate :)
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14797
Joined: Fri Dec 19, 2008 9:53 pm

Post by ttocs »

such a shame not to show them in some simple but cool way but what can ya do?
User avatar
smgreen20
Posts: 2873
Joined: Wed Dec 20, 2006 11:23 am
Location: Somewhere in Between

Post by smgreen20 »

Mount them in the doors and put a removable cover over them. When the cover is on make it look as though it is a seam?????
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."

Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

why? who cares as long as it sounds great? I wouldn't cut up the doors to install them anyways unless it was a demo vehicle or a customer request... I rather him tell everyone he only has a radio installed :) since it is the only visible sign of a modification
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
User avatar
Bfowler
Briaans..... BRIAAAAANNNNNNS
Posts: 10769
Joined: Wed Dec 06, 2006 11:06 am
Location: So easy, a cavewomen could do him

Post by Bfowler »

its it wrong to want to try and make babies with stereo equipment?
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

Here is the list of stuff



Alpine:



Iva-d505

6 disc DVD changer

IPod interface

Navigation

Bluetooth

Rear seat screens

Sirius interface



Hertz:



MLK2 with x-overs

Mille 10” sub



Audison:



Lrx5.1k



Rear speakers:



Are factory and fed by the alpine headunits’ preouts which feed the Bose amplifier to them



Equipment in the trunk…

Audi RS4 2008 is the ride
Attachments
glassed box
glassed box
DSC07409.JPG (589.31 KiB) Viewed 14646 times
bolted in and some wires ran to/from the crossovers
bolted in and some wires ran to/from the crossovers
DSC07427.JPG (583.45 KiB) Viewed 14646 times
Audison lrx5 channel under the rear deck, cover is off until I am done tuning. welded the rack for it, since MDF is weak for a car...
Audison lrx5 channel under the rear deck, cover is off until I am done tuning. welded the rack for it, since MDF is weak for a car...
DSC07434.JPG (617.03 KiB) Viewed 14646 times
box BOLTED in and has custom 1/4" thick steel brackets
box BOLTED in and has custom 1/4" thick steel brackets
DSC07427.JPG (583.45 KiB) Viewed 14646 times
trim going back on "now you see me"
trim going back on "now you see me"
DSC07433.JPG (441 KiB) Viewed 14646 times
"now you don't" completed
"now you don't" completed
DSC07431.JPG (440.74 KiB) Viewed 14646 times
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

the crossovers...

the Audi had this aluminum rectangle in the back

what better to mount them too, took off the 2 inner ends and made it one for room
Attachments
also the fuse is at the battery
also the fuse is at the battery
DSC07437.JPG (585.11 KiB) Viewed 14645 times
accessed via the 2 10mm factory bolts and I left some slack for adjustment
accessed via the 2 10mm factory bolts and I left some slack for adjustment
DSC07438.JPG (574.16 KiB) Viewed 14645 times
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

this is just some of the random build pics i had, i will take some of the completed install tomorrow or the next day

also I did steering wheel controls and video in motion
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

door speakers are the Mille MLK2's from Hertz... my god the detail and midbass these things have... 100x better than the Morels/PG Elite

Here is a pic I tossed some scrap Hushmat around the factory ABS mounts to add some mass for resonance control... and about 6 sheets to the door panel itself...
Attachments
DSC07289.JPG
DSC07289.JPG (584.19 KiB) Viewed 14643 times
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:

Post by stipud »

Classic Jbondox. Me likey so far 8)
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

I like hiding everything... you really need to hear this to appreciate it though... everything is there, impact, stage, height, volume, output, width, and separation... It'll be here to Thursday if anyone is around
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14797
Joined: Fri Dec 19, 2008 9:53 pm

Post by ttocs »

looks good as usual man, good to see your work again.

Although I am suprised to see you are using scrap pieces. I figured if you didn't have a fresh sheet that was new and unwrinkeled that the germans would stop the delivery at the door.
User avatar
bogart
Posts: 1533
Joined: Thu Dec 18, 2008 6:30 pm
Location: SE PORTLAND

Post by bogart »

isn't the retail on the mille 6.5s like 2 g's....there is a set on ebay for 1200...yikes
User avatar
Misfire
Posts: 1170
Joined: Thu May 14, 2009 12:35 pm
Location: Oregon

Post by Misfire »

Now that's cost effective! Not at my poor ass house! :( :(
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

no scraps, had to cut it at scrap lengths :)

mille is $2k

The eBay ones are used, which I could never buy used.
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

The Germans...LOL

they do have some very nice build quality cars though.
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
User avatar
dcavaudio
Posts: 205
Joined: Fri Jan 12, 2007 2:41 pm
Location: Portland, OR.
Contact:

Post by dcavaudio »

Good job, Jim! How is the family?

It's like DAT!
Enjoying great sight and sound does not have to consume your life savings!

www.dc-connections.com
User avatar
Irongoats
Posts: 245
Joined: Wed Mar 05, 2008 12:25 am
Location: Las Vegas, NV

Post by Irongoats »

Nice install, x-overs look purdy.
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

Thanks,

Dat, all is good, hope all is well with yours.

I changed some stuff at the last minute though, I did end up putting a grill on it, as per the customer request, though for some reason he only wanted it from the handle down??? I will get some pics
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
jbondox
Posts: 374
Joined: Wed Dec 27, 2006 1:53 pm
Location: Ohio
Contact:

Post by jbondox »

here it is done up

Image

and the link to the pics

customer wanted to see the woofer, his call I just obliged

http://www.northolmstedperformance.com/ ... Itemid=208

have fun with it...
James Shields
[email]james@northolmstedperformance.com[/email]
[url]http://www.northolmstedperformance.com[/url]

[img]http://www.northolmstedperformance.com/images/Business_card_front.sized.jpg[/img]
User avatar
bruther
Posts: 607
Joined: Wed Mar 12, 2008 7:18 am
Location: DC
Contact:

Post by bruther »

If you were to install the speakers active, what crossover/signal processor do you use or would you recommend?
1-Phoenix Gold Outlaw
1-Phoenix Gold Bandit
Post Reply