MS1000 display
that's incredible
if only my wife would let me do that!! i'd love a power supply big enough to that justice too 
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
- nico boom
- Deus ex MS

- Posts: 2089
- Joined: Fri Jan 05, 2007 1:40 pm
- Location: the land of wooden shoes
Glad you guys enjoy with me!
And all this started by accident.....
After suddenly selling my best Denon home-amp, I found myself without a home-amp to play music with.
So I just took one of the MS2125's from the "tower of power" in my spare bedroom, connected it to a car battery, and HELL!.... it sounded better!!
This is the result so far.
If your in Holland this May Tom; come over and listen to it.
Compared with what you heard last time, this will make hhmmm..., let's just say a huge upgraded system.
Just listened to it with my wife, and she agrees that it sounds better than the last amps I used.
[if she can hear it, she is either trying to please me, OR it does REALLY sound a lot better!
]
Last thing is to make the interlinks as described, and then enjoy it......while designing the next project.
You're all welcome to come over and listen to it, while enjoying a
[after all it's the SECOND best beer in the world what our Belgium neigbours brew!].
nico
And all this started by accident.....
After suddenly selling my best Denon home-amp, I found myself without a home-amp to play music with.
So I just took one of the MS2125's from the "tower of power" in my spare bedroom, connected it to a car battery, and HELL!.... it sounded better!!
This is the result so far.
If your in Holland this May Tom; come over and listen to it.
Compared with what you heard last time, this will make hhmmm..., let's just say a huge upgraded system.
Just listened to it with my wife, and she agrees that it sounds better than the last amps I used.
[if she can hear it, she is either trying to please me, OR it does REALLY sound a lot better!
Last thing is to make the interlinks as described, and then enjoy it......while designing the next project.
You're all welcome to come over and listen to it, while enjoying a
[after all it's the SECOND best beer in the world what our Belgium neigbours brew!].
nico
- martinkruit
- Posts: 429
- Joined: Sat Jan 05, 2008 2:06 am
- Location: The Netherlands
nico
When Tom is in Holland and he is coming over to your place, maybe its fun to make it a PG Lunatic meeting.
Didier and other Belgium an Dutch PG fans come over?
I bring beer. HEINEKEN

When Tom is in Holland and he is coming over to your place, maybe its fun to make it a PG Lunatic meeting.
Didier and other Belgium an Dutch PG fans come over?
I bring beer. HEINEKEN
[img]http://phoenixphorum.com/files/phoenixg_970.gif[/img]
Mac 200
Ti 500.2 (Tube pre)
M25 )np cover)
M25, M44, M50, M100, EQ215 (chrome)
QX 2350 x 2
Bass Cube
KLW Image Enhance
KLW Kathedral
Soundstream Reference Class A 10.0
Mac 200
Ti 500.2 (Tube pre)
M25 )np cover)
M25, M44, M50, M100, EQ215 (chrome)
QX 2350 x 2
Bass Cube
KLW Image Enhance
KLW Kathedral
Soundstream Reference Class A 10.0
- nico boom
- Deus ex MS

- Posts: 2089
- Joined: Fri Jan 05, 2007 1:40 pm
- Location: the land of wooden shoes
There are more reasons to use these car-amps in my home-setup.
First is; why collect them, and stash them away somewhere in your home where you can't enjoy them...?
Second; these amps sound very good compared to a lot of home-audio gear that is on the market today; I would have to spend a LOT more money to get this sound with high-end stuff powered by the wall-socket.
Third; amongst high-end fans, it is well-known that the power from any wall socket is a very contaminated one, when looked at what it carries with it ,into your equipment.
Looking at setups which are reviewed as the best sounding in the world, You will see either a huge[very costly] power-filter [or more; one for each unit], OR; amps, and pre-amps WORKING ON BATTERIES!.
I have been listening to different setups, and components for many years [mostly changing setup 5-8 time a year], but after listening to these amps, I was surprised right away.
Fourth; [and last
]; I can keep on experimenting with different amps; for each glass plate in my audio-rack has it's own power-connection, and rca cables just run through the middle.
That's what's FUN about in this hobby; I'M NEVER DONE!!!
Thanks for sharing the fun,
nico
First is; why collect them, and stash them away somewhere in your home where you can't enjoy them...?
Second; these amps sound very good compared to a lot of home-audio gear that is on the market today; I would have to spend a LOT more money to get this sound with high-end stuff powered by the wall-socket.
Third; amongst high-end fans, it is well-known that the power from any wall socket is a very contaminated one, when looked at what it carries with it ,into your equipment.
Looking at setups which are reviewed as the best sounding in the world, You will see either a huge[very costly] power-filter [or more; one for each unit], OR; amps, and pre-amps WORKING ON BATTERIES!.
I have been listening to different setups, and components for many years [mostly changing setup 5-8 time a year], but after listening to these amps, I was surprised right away.
Fourth; [and last
That's what's FUN about in this hobby; I'M NEVER DONE!!!
Thanks for sharing the fun,
nico
i'm still holding out for an original nickel plated one
looks like i'll be waiting a while!!
looks like i'll be waiting a while!!
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
nico boom wrote:There are more reasons to use these car-amps in my home-setup.
First is; why collect them, and stash them away somewhere in your home where you can't enjoy them
nico
PG stuff is made for beeing used
Kenwood DDX5016DAB
In stock awaiting install ideas
Alpine 7893R
PG Rsd 65cs
2 PG M100
2 12" Xmax
PG Bass Cube Special Edition
PG Xmax 10"
Old School CVIT15.0DVC
PG M50
PG M44
PG M25 Special Edition
PG Xenon 6,5"
PG TiDD10 + Sld44
PG ZX 475TI (Needs check, bought as blown)
In stock awaiting install ideas
Alpine 7893R
PG Rsd 65cs
2 PG M100
2 12" Xmax
PG Bass Cube Special Edition
PG Xmax 10"
Old School CVIT15.0DVC
PG M50
PG M44
PG M25 Special Edition
PG Xenon 6,5"
PG TiDD10 + Sld44
PG ZX 475TI (Needs check, bought as blown)
- nico boom
- Deus ex MS

- Posts: 2089
- Joined: Fri Jan 05, 2007 1:40 pm
- Location: the land of wooden shoes
HEHE!! It's playing already.....
This amp is even more powerfull than my first one; I had to adjust the gains of my pre-amp.
Also noticable ofcourse, is this amp runs warmer than the other.
I asked Eric about the amp before I bought it, and he told me that besides his custom-made transformers, and the higher rail voltage, he changed the pre-amp section to "in theory"play down to DC.
In my setup it will not have to, since that part is taken care of by the other MS2250.
I have a wonderfull idea about displaying them both....will be back.
[when my marriage survives this]
This amp is even more powerfull than my first one; I had to adjust the gains of my pre-amp.
Also noticable ofcourse, is this amp runs warmer than the other.
I asked Eric about the amp before I bought it, and he told me that besides his custom-made transformers, and the higher rail voltage, he changed the pre-amp section to "in theory"play down to DC.
In my setup it will not have to, since that part is taken care of by the other MS2250.
I have a wonderfull idea about displaying them both....will be back.
[when my marriage survives this]
If it destroys your marriage i'll come to Holland and pick it up from you (destroying my marriage
)
Kenwood DDX5016DAB
In stock awaiting install ideas
Alpine 7893R
PG Rsd 65cs
2 PG M100
2 12" Xmax
PG Bass Cube Special Edition
PG Xmax 10"
Old School CVIT15.0DVC
PG M50
PG M44
PG M25 Special Edition
PG Xenon 6,5"
PG TiDD10 + Sld44
PG ZX 475TI (Needs check, bought as blown)
In stock awaiting install ideas
Alpine 7893R
PG Rsd 65cs
2 PG M100
2 12" Xmax
PG Bass Cube Special Edition
PG Xmax 10"
Old School CVIT15.0DVC
PG M50
PG M44
PG M25 Special Edition
PG Xenon 6,5"
PG TiDD10 + Sld44
PG ZX 475TI (Needs check, bought as blown)