My MS2K BMW 325TDS-built not finished car broke down-

Post by **joerg** » Wed Jun 23, 2010 11:51 am

Marcelbofh wrote:Awesomeness

Any idea on the door/kick panels yet?

One corner after the other my friend!

Post by **ttocs** » Thu Jun 24, 2010 1:55 am

will they close fit behind the amp racks?huh?

Post by **joerg** » Thu Jun 24, 2010 2:02 am

ttocs wrote:will they close fit behind the amp racks?huh?

The trunk is about 3 feet in lenght. There is enough space left

Pedi · Post by **Pedi** » Thu Jun 24, 2010 10:02 pm

* subscribed *

jbob0124 · Post by **jbob0124** » Fri Jun 25, 2010 6:20 am

Looks like a good start to me.

Post by **joerg** » Fri Jun 25, 2010 1:51 pm

Today i welded the support frame into the trunk, did the bottom plate and started with the plates where the distros and other ACC. sit and do their job.

Marcelbofh · Post by **Marcelbofh** » Fri Jun 25, 2010 1:57 pm

Niiiiice, must... see... more... pics...
I will shut up about the front/kickpanels for now, but man I'm curious how this trunk will unfold next.

Wtg dude, keep the pics coming please

Post by **ttocs** » Fri Jun 25, 2010 3:01 pm

is the other cyclone a stealth install?

12voltjunky · Post by **12voltjunky** » Fri Jun 25, 2010 8:55 pm

Lookin' Good

ZTwenty8SSR · Post by **ZTwenty8SSR** » Fri Jun 25, 2010 9:46 pm

joerg wrote:
If i can´t fit two of them i´ll make em fit!

Isn't that what widebody kits were invented for?
make room for huge sub boxes?

Post by **joerg** » Sun Jun 27, 2010 11:50 am

ttocs wrote:is the other cyclone a stealth install?

Just had to wait for it to grow out of the ground plate. Took a few day´s

Today i test fitted the amps and marked the holes for wiring and stuff.

jbob0124 · Post by **jbob0124** » Sun Jun 27, 2010 11:52 am

Just putting in those amps makes it jump out at you. Looks good.

eulogious · Post by **eulogious** » Sun Jun 27, 2010 12:30 pm

That's sick man! Those cyclones are going to kick ass, I can't wait to see them in the floor!

Keep it up dude!

Post by **ttocs** » Sun Jun 27, 2010 12:32 pm

is there 6 cu ft of air under the floor? I can't picture the small-fridge-sized enclosure that those beasts will need. Using the false floor and the space behind the amps?That does look cool as shit though man!

can ya angle them up just a hair to make them easier to see?

str3atwarrior · Post by **str3atwarrior** » Sun Jun 27, 2010 2:19 pm

Damn i like the look of thoses amps!

Keep up the good work!

Pedi · Post by **Pedi** » Wed Jul 14, 2010 10:12 pm

Any updates yet?

Post by **joerg** » Thu Jul 15, 2010 12:58 am

Pedi wrote:Any updates yet?

I was destracted by a few things lately and i didn´t feel like doin something to the car. On top of that i´ll have to leave austria for an inspection in switzerland tomorrow and won´t have a day off soon

Post by **joerg** » Wed Aug 25, 2010 3:42 pm

So i dug out my old RCA-Connectors today and decided to take the old wire out and get em ready for some Super Triple Shielded Zeropoint wire.

28 little fellas ready to go into my BMW

Post by **joerg** » Mon Sep 20, 2010 5:44 am

Since this was on hold the last few weeks because of more important stuff and buying more stuff to go into this install i´m able to make some more progress the next few days.

I managed to get another cyclone and the missing distros thanks to fellow members from the UK named marko and bhavp21.

The biggest change will be that i´m going to take the Nickel out of the car and replace it with the doctors wife (a white oldschool MS1000)

The Nickel will come to good use in my living room mounted in my shroud and run my Focal Home Speakers

Still waiting for some parts to come in but thanks to Matt, ttocs, and JK it won´t be long now.

JK · Post by JK » Mon Sep 20, 2010 6:21 am

glad i could help. i got what i was lookin for, so i thought it was the rite thing to do. i cant use all of what i have

i hope u enjoy it..

Post by **joerg** » Fri Sep 24, 2010 10:25 am

Today i tested all the distros i got together and worked on my enclosure for the clones. Unfortunally my batteries died before i could take pictures of the actual enclosure. But the distros are fun to look at!

ShockTherapy · Post by **ShockTherapy** » Fri Sep 24, 2010 10:31 am

Brings tears to my eyes... **sniff**

so beautiful. Those amps look like candy to me... I just can't stop looking at them.

Post by **joerg** » Fri Dec 10, 2010 2:59 pm

Since vacation is coming close i bought a set of used doorboards for my BMW and started working on how to fit the TI9´s in the doors. Will made my own rings next week and start the fun fiberglass work after i finish them.

Post by **ttocs** » Fri Dec 10, 2010 3:06 pm

wow yours looks like it will be harder then mine. my door panels are plastic and stick out 4-5 inches on the bottom so I am just going to cut the bottom portion out and then build a shallow enclosure of wood/glass infront of the door membrane.

Any idea how big of an enclosure is ideal on these? I was just reading that they should be x-over from 40-150/200 hz.

Post by **joerg** » Fri Dec 10, 2010 3:10 pm

ttocs wrote:wow yours looks like it will be harder then mine. my door panels are plastic and stick out 4-5 inches on the bottom so I am just going to cut the bottom portion out and then build a shallow enclosure of wood/glass infront of the door membrane.

Any idea how big of an enclosure is ideal on these? I was just reading that they should be x-over from 40-150/200 hz.

The door panels from BMW are bitches for sure.

The recommended enclosure size for the TI9´s is 0,1 to 0,4 cuft. The bigger the lower u can go with the freuquency.

My MS2K BMW 325TDS-built not finished car broke down-

Re: My MS2K BMW 325TDS

Re: My MS2K BMW 325TDS

Re: My MS2K BMW 325TDS