Page 1 of 1
MIDBASS...goddamn peppy too...
Posted: Thu Jul 23, 2009 1:28 pm
by bogart
Just got thses done in and somewhat tuned. First part of my fiberglass work...first the interior...then I'll pull the trunk back out and frame it in a weekend for the start of racks and such.
The woofers are RE Audio sx 8s...d4's running two ohms. They are running off the sub channels of a 900.7 through a crossfire 3 way and are x's over at 50 and 360...works well. I can't isolate the ti 15's at all. It sounds so so so much better. The 8's are vibrating my front floor boards and are each in .35 net...punchy. the 15's are running 10 to 50hz now and that is that...
enjoy the pics folks
Posted: Thu Jul 23, 2009 1:44 pm
by tonym
not a ride for ppl with big feet...
Nice work though
Posted: Thu Jul 23, 2009 1:49 pm
by bogart
yes,,,,they are big. The driver has a 4 and 3/4 mounting depth and a hefty motor. Could have gone shallow mount but I prefer the sound of a traditional driver on a good crossover over the actual midbass drivers out there
Thanks
item
Posted: Thu Jul 23, 2009 1:50 pm
by kg1961
how does it sound with the 8 not firing the same way? I have just seen most with the same angle. Im sure you can make it 100% with a rta
Nice work
Posted: Thu Jul 23, 2009 1:56 pm
by bogart
If they are at the same angle the drivers will cancel one another out. While being a directional driver, it is still a lower frequency and pans out thru the front well. I would like the driver side at a little steeper angle but size wise it is where I could pull it off. am not sure what it'll do on an rta....I just started this because xenon's arn't really made to see below 70 and the sub really stood out in the back...so this was the cure for that and it did indeed pull the stage forward....can't hear the 15s at all unless I just intentionally rail the db on the 15s.
It sounds pretty good to me for half ass tuning and there are a mess of gains to deal with...eventually I will find the balance and rta it...for now it is just fun
item
Posted: Thu Jul 23, 2009 2:01 pm
by kg1961
cool sorry I ment that they both angle up or side ways not so they cancel but so they sound the same I would think in this set up you would get a little more mid bass sound from the right but I sure you fell more from the left
very nice good work
Posted: Thu Jul 23, 2009 2:01 pm
by joerg
Nice work bogart! I used to have two 6.5´s in the same spot in my last car. And if it comes to middbass there is really nothing better than just a nice little sub in the doors or the legroom!

Posted: Thu Jul 23, 2009 2:09 pm
by davewaibel
better than dealing with the ti 9s with the open backed pods-
Posted: Thu Jul 23, 2009 2:09 pm
by bogart
I havn't really noticed it but I tuned each side by sound too...no prob...I've seen folks aim em right at one another....
joerg...is that a focal 10 in the door there....YES!!!! I thought about running two 6.5 xenons down there band pass for a xenon 3 way but the sub won out. thanks folks.....
Posted: Thu Jul 23, 2009 2:12 pm
by bogart
I agree dave...took a bit of work but well worth the effort
Posted: Thu Jul 23, 2009 2:17 pm
by joerg
Those were my 11inch focals! A really kick ass system i had in there! I hope i get as much as that out of the TI 9´s
item
Posted: Thu Jul 23, 2009 2:29 pm
by kg1961
OMG
I wish I had a car with room for 11" subs in the doors thats carzy
but very nice
Posted: Thu Jul 23, 2009 2:56 pm
by Misfire
Looks great Bogart, sure do look nicer now that they are done. Looking forward to hearing them soon. And now you have the kid thinking about mount those kicker 12's in his doors! LOL
Posted: Thu Jul 23, 2009 3:22 pm
by ttocs
looks good other then the size but what can ya do? Sometimes form follows function....
They bring a whole new definition to kick panels. You will want some kind of grill over them would be my biggest concern.
Posted: Thu Jul 23, 2009 4:55 pm
by bogart
I've got grills for em...have to paint em and figure out how to mount it as there isn't much room around the ring...I may try to cut some alluminum mesh with an mdf slip on cover that fits the outer ring of the pod. I want to re do the upolstery on them...that is felt beleive it or not and it works well...so I glued it down and stretched it....cut the back and threw a couple light coats of paint over it....stiff and shows any and all dirt....but it works and was cheap.
center channel pod and door pods are next....then the rear deck...then the trunk...I am thinking the trunk will be 95% mdf and carpet....but it is a start...
Posted: Fri Jul 24, 2009 6:10 am
by Thunderdome
looks good Bogart

must be bass heaven in there now , but what are you running for highs to keep up with that bottom end?
Posted: Fri Jul 24, 2009 6:24 am
by dwnrodeo
Nice, I'm extremely jealous! I am in need of some 8's or 9's up front but don't have the room because of my clutch. Great job!
Posted: Fri Jul 24, 2009 9:21 am
by Wakeup
Nice Chris....using almost all my gear!

I'll come by next week and check it out!