Page 1 of 1
plan for my stang
Posted: Sat Apr 03, 2010 10:00 am
by todd217
here is the plan for my mustang.
head unit alpine cda 9887
fronts ID xs57 componets powered of my zx500 or maybe 2 zx500s
rear polk db571 powered of h/u
sub ti elite 12d powered by ti 1200.1 in a sealed box
all of it has been purchased i just need to wait for it to show up.
Posted: Sat Apr 03, 2010 3:35 pm
by ttocs
does it have a mach or shaker system in it"?
Posted: Sat Apr 03, 2010 3:42 pm
by todd217
ttocs wrote:does it have a mach or shaker system in it"?
no it does not.
Posted: Sat Apr 03, 2010 3:52 pm
by AVICJR
What year Mustang?
Posted: Sat Apr 03, 2010 3:56 pm
by todd217
98 coupe
Posted: Sat Apr 03, 2010 4:02 pm
by AVICJR
You're going to have fun getting the box in there. My suggestion is to assemble the box in the trunk.
Also, you can disassemble the rear seat to get more clearance through the rear, but it still won't be enough room for a Ti Elite sub box.
The Ti will KILL inside a small Mustang.
Posted: Sat Apr 03, 2010 4:23 pm
by todd217
i know how much of a pain it is. i managed to get a box for my 3 10w6s in there.
Posted: Sat Apr 03, 2010 4:26 pm
by AVICJR
After I disassembled the back seat, I even cut some of the lip off of the opening to get more clearance.
Posted: Sat Apr 03, 2010 9:27 pm
by ttocs
I built a box for a single 12 in my buddy's 96 stang. It was the first time I ever thougth I built and covered a box that was not going to fit. We had to remove the rubber seal that went around the trunk and it just barely fit in.
Do you use the back seat? Plenty-o-room back there and easy to mount it as well.... I have been dreaming of a cyclone in my 94s back seat if I can fit the 3 cubes it needs. I hate putting people back there anyway as they just complain about no space, while I am thinking the same.
Re: plan for my stang
Posted: Tue Apr 06, 2010 9:17 pm
by SLICK
todd217 wrote:here is the plan for my mustang.
head unit alpine cda 9887
fronts ID xs57 componets powered of my zx500 or maybe 2 zx500s
rear polk db571 powered of h/u
sub ti elite 12d powered by ti 1200.1 in a sealed box
all of it has been purchased i just need to wait for it to show up.
If you need help , Let me know ... Your just down the interstate a little bit from me .....
Posted: Wed Apr 07, 2010 5:21 pm
by todd217
thx slick i just need time and decent weather.
Posted: Thu Apr 29, 2010 12:21 pm
by todd217
update on the stang. i sat the ti12d in the trunk to get an idea of where to put it and could not find anything to my liking. so i have decided to give the rsdc12 another chance and order a pair of 122s. i can use the same box design that my w6s were in that was just over 2cuft. and it still gives me plenty of trunk.