95' Honda Civic...Updated 06 Dec 2018...

Have a cool car stereo? Post your install pictures here! No PG? No problem! Competition grade or sub-in-box setups: ALL are welcome!
Post Reply
stuartyp
Posts: 188
Joined: Sat Aug 02, 2008 12:10 pm

Re: Install V3...95' Honda Civic...Updated 20 Feb 2012 w\vid

Post by stuartyp »

looks stunning mate :clap: :clap:
Alpine F#1 headunit
Alpine F#1 processor
Alpine F#1 screen
Morel supremos
Morel cdm 88 mids
Phoenix gold ti 9s
Phoenix gold ti 900.7
Phoenix gold ti 1000.2
User avatar
onecrazy95civic
Posts: 831
Joined: Sun Feb 11, 2007 11:41 am
Location: Fossambault-sur-le-Lac, Québec
Contact:

Re: Install V3...95' Honda Civic...Updated 12 May 2012 w\vid

Post by onecrazy95civic »

Hello everyone it has been a while since last update. Been very busy with work and just got back from a nearly two months military exercise. Now I’m back working on the civic. Just got the airbrush done on some of the parts and looks sick!!! I know this might not be the place but I would like to say thank you to Fitto of http://www.airbrushfitto.com for the work, it’s simply incredible and to Sébastien of Demers Custom for hooking me up!!! More pics to come... :wink:
Attachments
Door panel speaker pod...
Door panel speaker pod...
Door panel speaker pod...
Door panel speaker pod...
Close up...
Close up...
Close up...
Close up...
IPAD 2 Trim panel...
IPAD 2 Trim panel...
Close up...
Close up...
Dash pod...
Dash pod...
Close up...
Close up...
Next project...Rear brake light and roof light...
Next project...Rear brake light and roof light...
PHOENIX GOLD
1.Reactor x3 #109, #407 & #496
2.Ti EQ30 x2
3.TiBasscube
4.TiDD10
5.TiPowercore 20
6.TLD66
7.Ti15 DVC x2
8.Ti5 Elite x4
9.Ti9 Elite
10.R-Link boxes x6 w/digital guages x12
11. Ti Distribution blocks (Power x4 & Ground x1)
ALPINE
1.TME-M750a x5
2.TMX-R1000 x3
OTHERS
1. IPAD 2
2. 32" LED Screen
3. PS3
SilverGT
Posts: 286
Joined: Sun Jun 26, 2011 2:15 pm

Re: Install V3...95' Honda Civic...Updated 12 May 2012 w\vid

Post by SilverGT »

DANG!
User avatar
onecrazy95civic
Posts: 831
Joined: Sun Feb 11, 2007 11:41 am
Location: Fossambault-sur-le-Lac, Québec
Contact:

Re: Install V3...95' Honda Civic...Updated 13 May 2012 w\vid

Post by onecrazy95civic »

A little bit more on the roof liner project...
Attachments
Roof Liner 4.JPG
Roof Liner 3.JPG
Roof Liner 2.JPG
PHOENIX GOLD
1.Reactor x3 #109, #407 & #496
2.Ti EQ30 x2
3.TiBasscube
4.TiDD10
5.TiPowercore 20
6.TLD66
7.Ti15 DVC x2
8.Ti5 Elite x4
9.Ti9 Elite
10.R-Link boxes x6 w/digital guages x12
11. Ti Distribution blocks (Power x4 & Ground x1)
ALPINE
1.TME-M750a x5
2.TMX-R1000 x3
OTHERS
1. IPAD 2
2. 32" LED Screen
3. PS3
SilverGT
Posts: 286
Joined: Sun Jun 26, 2011 2:15 pm

Re: Install V3...95' Honda Civic...Updated 13 May 2012 w\vid

Post by SilverGT »

looks good. the signs are going in the headliner?
User avatar
onecrazy95civic
Posts: 831
Joined: Sun Feb 11, 2007 11:41 am
Location: Fossambault-sur-le-Lac, Québec
Contact:

Re: Install V3...95' Honda Civic...Updated 13 May 2012 w\vid

Post by onecrazy95civic »

SilverGT wrote:looks good. the signs are going in the headliner?
Yes it will be mold in the headliner.
PHOENIX GOLD
1.Reactor x3 #109, #407 & #496
2.Ti EQ30 x2
3.TiBasscube
4.TiDD10
5.TiPowercore 20
6.TLD66
7.Ti15 DVC x2
8.Ti5 Elite x4
9.Ti9 Elite
10.R-Link boxes x6 w/digital guages x12
11. Ti Distribution blocks (Power x4 & Ground x1)
ALPINE
1.TME-M750a x5
2.TMX-R1000 x3
OTHERS
1. IPAD 2
2. 32" LED Screen
3. PS3
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14783
Joined: Fri Dec 19, 2008 9:53 pm

Re: Install V3...95' Honda Civic...Updated 13 May 2012 w\vid

Post by ttocs »

honestly not sure about the airbrushing, everything looks so clean and modern and then that art looks old/cracked?

Still lovin it though...
what else can I say I am a grumpy asshole most of the time.
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:

Re: Install V3...95' Honda Civic...Updated 13 May 2012 w\vid

Post by stipud »

Looks awesome! :thumbs:
User avatar
kg1961
Got wood?
Posts: 9051
Joined: Sun Apr 06, 2008 10:31 pm
Location: Calgary

Re: Install V3...95' Honda Civic...Updated 13 May 2012 w\vid

Post by kg1961 »

stipud wrote:Looks awesome! :thumbs:
x2 very cool
most of my gear is gone :liar:
2020 honda accord sport
User avatar
jbob0124
Posts: 825
Joined: Sat Apr 24, 2010 1:09 pm
Contact:

Re: Install V3...95' Honda Civic...Updated 13 May 2012 w\vid

Post by jbob0124 »

Looks good to me, I like the paint job...
User avatar
onecrazy95civic
Posts: 831
Joined: Sun Feb 11, 2007 11:41 am
Location: Fossambault-sur-le-Lac, Québec
Contact:

Re: Install V3...95' Honda Civic...Updated 22 May 2012 w\vid

Post by onecrazy95civic »

What you guys think? Once all shape should looks good... Tomorrow...shaping it all up.
Attachments
photo 2.JPG
photo 1.JPG
PHOENIX GOLD
1.Reactor x3 #109, #407 & #496
2.Ti EQ30 x2
3.TiBasscube
4.TiDD10
5.TiPowercore 20
6.TLD66
7.Ti15 DVC x2
8.Ti5 Elite x4
9.Ti9 Elite
10.R-Link boxes x6 w/digital guages x12
11. Ti Distribution blocks (Power x4 & Ground x1)
ALPINE
1.TME-M750a x5
2.TMX-R1000 x3
OTHERS
1. IPAD 2
2. 32" LED Screen
3. PS3
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14783
Joined: Fri Dec 19, 2008 9:53 pm

Re: Install V3...95' Honda Civic...Updated 22 May 2012 w\vid

Post by ttocs »

pretty cool man I am considering something similar for my trunk lid.
what else can I say I am a grumpy asshole most of the time.
SilverGT
Posts: 286
Joined: Sun Jun 26, 2011 2:15 pm

Re: Install V3...95' Honda Civic...Updated 22 May 2012 w\vid

Post by SilverGT »

love it.
User avatar
stipud
Voltage Ohms
Posts: 14719
Joined: Sat Nov 26, 1983 4:00 am
Location: Burnaby, BC
Contact:

Re: Install V3...95' Honda Civic...Updated 22 May 2012 w\vid

Post by stipud »

Looks nuclear alright :D
Lux
Posts: 94
Joined: Thu Jul 21, 2011 10:51 am

Re: Install V3...95' Honda Civic...Updated 22 May 2012 w\vid

Post by Lux »

Any new pictures?
User avatar
onecrazy95civic
Posts: 831
Joined: Sun Feb 11, 2007 11:41 am
Location: Fossambault-sur-le-Lac, Québec
Contact:

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by onecrazy95civic »

Lux wrote:Any new pictures?
You're absolutely right, it's has been a while since I last posted pictured. Well to be honest I got saturated with the stereo install so I took most of summer off the project but I wasn't totally at idle. We got the suspension, brake conversion to an Acura type R and all the re-routing of the brake components and custom brake lines completed. Last week got back on the project itself (stereo) and here are some pictures, just got everything back from being covered, i.e. door panels, rear panels, etc… the dash is now gone to get covered and should get it back by end month. Also I’m re-shuffling a little bit the rear lay-out, not by much, just making it more to my liking which means I have to wait for some trays to get back from paint (pics to come), also I had to re-do the Powercore area it wasn’t to my liking. You can see some of the early stage of the work in the pics below. The wiring of the system is also a nightmare, wiring 3 PG Reactor amps that are motorized is not as easy as someone might think and add a motorized trunk that house numerous PG components makes it even more challenging :shock: . More pics to come but it won’t be until I’m back from another military exercise that I’ve to attend to :hurr: (sarcasms), which should end mid-November.
Attachments
One of the 2 batteries...
One of the 2 batteries...
The other one...
The other one...
Some of the wiring nightmare...
Some of the wiring nightmare...
The custom brake lines panel. All brake components are re-located inside the car and all brake lines had to be custom made.
The custom brake lines panel. All brake components are re-located inside the car and all brake lines had to be custom made.
photo 4.JPG
photo 3.JPG
The Powercore early stage of re-positionning it, etc...
The Powercore early stage of re-positionning it, etc...
photo 1.JPG
Rear panels with a 10" Alpine screen and PG digital displays,
Rear panels with a 10" Alpine screen and PG digital displays,
Door panels...
Door panels...
Door panels...
Door panels...
PHOENIX GOLD
1.Reactor x3 #109, #407 & #496
2.Ti EQ30 x2
3.TiBasscube
4.TiDD10
5.TiPowercore 20
6.TLD66
7.Ti15 DVC x2
8.Ti5 Elite x4
9.Ti9 Elite
10.R-Link boxes x6 w/digital guages x12
11. Ti Distribution blocks (Power x4 & Ground x1)
ALPINE
1.TME-M750a x5
2.TMX-R1000 x3
OTHERS
1. IPAD 2
2. 32" LED Screen
3. PS3
User avatar
shawn k
Posts: 757
Joined: Thu Apr 01, 2010 2:33 pm
Location: Maine

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by shawn k »

Wow man.. amazing install! Crazy Civic indeed!!!!
AKA "THE HATER"
User avatar
Drock
Posts: 1846
Joined: Wed May 23, 2012 4:44 pm
Location: Canada

Install V3...95' Honda Civic...Updated 04 Sept 2012 w\videos

Post by Drock »

Wow. That's the kind of work I want to do. If only there was some space for the kids. Hmmm
Lux
Posts: 94
Joined: Thu Jul 21, 2011 10:51 am

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by Lux »

Hold on while I clean the drool up off of the keyboard... That is a sweet set up.

Oh, my bad, that wasn't drool... :oops:
User avatar
kg1961
Got wood?
Posts: 9051
Joined: Sun Apr 06, 2008 10:31 pm
Location: Calgary

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by kg1961 »

this looks much nicer than the last one 100%
great work!!!!!!!!!!!!!
most of my gear is gone :liar:
2020 honda accord sport
User avatar
jbob0124
Posts: 825
Joined: Sat Apr 24, 2010 1:09 pm
Contact:

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by jbob0124 »

Man, wish I had the time, money and skills to do something like that. Looks great.
User avatar
robolop
Posts: 31
Joined: Fri Dec 28, 2012 12:03 pm

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by robolop »

I smell carbon and epoxy...........

Image
GO 4 IT
User avatar
JayGold
Posts: 566
Joined: Tue Apr 27, 2010 8:57 am
Location: Midwest

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by JayGold »

This install:

Image
14 PG amps from M/MS/ZX/Ti/LE and counting....the addiction continues...
Lux
Posts: 94
Joined: Thu Jul 21, 2011 10:51 am

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by Lux »

I usually don't give installs much notice, but yours is truly a work of art. I give my respect on your car. Keep up the good work. :drool:
User avatar
onecrazy95civic
Posts: 831
Joined: Sun Feb 11, 2007 11:41 am
Location: Fossambault-sur-le-Lac, Québec
Contact:

Re: Install V3...95' Honda Civic...Updated 04 Sept 2012 w\vi

Post by onecrazy95civic »

Hey guys, been a while since I posted pics and/or updates. I was out of town for a while and I also made a big decision I re-shuffle the layout in the back to the original plan. Here are some pics of the new layout, not much changes but it still took a bit of time to carry them out. I never like the layout that was done originally by my installer; he didn't want to do what was drawn by me. Anyway to make a story short I decided to make the change and now it looks a lot better and it flows better. So here's a sneak peek, a lot more has been done since those pics where taken...also check out the dash...if you think it looks sick on the ground imagine in the car...!!! More pics to come... :wink:
Attachments
photo 8.JPG
photo 10.JPG
photo 9.JPG
photo 7.JPG
photo 7.JPG (83.64 KiB) Viewed 10483 times
photo5.JPG
photo5.JPG (83.3 KiB) Viewed 10483 times
photo 6.JPG
photo 6.JPG (126.27 KiB) Viewed 10483 times
PHOENIX GOLD
1.Reactor x3 #109, #407 & #496
2.Ti EQ30 x2
3.TiBasscube
4.TiDD10
5.TiPowercore 20
6.TLD66
7.Ti15 DVC x2
8.Ti5 Elite x4
9.Ti9 Elite
10.R-Link boxes x6 w/digital guages x12
11. Ti Distribution blocks (Power x4 & Ground x1)
ALPINE
1.TME-M750a x5
2.TMX-R1000 x3
OTHERS
1. IPAD 2
2. 32" LED Screen
3. PS3
Post Reply