planning my install
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
planning my install
planning my first serious install.....what do you think??? ..some things that should be changed??? input wellcome...
tweeters-6.5" and 8 " in front doors......12" in back.....
ms 2125 will be changed for another zxti600 when i stumble across it.....
should i put another 6.5" in back?
tweeters-6.5" and 8 " in front doors......12" in back.....
ms 2125 will be changed for another zxti600 when i stumble across it.....
should i put another 6.5" in back?
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
Re: planning my install
it will be hard to match two subs running off of different amps.
what else can I say I am a grumpy asshole most of the time.
Re: planning my install
Agreed! If you get another ZX600Ti then 1 to each sub or both subs running off the solo MS2125.ttocs wrote:it will be hard to match two subs running off of different amps.
Re: planning my install
tough call as to which I would want between the zx and ms line
what else can I say I am a grumpy asshole most of the time.
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
i know its not the ideal choise...and the ms is only untill i get hold of another 600......but not many for sale in denmark
running both subs on the ms is not an option i wanna choose.....then it would go in 1ohm.....(dual 4ohms subs)
running both subs on the ms is not an option i wanna choose.....then it would go in 1ohm.....(dual 4ohms subs)
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
planning my install
Why not just find a nice mono amp that can handle a single ohm? Instead of running multiple amps. I have an rsd1200.1 pushing 4 ti10d4's at 1ohm.
Alot of people don't seem to like the looks of these (I do), I have gone up and down the hi way several times now on an 8 hr road trip and worked the subs hard. The amp did not shut down once.
Even the ti800.1 handled two dvc's efertlessly.
Alot of people don't seem to like the looks of these (I do), I have gone up and down the hi way several times now on an 8 hr road trip and worked the subs hard. The amp did not shut down once.
Even the ti800.1 handled two dvc's efertlessly.
Re: planning my install
cool I have been wondering how my RSD 1200.1 would run on my 3 rsdc 10s at 1 ohm. I am going to have a fan on it but sounds like its a forcast of as much bass as I want.
Would it be cheaper on import taxes to send you the amp in two pieces listed as parts or would shipping kill that though?
Would it be cheaper on import taxes to send you the amp in two pieces listed as parts or would shipping kill that though?
what else can I say I am a grumpy asshole most of the time.
planning my install
I would just ship it together if you can pack it very well. Thanks
planning my install
Lol. My wife bought an antique sink from like Florida or something awhile ago. It was like 225 pounds. The sink was $250, but shipping was $900 when I picked it up. So I learned my lesson the hard way.
planning my install
Hey guys. I have a question. I'm designing my box on paper here. I will be using four ti10d4's. From what I can figure these are 100% at 1.25cu ft ported. Because of the limited space in my truck I can squeeze a total of 5 cu ft of volume but I cannot build individual chambers. My question is do I still calculate volume based on individual specs per driver. Or is it less because the subs will be using common space.
This is the first time I've built an enclosure like this so I just want to get your opinions.
Thanks
This is the first time I've built an enclosure like this so I just want to get your opinions.
Thanks
planning my install
Nice
- Attachments
-
- ImageUploadedByTapatalk1341290467.261905.jpg (55.12 KiB) Viewed 13308 times
Last edited by Drock on Tue Aug 07, 2012 5:01 am, edited 1 time in total.
- PhuckinGood
- Posts: 245
- Joined: Tue May 24, 2011 1:00 pm
- Location: Bournemouth, England
Re: planning my install
I have a zx600ti in the UK not perfect but okay, not sure what the postage is, maybe a swop deal?tattooemil wrote:i know its not the ideal choise...and the ms is only untill i get hold of another 600......but not many for sale in denmark
running both subs on the ms is not an option i wanna choose.....then it would go in 1ohm.....(dual 4ohms subs)
Alpine CDA-9886R
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
PG ZX250v1
PG ZX350v2
PG ZX450v1
PG Elite .65cs
PG QX 5.25
PG Ti12 sub x2
planning my install
Sorry I just realized I put my post in the wrong thread. Oops
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
can i find you on facebook?... im martin emil christensen .... www.facebook.com/martin.e.christensen.73PhuckinGood wrote:I have a zx600ti in the UK not perfect but okay, not sure what the postage is, maybe a swop deal?tattooemil wrote:i know its not the ideal choise...and the ms is only untill i get hold of another 600......but not many for sale in denmark
running both subs on the ms is not an option i wanna choose.....then it would go in 1ohm.....(dual 4ohms subs)
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
got hold of some extra ti gear....so this is the first pictures of my install....
1 475ti for front and rear
2 600ti for 2 12" xmax
still remaining in stock is a 475ti (maybe for some 8" mid subs in front doors) and a 600ti (maybe 1 extra 12" xmax instead of spare wheel)
but man its loud allready....
1 475ti for front and rear
2 600ti for 2 12" xmax
still remaining in stock is a 475ti (maybe for some 8" mid subs in front doors) and a 600ti (maybe 1 extra 12" xmax instead of spare wheel)
but man its loud allready....
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
planning my install
Cool. I bet it will look great when your done. I like the idea of stacking the amps.
Re: planning my install
what are the black thinks holding the shelf up with?
what else can I say I am a grumpy asshole most of the time.
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
the black things...uhm just wire tie´s that´s not been cut off yet ......the shelfs is resting on "forks" from stainless steel i will snap some more shots of the installation during the finish.....first off all i need to have measured if the main power wire can take one more amp.. 50# ( 0 awg) wire with 200 amp fuse.....
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
- ludeboost98
- Posts: 117
- Joined: Tue Feb 15, 2011 12:53 pm
- Location: Baltimore , MD
Re: planning my install
Great job , Can I put a recommendation in ? I would angle those boxes to eliminate cancellation , or just not fire them not straight at each other . Keep up the good work !
1x MS1000TA
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
1x MS2250 schrouded
1X MPS2500
1x MAC500 (MS2125 plate)
1x ZPA0.5 Black
1x ZX950 Black
1x Titanium 1200.1Ti
1x Titanium 600.2Ti
1x Titanuim 500.4Ti
1x EQ15x
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
sad news....just crashed my car a week ago. ..... .....its amazing all the time it took to install...just took me 30 minutes to pull it apart before the car was towed away....
my new ride is a vw transporter (t4) ....but its gonna stock the same amount of amps and speakers...but this time in that little drivers cabin....
my new ride is a vw transporter (t4) ....but its gonna stock the same amount of amps and speakers...but this time in that little drivers cabin....
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
-
- Posts: 46
- Joined: Tue Mar 31, 2009 6:55 am
Re: planning my install
get a mono amp maybe 1200.1 ti threw away the 4ch ti use the ms on the midbass and the ti600 on the mid/high chapeu
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
got new plans....i been chasing for amps lately and got hold of some gear...so this is the new plan....
2* 600ti running 2* 12" xmax subs....
1* 1000.2ti running 2* 8" midbass
2* 475 running front components
all split by eq and 406
2* 600ti running 2* 12" xmax subs....
1* 1000.2ti running 2* 8" midbass
2* 475 running front components
all split by eq and 406
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
planning my install
That's lots of amps. Lol
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
its a big car
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
-
- Posts: 44
- Joined: Sat Jun 16, 2012 2:27 pm
Re: planning my install
actually here is my layout....anyone spot problems/improvements? ....what would YOU use as frequencies at the zpx2 (im thinking 60/80 and 300 )
ms 2125
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2
zx475ti x2
zx600ti x3
zx1000.2ti
eq232(yellow)
eq215
ax406
zpx2
pld1
12" xmax x3
boston 8,4lf x2