my new 2012 Camaro 2SS/RS

teamradrz1 · Post by **teamradrz1** » Wed Feb 15, 2012 9:45 pm

ok finally got the synergy pkg installed on my Camaro so I can share some pics.

knightrider358 · Post by **knightrider358** » Thu Feb 16, 2012 7:42 am

Thats sick lookin man!!!!!!!

I want one!!!!!!

Just need the Knightrider scrolling red LED in that hoodscoop and BAM!!!!!

Post by **stipud** » Thu Feb 16, 2012 7:58 am

That looks friggin meannnnn!!

Any stereo plans, or just the integrated sub?

teamradrz1 · Post by **teamradrz1** » Thu Feb 16, 2012 8:16 am

knightrider358 wrote:

Thats sick lookin man!!!!!!!

I want one!!!!!!

Just need the Knightrider scrolling red LED in that hoodscoop and BAM!!!!!

they sell one with a remote for like $50 thought it might be cool for car shows and cruise ins but just borderline between tacky and cool

teamradrz1 · Post by **teamradrz1** » Thu Feb 16, 2012 8:18 am

stipud wrote:That looks friggin meannnnn!!

Any stereo plans, or just the integrated sub?

I'm trying to get PG to sponser my car to demo their products at local dealerships and car stereo places, so right now waiting.

Post by **ttocs** » Thu Feb 16, 2012 11:09 am

teamradrz1 wrote:
knightrider358 wrote:

Thats sick lookin man!!!!!!!

I want one!!!!!!

Just need the Knightrider scrolling red LED in that hoodscoop and BAM!!!!!
they sell one with a remote for like $50 thought it might be cool for car shows and cruise ins but just borderline between tacky and cool

I would say leaning on tacking, pretty well propped up aginst it.

teamradrz1 · Post by **teamradrz1** » Fri Feb 17, 2012 1:52 pm

getting windows, headlights and tail lights tinted and having clear bra installed and having the gold portion of the chevy logos blacked out.
it's gonna be SICK!!!

teamradrz1 · Post by **teamradrz1** » Sun Feb 19, 2012 12:03 am

Here it is tinted and clear bra'd

teamradrz1 · Post by **teamradrz1** » Sat Apr 07, 2012 11:37 am

Finally got my PG i system installed for some better tunes!

Installed custom LED painted side marker lights (blacked out)

Installed MBRP 3" catback exhaust with X-pipe and rectangle tips to fit the ground effects kit

Still need CAI intake and technostalgia sequential LED tail lights

SilverGT · Post by **SilverGT** » Wed Apr 11, 2012 8:44 pm

dang thats sick bud! any install pix of the PG system?

teamradrz1 · Post by **teamradrz1** » Wed Apr 11, 2012 9:06 pm

SilverGT wrote:dang thats sick bud! any install pix of the PG system?

not yet I lost my camera, I guess I could take pics with my phone but that never does it justice.

I just got my blacked out LED side markers installed and my catback MBRP exhaust installed as well so need to update the pics and a vid of the exhaust note as well, nice deep low rumble.

SilverGT · Post by **SilverGT** » Wed Apr 11, 2012 9:07 pm

ya they make great cat back systems.

freshkryp69 · Post by **freshkryp69** » Thu May 31, 2012 2:02 pm

teamradrz1 wrote:
SilverGT wrote:dang thats sick bud! any install pix of the PG system?
not yet I lost my camera, I guess I could take pics with my phone but that never does it justice.

I just got my blacked out LED side markers installed and my catback MBRP exhaust installed as well so need to update the pics and a vid of the exhaust note as well, nice deep low rumble.

BADASS!!! I really like the ground effects!! good job!
My neighbor down the street has the ss, we just installed a complete kooks long tube dual exhaust with no cats...man it sounds wicked! Kooks aint cheap either but well worth the money!

I tell ya, the LS engine is the best engine ever made! sooo easy to find the hp, hell with stock cnc ported heads they are good for 700hp! thats bad ass and miles ahead of the coveted old school double hump 202 small chamber head!

teamradrz1 · Post by **teamradrz1** » Thu Jun 07, 2012 2:27 pm

Here's some more photos of some cosmetics completed to set ip apart from the others.

Post by **stipud** » Thu Jun 07, 2012 9:26 pm

I think you should stick with the carbon theme on the front instead of the skull vinyl... that part felt a bit off to me. And wasn't KITT a Trans Am?

Not a big deal... looks mean!

teamradrz1 · Post by **teamradrz1** » Thu Jun 07, 2012 9:36 pm

it was a test piece and looks fantastic in person, everyone that has seen it in person asked why I did carbon fiber. I have since dipped the entire wiper cowl with the skulls which evens out the engine compartment nicely and put in a factory strut tower bar and had it painted to match my hood stripes. I need to repaint the black on the engine cover and I have silver vinyl chevrolet letters to go on top.

Post by **ttocs** » Thu Jun 07, 2012 9:46 pm

I had to agree with the skulls. They look cool but it is a bit much.

Drock · Post by **Drock** » Wed Jun 20, 2012 12:13 pm

Looks bad ass. I'm jealous with or without the skulls.

teamradrz1 · Post by **teamradrz1** » Thu Jun 21, 2012 3:10 pm

Drock wrote:Looks bad ass. I'm jealous with or without the skulls.

Thanks, can't please everyone!

Haakon · Post by **Haakon** » Thu Jun 21, 2012 3:13 pm

Guess what that car costs in Norway (with taxes based on weight, power and emissions)

teamradrz1 · Post by **teamradrz1** » Thu Jun 21, 2012 3:22 pm

Haakon wrote:Guess what that car costs in Norway (with taxes based on weight, power and emissions)

I have no idea I can tell you I'm into it about $45K

Haakon · Post by **Haakon** » Thu Jun 21, 2012 4:02 pm

http://www.finn.no/finn/car/used/object ... e=34399439

Then add another $132,000 in taxes for a total of $177,000 (1,048,000NOK) :0

GREAT looking car, must be amazing to own such a beauty

Edit; that car in the ad is a 2010, add another $30k for a brand new one (taxes are based also on how old the car is)

ROBSCUSTOMSAPK · Post by **ROBSCUSTOMSAPK** » Fri Jun 22, 2012 8:52 pm

I like it. Looks mean. Ls motors are awesome. I was amazed at this cars 0-100 capability. How does the pg setup sound?

ZTwenty8SSR · Post by **ZTwenty8SSR** » Sun Jun 24, 2012 7:52 am

The pieces that you put on your door panel are they real carbon fiber ?
Do they wrap around the bottom of the panel a little or do they stop at the edge ?
Where did you get them ?

teamradrz1 · Post by **teamradrz1** » Sun Jun 24, 2012 8:44 am

ZTwenty8SSR wrote:The pieces that you put on your door panel are they real carbon fiber ?
Do they wrap around the bottom of the panel a little or do they stop at the edge ?
Where did you get them ?

Yes they are real carbon fiber, no they don't wrap around only cover the flat depressed section of the door, and I got them on ebay if you look be carefull to read the post because the vendor sells both real carbon fiber and fiber wraped pieces.