MY M44 PROJECT

Post by **fuzzysnuggleduck** » Tue May 26, 2009 9:08 am

I agree, here. I think gold silk screen would tie in the heatsink better than any another colour.

Post by **mhyde71** » Sat May 30, 2009 7:58 pm

well i have now secured my "rough around the edges" M100... just matter of time to have it matching paint like the 44...

Will be ready shoon fella's!

@RANDY- just as reminder / check-in, did you shoot out those terminals connectors... anxious now that i can see light at the end of te tunnel

scottn29 · Post by **scottn29** » Sat May 30, 2009 8:14 pm

cant wait to see them all matched up

Marcotah · Post by **Marcotah** » Fri Jun 05, 2009 7:21 am

scottn29 wrote:cant wait to see them all matched up

2...
Nice paintjob and color matching will be great...

Misfire · Post by **Misfire** » Fri Jun 05, 2009 7:29 am

Nice pair, will look great together once done!

Post by **ttocs** » Fri Jun 05, 2009 1:27 pm

the white terminals are out of place though. grab some paint or a sharpie and hit them.

Thumper88 · Post by **Thumper88** » Fri Jun 05, 2009 2:10 pm

ttocs wrote:the white terminals are out of place though. grab some paint or a sharpie and hit them.

http://www.ritdye.com/Liquids.28.51.5.9.lasso

Misfire · Post by **Misfire** » Fri Jun 05, 2009 2:18 pm

Are you sure that dye would be absordered enough?

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Fri Jun 05, 2009 3:45 pm

Misfire wrote:Are you sure that dye would be absordered enough?

GX3 dyes his and they look great.

Post by **mhyde71** » Sun Jun 07, 2009 8:37 am

OKAY MAKING SOME HEAD WAY WITH GETTING THINGS BUTTONED UP!!!!

Stripped the M100 today along with some other goodies I plan on pc'ing...

have a look....

Post by **mhyde71** » Sun Jun 07, 2009 8:46 am

Black terminals should be here shortly... white and will get RIT Dye'd and made to black....
Here is a sample / sneak peak of artwork I am thinking of...

PLEASE any/ALL input is welcome... SHOULD I go with RCA CABLE logo? Kinda thinking i would like to just keep it simple as possible for the silkscreening process, so one/two...mayyybe three colors max.

Should I have hand made USA logo?
Should I maybe have phoenix on one amp and Gold on another?

BEAR IN MIND, a buddy needed my help for moving so i have to run..., and this is simply where i left off, but wanted/was anxious to show off...

faizai · Post by **faizai** » Sun Jun 07, 2009 8:49 am

awesome!!man,really nice look!

Post by **mhyde71** » Mon Jun 08, 2009 8:01 am

GETTING THERE... leaps and bounds... too bad i need top sleep and work- it sux! BUT getting closer to having the M series artwork...

Jason if your reading this I am kinda counting on you for the some of the top stuff... but lets see which way i actually go with this here...whether or not i use the artwork i have or what you have Havent decided as of yet...

spiritofnorway · Post by **spiritofnorway** » Mon Jun 08, 2009 8:43 am

Maybe it helps to continue ..

Post by **mhyde71** » Mon Jun 08, 2009 9:35 am

WOW THANKS A MILLION SPIRIT

SO WHAT DO PPL SAY / THINK???

Shall I use OEM artwork to the "T"??? Or like i am creating with a lil custom aspect to it??? I like the fact that model is indicated on the amp of course... but is it really neccessary??? WHAT DO FOLKS THINK????

oldskoolmseriesfan · Post by **oldskoolmseriesfan** » Mon Jun 08, 2009 10:17 am

"Phoenix Gold Matt series"

spiritofnorway · Post by **spiritofnorway** » Mon Jun 08, 2009 11:05 am

Before-after

Post by **mhyde71** » Mon Jun 08, 2009 11:18 am

very very nice Spirt!

Good show/job!

Excited to get my pair all buttoned up!
I just love the 4 channel and 2 channel combo amp pairs...

I may just use the labeling from the file, and/or continue with my own... but thinking i am going to just use the "phoenix gold" as shown above... BUT nice to have the OEM if I need it though...! I will make silkscreens up of it, and have it available for printing in the shop...!

Marcotah · Post by **Marcotah** » Mon Jun 08, 2009 11:43 am

spiritofnorway wrote:Maybe it helps to continue ..

Fantastic man!
Would like to thanks you cuz it can help me a lot too...
But, don't you have the M25 series I or II?
Thanks!

spiritofnorway · Post by **spiritofnorway** » Mon Jun 08, 2009 11:54 am

M25.....

Post by **mhyde71** » Mon Jun 08, 2009 11:57 am

pm sent ot you spirit!

Marcotah · Post by **Marcotah** » Mon Jun 08, 2009 12:01 pm

spiritofnorway wrote: M25.....

Thanks again bro!
I really thought that you shouldn't have, but I'm glad you have...
I was waiting only to find it to make a new paintjob on my couple of M's...
Thanks!
Does anyone know how can I make a new color matching on this image?
I'm not a Pc guru...Hehe...

Post by **mhyde71** » Mon Jun 08, 2009 12:42 pm

Marcotah wrote:
spiritofnorway wrote: M25.....
Thanks again bro!
I really thought that you shouldn't have, but I'm glad you have...
I was waiting only to find it to make a new paintjob on my couple of M's...
Thanks!
Does anyone know how can I make a new color matching on this image?
I'm not a Pc guru...Hehe...

how do you mean?? OEM color matching ??
Check here for color pallets / codeing on some if not most colors anyways-
http://download.phoenixphorum.com/Logos ... d%20logos/

Marcotah · Post by **Marcotah** » Mon Jun 08, 2009 12:49 pm

mhyde71 wrote:
Marcotah wrote:
spiritofnorway wrote: M25.....
Thanks again bro!
I really thought that you shouldn't have, but I'm glad you have...
I was waiting only to find it to make a new paintjob on my couple of M's...
Thanks!
Does anyone know how can I make a new color matching on this image?
I'm not a Pc guru...Hehe...
how do you mean?? OEM color matching ??
Check here for color pallets / codeing on some if not most colors anyways-
http://download.phoenixphorum.com/Logos ... d%20logos/

Was wondering if I can put that "Team Phoenix Gold" logo (just like your avatar), that came in TA's limited on the usual "Phoenix Gold" on my M's, think it would be a nice matching. Also, I'd paint them on Black and Pink (Dissipators, where is yellow anodized from factory).

Post by **mhyde71** » Mon Jun 08, 2009 1:08 pm

SO you want a black and pink combination amp color(s)???

I have a semi gloss black powder coat I could do and a top clear coat with pink metal flake if you would like.. simliar to the way my M44 looks up above, but with just the pink flake... then the sink could get powder coated pink... and the TEAM GOLD LOGO could be silkscreened on to it.

LMK, i can help with all of that if you would like.. just need the base, cover, and heat sink sent to me... or I could help you do it yourself if you would like... lmk