Hey all, new to the forum and had a quick question...My brother picked up an M50 for free that WAS working when it was pulled from the previous car, it has good ground, power and signal but the only time he gets any bass is when he turns the gain quickly back and forth. I pulled the cover to check for anything that might be burnt up but found nothing. Any ideas on how i could fix it or maybe test it for something?
new pots i reckon, either bass or gain pots are dodgy..
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
"Pots" are OKA potentiometers (dials/sliders that, "typically" adjust analog signals, i.e. sound levels, freq, etc...) IOW the small little dials that you are having issues with are AKA "pot(s)"- short for potentiometers.
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
good luck 