Sneak Peek

andy600rr · Post by **andy600rr** » Mon Nov 23, 2009 9:06 pm

Brian, not to step on any toes... but you did say 4 ohm SVC subs (plural).

MW3 · Post by **MW3** » Mon Nov 23, 2009 9:38 pm

Bfowler wrote:
did you just dodge my question of what to use for decent power on a 4ohm sub?

Sorry I thought you meant two SVCs and one amplifier. What exactly do you have?

Post by **Bfowler** » Mon Nov 23, 2009 9:53 pm

MW3 wrote:
Bfowler wrote:
did you just dodge my question of what to use for decent power on a 4ohm sub?

Sorry I thought you meant two SVCs and one amplifier.

What exactly do you have?

SVC titanium 12

MW3 · Post by **MW3** » Mon Nov 23, 2009 10:35 pm

Rear channels of the largest 4 channel amps will provide 400+ watts at 4 ohm bridged. I know that might not be exactly what you are looking for but its an option.

We can't give away SVC high powered subs or two channels. Its just state of the market right now. Everyone (well almost everyone) wants a monoblock that will power a DVC woofer(s).

Maybe you need to apply to the beta test program for the new woofers.

itchnertamatoa · Post by **itchnertamatoa** » Mon Nov 23, 2009 10:50 pm

beta test program for new woofers ????
where do I sign up?

Juice0723 · Post by **Juice0723** » Mon Nov 23, 2009 10:54 pm

I am for sure getting the new line amps. Probably subs as well. Your going to be shipping to Canada direct?

Misfire · Post by **Misfire** » Tue Nov 24, 2009 3:08 am

itchnertamatoa wrote:beta test program for new woofers ????
where do I sign up?

X2

Mackenzie · Post by **Mackenzie** » Tue Nov 24, 2009 5:47 am

Mackenzie wrote:
MW3 wrote:The top of the amp is flat, except the gentle slope on the front.

Cosmetic is clean but classy similar to original Ti amplifiers.

These amps are not small in size or power. Smallest mono block in this series is 1500 watts, smallest four channel is 100 x 4.
Just curious, how many monoblocks will there be, and how many 4 channel amps will there be in this top line?

MW3 · Post by **MW3** » Tue Nov 24, 2009 6:14 am

Two monoblocks and two four channels in upper line.

Four amps, simple and clean line.

A 5/6 channel is something we might consider for the future.

Mackenzie · Post by **Mackenzie** » Tue Nov 24, 2009 6:27 am

MW3 wrote:Two monoblocks and two four channels in upper line.

Four amps, simple and clean line.

A 5/6 channel is something we might consider for the future.

Ah.. I smell a 2kw+ amp in the makings

Post by **Rold Gold** » Tue Nov 24, 2009 7:09 am

BETA BETA BETA!!!!!!!!!!!!

dwnrodeo · Post by **dwnrodeo** » Tue Nov 24, 2009 7:23 am

MW3 wrote:Two monoblocks and two four channels in upper line.

Four amps, simple and clean line.

A 5/6 channel is something we might consider for the future.

The 5/6 channel should be your LE amp if you do decide to do one in the future. Traditionally the LE amps have been designed to run an entire system and I believe this one should be no different. Just my $.02

Post by **kg1961** » Tue Nov 24, 2009 7:44 am

The 5/6 channel should be your LE amp if you do decide to do one in the future. Traditionally the LE amps have been designed to run an entire system and I believe this one should be no different. Just my $.02

I agree 100% with the statment!!! so are us Canadains going to have dealers? Soundsaround/Audio conecept in Calgary used to sell them and ARA was able to sell the wires but no one in some time has had pg...

Post by **stipud** » Tue Nov 24, 2009 7:49 am

kg1961 wrote:
The 5/6 channel should be your LE amp if you do decide to do one in the future. Traditionally the LE amps have been designed to run an entire system and I believe this one should be no different. Just my $.02
I agree 100% with the statment!!! so are us Canadains going to have dealers? Soundsaround/Audio conecept in Calgary used to sell them and ARA was able to sell the wires but no one in some time has had pg...

Does Best Buy still have Ryvals? Oh man some of the "experts" that approached me there... oh man...

Post by **kg1961** » Tue Nov 24, 2009 7:54 am

I think they sold out and also they had older octane.
I have to say i have never went to a store like that for car audio as most guys there didn't know anything
the day of A&B sound and Audio Concept in the SE even Vision but it seem like those time are gone

deathcloud · Post by **deathcloud** » Tue Nov 24, 2009 9:34 am

Woah woah woah! Easy on the best buy peeps! I am one of those. But I have to say, if it wasn't for this car audio phorum, I would probably be on of those people haha. But yea I learned a lot and I am the expert back there.

But yea morgan please please please see about getting Best Buy some of your maybe lower end line. Or something. We need better amps. And more affordable.

NewOldStock · Post by **NewOldStock** » Tue Nov 24, 2009 11:35 am

FuzzyHoNutz wrote:BETA BETA BETA!!!!!!!!!!!!

X 1000000000

deathcloud · Post by **deathcloud** » Tue Nov 24, 2009 11:51 am

I call beta tester. I am in florida so close to ur warehouse hopefully! And would love to test it out. Let me know!

Plus I work for best buy so could get the word out on how great these amps/subs are

Post by **Bfowler** » Tue Nov 24, 2009 12:01 pm

MW3 wrote:Rear channels of the largest 4 channel amps will provide 400+ watts at 4 ohm bridged. I know that might not be exactly what you are looking for but its an option.

We can't give away SVC high powered subs or two channels. Its just state of the market right now. Everyone (well almost everyone) wants a monoblock that will power a DVC woofer(s).

Maybe you need to apply to the beta test program for the new woofers.

i guess i did say "subs" thanks for clarifying though

i can do that. that makes sense. can even run my rsdc122's at 1ohm.

trckydve · Post by **trckydve** » Tue Nov 24, 2009 12:08 pm

Shotgun BETA tester!

Post by **ttocs** » Tue Nov 24, 2009 12:24 pm

trckydve wrote:Shotgun BETA tester!

I gotta shotgun and been looking for a tester

! When I yell pull, run as fast like hell(insert running smiley here)!

dako · Post by **dako** » Tue Nov 24, 2009 1:53 pm

Put me down as a Beta Tester for sure if it comes to fruition. I'm right down the street from AAMP, over in Safety Harbor.

Post by **Bfowler** » Tue Nov 24, 2009 2:39 pm

ttocs wrote:
trckydve wrote:Shotgun BETA tester!
I gotta shotgun and been looking for a tester ! When I yell pull, run as fast like hell(insert running smiley here)!

ZING!

Mackenzie · Post by **Mackenzie** » Tue Nov 24, 2009 3:09 pm

Speaking of beta, I have 5kw+ of power to dispose of, so if you have any high power handling subs, I can test them for sure.

Post by **bdubs767** » Tue Nov 24, 2009 5:41 pm

o just give us 8 channel fully tunable DSP at an affordable price.

Sneak Peek

item

Re: item

item