almost complete
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
almost complete
so far my search for my gear is almost complete
eclipse 8545
3x ti 600.2
1x ti 1000.2
ti bass cube
ti 5 comp set
ti 6.5 comp set
zero point reference II pcc-occ rca cables
what im getting
ti fuse blocks and ground blocks
ti 9
ti 5 to replace a blown ti
what im missing
ti caps or ti powercore or alumna pro cap
bat isolator
if anyone can think of things im missing let me know. so my search can keep going
the main question that i have is now that i got my hands on a ti9's i was going to use the extra 600.2 to power them. ive never mixed passive with active so im confused on how to make it work with my setup i hope thats a good setup but im not too sure. if anyone has better experience and i know most of u do and u also have the free time to help me out with a wiring diagram on what u would do it would help me a bunch.
eclipse 8545
3x ti 600.2
1x ti 1000.2
ti bass cube
ti 5 comp set
ti 6.5 comp set
zero point reference II pcc-occ rca cables
what im getting
ti fuse blocks and ground blocks
ti 9
ti 5 to replace a blown ti
what im missing
ti caps or ti powercore or alumna pro cap
bat isolator
if anyone can think of things im missing let me know. so my search can keep going
the main question that i have is now that i got my hands on a ti9's i was going to use the extra 600.2 to power them. ive never mixed passive with active so im confused on how to make it work with my setup i hope thats a good setup but im not too sure. if anyone has better experience and i know most of u do and u also have the free time to help me out with a wiring diagram on what u would do it would help me a bunch.
3x ti600.2, 1x ti1000.2 (hidding in the closet),1x 6.5 ti elite comp (front), 1x 5.25 ti elite comp (back), 2x XO crossovers, 2x tantrumX dual 4 ohm, zero point full power+ ground wiring
6x pc-ccc zero point rca
storage for the rest of my stuff
6x pc-ccc zero point rca
storage for the rest of my stuff
- dedlyjedly
- Silent but Dedly
- Posts: 1212
- Joined: Thu Dec 07, 2006 7:03 pm
- Location: Las Vegas
A band-pass can be accomplished as simply as passing the rca output from the amp powering your passive two-way into the amp for your Ti9 midbass drivers. Just adjust the "config" switch on the first amp so that it selects high-pass for the amp itself and low-pass for the output. I'd recommend setting the filter somewhere in the neighborhood of 150-200hz. Then just set up the filter on the second amp as a high-pass around 60-80hz and voila! 24dB/octave band-pass!
You may have other options or more flexibility with the Eclipse deck (I'm not familiar with it) or other external processors, but I've had great luck using the crossovers on the Ti amps in that configuration for the TiElite three-way setup.
You may have other options or more flexibility with the Eclipse deck (I'm not familiar with it) or other external processors, but I've had great luck using the crossovers on the Ti amps in that configuration for the TiElite three-way setup.
- oldskoolmseriesfan
- Sherlock Homey
- Posts: 2517
- Joined: Sun Oct 19, 2008 10:03 pm
- Location: WEST SIIIIDE!!
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
yeah the xo crossovers i got a pair
atm im running 3 600.2 all the cables and 6.5 and 5.25 in the front
atm im running 3 600.2 all the cables and 6.5 and 5.25 in the front
3x ti600.2, 1x ti1000.2 (hidding in the closet),1x 6.5 ti elite comp (front), 1x 5.25 ti elite comp (back), 2x XO crossovers, 2x tantrumX dual 4 ohm, zero point full power+ ground wiring
6x pc-ccc zero point rca
storage for the rest of my stuff
6x pc-ccc zero point rca
storage for the rest of my stuff
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
I have the Eclipse CD8455 and would much rather have the 8545, like the looks of it better.
My wife got me the 8455 for my birthday 5 yrs ago so I still have to keep it, sentimental reasons.
My wife got me the 8455 for my birthday 5 yrs ago so I still have to keep it, sentimental reasons.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
i love my head unit. only its giving me that problem where it starting to say error 3 disk read error
3x ti600.2, 1x ti1000.2 (hidding in the closet),1x 6.5 ti elite comp (front), 1x 5.25 ti elite comp (back), 2x XO crossovers, 2x tantrumX dual 4 ohm, zero point full power+ ground wiring
6x pc-ccc zero point rca
storage for the rest of my stuff
6x pc-ccc zero point rca
storage for the rest of my stuff
lol, mine too. When it's supposed to say "reading..." and flashes, it doesn't. It's intermittent and drives me nuts. At some point I'm going to send it in for repair.
"ZPA's will have the same sound essentially as you get from the MS, they just feature a bigger shinier set of balls."
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
Install:
http://phoenixphorum.com/viewtopic.php?f=10&t=16998
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
i might jut give up and end up getting a diffrent head unit. unless i can get my hands on a mkII
3x ti600.2, 1x ti1000.2 (hidding in the closet),1x 6.5 ti elite comp (front), 1x 5.25 ti elite comp (back), 2x XO crossovers, 2x tantrumX dual 4 ohm, zero point full power+ ground wiring
6x pc-ccc zero point rca
storage for the rest of my stuff
6x pc-ccc zero point rca
storage for the rest of my stuff
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
If u only knew how many lens cleaning CDs and it did t help at all
3x ti600.2, 1x ti1000.2 (hidding in the closet),1x 6.5 ti elite comp (front), 1x 5.25 ti elite comp (back), 2x XO crossovers, 2x tantrumX dual 4 ohm, zero point full power+ ground wiring
6x pc-ccc zero point rca
storage for the rest of my stuff
6x pc-ccc zero point rca
storage for the rest of my stuff
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
i really dont feel like tearing up my head unit. i know once i go there it will NEVER play cds again
speaking of head units whats the correct way of testing the rca output to see the pre out voltage
speaking of head units whats the correct way of testing the rca output to see the pre out voltage
3x ti600.2, 1x ti1000.2 (hidding in the closet),1x 6.5 ti elite comp (front), 1x 5.25 ti elite comp (back), 2x XO crossovers, 2x tantrumX dual 4 ohm, zero point full power+ ground wiring
6x pc-ccc zero point rca
storage for the rest of my stuff
6x pc-ccc zero point rca
storage for the rest of my stuff