what about a new enclosure

rednike · Post by **rednike** » Tue Nov 16, 2010 2:05 am

Hi Guys:

Really appreicated all your comments, I am now thinking of building another enclosure box that is smaller and hopefully it can create more bass!! Can anynody give me some advice the size of the ported enclosure? I listens to hip-hop / R & B / Trance music most of the time...

Post by **stipud** » Tue Nov 16, 2010 7:13 am

For MORE bass you want a large ported box with a big port.

rednike · Post by **rednike** » Tue Nov 16, 2010 5:50 pm

stipud wrote:For MORE bass you want a large ported box with a big port.

The ported box I am using now is 18"x16"x22" but its taking too much space and some member in the forum told me that is way too big for a single 12" stroker sub...

Post by **smgreen20** » Tue Nov 16, 2010 6:35 pm

Depends on what Gen the Stroker sub is. If it's an original, they're space hogs. I don't have any real world experience w/the newer Gens.

Post by **ttocs** » Tue Nov 16, 2010 7:54 pm

for more bass at a particular note you will get it from large ported enclosure. I prefer a nice sealed enclosure myself as you can always get more/different bass from electrinic tuning if you want a gain at a particular freq.

rednike · Post by **rednike** » Tue Nov 16, 2010 10:56 pm

ttocs wrote:for more bass at a particular note you will get it from large ported enclosure. I prefer a nice sealed enclosure myself as you can always get more/different bass from electrinic tuning if you want a gain at a particular freq.

Actually my 12D2 was installed in the sealed enclosure before but I can barely get any bass from it and so thats why I modify the enclosure to ported which improve the sound volume and SQ a lot...

rednike · Post by **rednike** » Tue Nov 16, 2010 10:57 pm

smgreen20 wrote:Depends on what Gen the Stroker sub is. If it's an original, they're space hogs. I don't have any real world experience w/the newer Gens.

My one are the old school version which with yellow/orange paper cone...

Post by **ttocs** » Tue Nov 16, 2010 11:01 pm

you can always try a basscube, it would be easier then a new box.

rednike · Post by **rednike** » Wed Nov 17, 2010 12:35 am

ttocs wrote:you can always try a basscube, it would be easier then a new box.

Yes, I bold one from Money.B...will install it next month and hopefully it will satisfy my needs!!

Post by **ttocs** » Wed Nov 17, 2010 1:05 am

if you read in the instructions, you will probably be better off with the sq setting. Set the Q to low which will give a bigger selection of frequencies available to be boosted. Have you found the cube secrets stuff to allow you to give up to 18 db of boost rather then 12?

rednike · Post by **rednike** » Wed Nov 17, 2010 1:26 am

ttocs wrote:if you read in the instructions, you will probably be better off with the sq setting. Set the Q to low which will give a bigger selection of frequencies available to be boosted. Have you found the cube secrets stuff to allow you to give up to 18 db of boost rather then 12?

Hey Thanks and no, I have not yet study the cube but will do that when I have time...

I am think about install the cube and TLD 66 next month when I have more time...also thinking about replace the outlaw with ZX475 Ti for front & rear too...

Post by **ttocs** » Wed Nov 17, 2010 2:22 am

boosting the input voltage would also mean more output.