i now have 4 problems that i need to fix. if anyone knows how i can fix them or if they are fixable then ill be a very happy camper.
1. my ti tweeter was pushed in by my daughter. washwithgas was saying to suck it out with a shop vac but if anyone has a secret let me know
2. one of my ti6 baffle became unglued but after looking at it deeper the spider glue has come off too. once again if the speaker is fixable even with a spider that has become loose i will love u forever.
3. need to replace the rear ti5 (almost there with a current item from member)
4. need a ground lug cock n ball style
im almost debating getting rid of my phoenix gold ti sets just because its becoming such a burden to get everything working
dilema
- dontlookatme
- Posts: 676
- Joined: Thu Mar 18, 2010 2:34 pm
- Location: SO-CAL
dilema
3x ti600.2, 1x ti1000.2 (hidding in the closet),1x 6.5 ti elite comp (front), 1x 5.25 ti elite comp (back), 2x XO crossovers, 2x tantrumX dual 4 ohm, zero point full power+ ground wiring
6x pc-ccc zero point rca
storage for the rest of my stuff
6x pc-ccc zero point rca
storage for the rest of my stuff
1. I had a similar problem with a TI tweeter as well. You ca take a small needle with a very fine tip to pull it back out.
2. Not really a problem if it didn´t come loose all the way. Just get yourself some glue for fixing spiders and everything from robotunderground or another source that recones speakers.
PS: If u get rid of your TI stuff i´m all after the TI5 comps with OEM grilles but wouldn´t need the crossover.

2. Not really a problem if it didn´t come loose all the way. Just get yourself some glue for fixing spiders and everything from robotunderground or another source that recones speakers.
PS: If u get rid of your TI stuff i´m all after the TI5 comps with OEM grilles but wouldn´t need the crossover.
Music is silver, PHOENIX is GOLD
-
- Half Baked
- Posts: 3533
- Joined: Wed Dec 06, 2006 2:58 pm
- Location: TN, YEEEEEEEEEEEEEEEEEEHAW!!!!
- Contact:
I have a cock'n'balls negative battery terminal it's brand new no package though it is the ZBX 216 it has the wires come out the side instead of the back and iit uses a set screw to tighten cable not compression fitting. I would like $20 plus actual shipping let me know if you want to work something out.
Here are some pics of it.


Here are some pics of it.


Check my buyer/seller ratings http://phoenixphorum.com/gridracer-vt4548.html
I have more PG stuff than one guy ever needs.
I have more PG stuff than one guy ever needs.