Anyone seen a battery terminal with more inputs?

[Phoenixcolt]

I have a decent pair of Tsunami +/- battery terminals that have 2 1/0 inputs and 2 8 Gauge inputs, but I need one with a couple more 8 gauge inputs.

Anyone seen one that has 2 1/0 inputs and 4 8 gauge inputs?

I just had HID's retrofitted into my projectors and I am one terminal input short for my positive connections so I had to run a splitter block to a bigger wire and then to the terminal but I would rather not use the splitter. It is extra clutter.

Makes me really appreciate the old Tsunami Optima battery topper I had a few years ago, that thing was a monster...it had about 6 inputs on each side. They can still be had but I don't have an Optima any more.

[Bfowler]

the PG tmc ones (which are pretty hard to find now) had 2 x 1/0, + 1 x 8awg, + had a ring bolt on the back, so potentially, they could hold more if you put more rings in the back.

is running a cable to a d-block not an option?

[ttocs]

yea that is what I was going to recomend, the one that came with the akit had 2- 1/0 and one 4 out as well as the ring that allows you to add as many as you want. I am actually doing something similar with my HIDs I just installed and just running the 4 out into one of the old Pg fuse holders to properly fuse my low/highs and fogs. They are still on the bay for $10-14.

[Phoenixcolt]

...is running a cable to a d-block not an option?

Yeah that's what I am probably going to do but I am not too happy about it. At least that way I could do two runs of 1/0, 1 for the amp distri block, 1 for the engine bay distri block. With the space I have, it just won't be as clean as I like.

I also don't want to drill into the car in the engine bay because I might be trading in for a 2011 shortly, plus with my luck, I will probably f something up terribly drilling into the bay...the Tsunami Battery top with Optima Yellow would work great but is a 300 dollar combo I don't want to pay for right now...if I was even lucky enough to find a battery top.

[Phoenixcolt]

Double side taped the small distri block that I was using to the battery jacket so at least it isn't just floating around, I just hope it stays, then I will be all set.

[ttocs]

a screw hole or two in the engine bay is not going to effect the resale. Nothing else just do a good job, keep it neat and clean and you might add a couple bucks to the value to the right person that wants hids. Like I said check out the old blocks with the clear plastic cases, just got one myself a few weeks back for mine.

[Phoenixcolt]

What are they called again, PG TMS terminals?

Turns out I am going to be trading in for a 2011 Wrx Limited in the next few weeks and that already comes with HID's so my Tsunami terminals should be ok, but I am still curious what those PG terminals are called for future reference.

I am going to have to buy some of those crimpable oem looking terminals from walmart I think before I drop it off so I can save my terminals for the 2011.

[ttocs]

man I have two sets of them(just got the 2nd set for the 2nd battery I am adding) and can't remember for the life of me.

[Bfowler]

What are they called again, PG TMS terminals?

lol, you really werent going to scroll up and read my second post

tmc terminals

tmc.901 is the ground, tmc.902 is the positive fused one

[Phoenixcolt]

What are they called again, PG TMS terminals?

lol, you really werent going to scroll up and read my second post

tmc terminals

tmc.901 is the ground, tmc.902 is the positive fused one

Shoot man, I'm sorry, my mind is all over the place tonight...I should have scrolled up.