ms2250 help

Need help with your car stereo system? Have a technical question? Post here.
Post Reply
longboard
Posts: 452
Joined: Sun May 18, 2008 12:04 am

ms2250 help

Post by longboard »

heya folks

right i have a ms 2250 original amp and i need to get it mounted back into the heatsink

now i have 2 thin plates(black and approx 3 inches long) i believe go under the fets but is it only on the power supply side?

also the amp fets sil pads can i use just thermal paste or do they need to be isolated from the heatsink with sil pads if so anyone got a rs components link ?

thanks in advance

mike
1,al dd10,2 al 15 farad powercores,2nakamichi cd400s,1 xenon 200.4,2 xenon 1200.1,3 sets ti elite9s,2 sets ti elite 5s 1 set ti elite 6s 4 sets ti elite tweets 2 13w7 subs,9 ti rmds,3 pg show pieces 1 ms2250,2 zx350s,2 zx 200s,2 zx250s,1 zx450v2,1 475 ti
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Re: ms2250 help

Post by marko »

the outputs have the black strip on, the power supply fets have the sill pads, you need these to isolate the sink from the back f the fets otherwise it'll go boom on turn on!

just use thermal paste on the black strips :)
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
longboard
Posts: 452
Joined: Sun May 18, 2008 12:04 am

Re: ms2250 help

Post by longboard »

chears mate
1,al dd10,2 al 15 farad powercores,2nakamichi cd400s,1 xenon 200.4,2 xenon 1200.1,3 sets ti elite9s,2 sets ti elite 5s 1 set ti elite 6s 4 sets ti elite tweets 2 13w7 subs,9 ti rmds,3 pg show pieces 1 ms2250,2 zx350s,2 zx 200s,2 zx250s,1 zx450v2,1 475 ti
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Re: ms2250 help

Post by marko »

if you need any more help or advise give us a shout, I've had all 3 of mine stripped down and rebuilt so know what's what 8)
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Post Reply