Elite Sneak Peek

[MW3]

The RCAs are panel mount, never had a failure yet using this style. These are spendy but worth it.

[MW3]

Shift of gears. Here is the Elite tweeter.

Fully machined one piece aluminum housing.

[holmis]

Nice tweeter. Thats bulletproof mounting.

[kg1961]

Might i ask why have a on/off and auto button for the fan? if you get some stupid kid that shuts it off can't they damage the amp?I know these are not the average amps but you know some rich kid or in a couple of years will get one.

vs nice tweeter hope the mids and xover look just ask good

[MW3]

Might i ask why have a on/off and auto button for the fan? if you get some stupid kid that shuts it off can't they damage the amp?I know these are not the average amps but you know some rich kid or in a couple of years will get one.

vs nice tweeter hope the mids and xover look just ask good

Elite amplifiers have 13.5g per MM of heatsink mass, this is a serious amount of thermal mass. The thermal performance WITHOUT the fan surpasses Ti, Xenon and even ZPA. Adding the fan makes it impossible to thermal, so the amplifier can run full power without any thermal fold back circuitry necessary.

Full Power, Full Time.

The fan switch is result of countless phone calls and emails I received over the years asking about making modifications controlling the fans on ZX, Ti and ZPA amps. The fan running full speed is inaudible from about a foot away, but I will still have SQ nuts ask me it they can shut off the fan during competition. So this switch makes that easy to do so.

When set to auto the fan works as follows: Fan is off until heatsink temp reaches 50C. Then from 50C to 60C it variably speeds up. 60C and over the fan is running full speed.

Morgan

[kg1961]

thanks again for such a fast answer

[avalanchels]

Shift of gears. Here is the Elite tweeter.

Fully machined one piece aluminum housing.

Looks like a/d/s PX Concept tweeters! But will they sound as good....hnmmmm?

Sent from my ADR6400L using Tapatalk

[dwnrodeo]

Elite amplifiers have 13.5g per MM of heatsink mass, this is a serious amount of thermal mass. The thermal performance WITHOUT the fan surpasses Ti, Xenon and even ZPA. Adding the fan makes it impossible to thermal, so the amplifier can run full power without any thermal fold back circuitry necessary.

Full Power, Full Time.

The fan switch is result of countless phone calls and emails I received over the years asking about making modifications controlling the fans on ZX, Ti and ZPA amps. The fan running full speed is inaudible from about a foot away, but I will still have SQ nuts ask me it they can shut off the fan during competition. So this switch makes that easy to do so.

When set to auto the fan works as follows: Fan is off until heatsink temp reaches 50C. Then from 50C to 60C it variably speeds up. 60C and over the fan is running full speed.

Morgan

Great idea Morgan! I for one love my Xenon amp(s), but my biggest gripe about them is the fan is audible when the stereo is off. I don't run my stereo at loud volumes very often, so having the ability to control the fan is perfect.

[Lux]

wow! Warn a person before showing pictures like that. I am stuck at work without a spare pair of pants.

The new equipment looks awsome, cant wait

[ttocs]

ah shit I am not so sure I want to be approved for disability now as I see what I wanna spend my check on.

[Marcotah]

Gettin' excited with these news from inside the PG factory! Most of these parts seems to be part of my next project...
Can you tell us more secrets of the new TiElite Compos, Morgan? Are they projected by PG and made by another top notch factory like the Old Morel/PG Ti Elites were, or they will be definetelly made by PG?
This TiElite Tweeter housing reminds me Hybrid Audio, but the twweter itself reminds me a Seas tweet... just a thought.
Ps.: How will be the owners manuals for the TiElites compos? I really appreciate to have all parameters of the woofers, tweeters and crosses (Like Fs, Vas, Bl, Le, etc.)

[southfloridaPGlover]

iso sub pic

[bonglee0507]

Hey Morgan, i just won the 3rd place EMMA(European Mobile Media Asso) at singapore using 2 PG ti800.4! pls send those amps to the phils ASAP so that we can get more trophys!

[MW3]

Gettin' excited with these news from inside the PG factory! Most of these parts seems to be part of my next project...
Can you tell us more secrets of the new TiElite Compos, Morgan? Are they projected by PG and made by another top notch factory like the Old Morel/PG Ti Elites were, or they will be definetelly made by PG?
This TiElite Tweeter housing reminds me Hybrid Audio, but the twweter itself reminds me a Seas tweet... just a thought.
Ps.: How will be the owners manuals for the TiElites compos? I really appreciate to have all parameters of the woofers, tweeters and crosses (Like Fs, Vas, Bl, Le, etc.)

We will list the complete T/S Parameters and other tidbits in the manual for sure.

I am working on a white paper now on the engineering, sound and mechanical goals and functions. More news to follow.

[MW3]

iso sub pic

Features:
- 60mm of Peak to Peak Excursion
- Dual 4 Ohms Voice Coils
- 3.0in Premium OFC Copper Wound Voice Coils
- Dual Long Throw Spider Suspension
- Integrated Tinsel Leads
- Composite Material Woven Hybrid Cone
- High Excursion CAE/CAD Motor Design
- Vented Titanium-Aluminum Hybrid Former
- One Piece Aluminum Plated Dustcap with Tri-Blue LEDs
- High Roll Butyl Rubber Surround
- Nickel Plated 12 Gauge Speaker Terminal
- Optimized for Sealed or Vented Enclosures
- Rigid Powder Coated Anti-Resonant Castbasket

Power Handling -1600w RMS -3200w PEAK

If you want a driver with a huge motor comprised of mismatched off the shelf parts that looks really large (but only makes noise at one frequency band or needs a special enclosure) this is not the woofer for you.

However, if you want a properly designed woofer with a fully optimized and balanced motor structure that provides phenomenal transient response, ultra low frequencies and massive SPL levels effortlessly with a wide range of music/enclosures take a further look and listen.

[stipud]

What a beast

[ROBSCUSTOMSAPK]

That sub is f..in awesome. 60mm p2p. I want em. I'm wondering what kind of hybrid woven cone material?

[tvrift]

Sub seems nice, would love to see the TS specs though..

I could do without the dimples and leds though, seems sort of Audiobahnish. What do the leds do? Pulse with music?

[fuzzysnuggleduck]

I am working on a white paper now on the engineering, sound and mechanical goals and functions. More news to follow.

Badass

The old product docs/info/lit from PG that you just knew was written by the engineers was really charming and gave PG some character. I'm glad to hear there is a modern incarnation coming our way! Thanks, Morgan.

[southfloridaPGlover]

Nice

[dvnt88]

All I can say is ...WOW , that sub is pure audio eye-candy.

[audiogood]

I will take two of the subs .. Morgan and pg you have done an awsome job .. and nice touch with the blue led,s glad to see they were kept from the first ti elite subs and no its not audiobahn ish that's straight up pg

[MW3]

Merry Christmas Everyone...

I will post up some more Elite sneak peak items after the 25th...

[dvnt88]

Merry Christmas Everyone...

I will post up some more Elite sneak peak items after the 25th...

TEASE ...

[Marcotah]

Merry Christmas Everyone...

I will post up some more Elite sneak peak items after the 25th...

Are those pictures coming from Santa's bag? Just kidding...
Anxious for more pics...
Merry Christmass for everyone...