CUSTOM CRACKED m25 m44 (rt66)

Post by **mhyde71** » Sun Jul 31, 2011 11:27 am

hey thanks tom...

and heres why im kinda feelin' this amp project that was done at the behest of the costomer...as he instructed pretty much...my work, but his directive...

is that even with it broken up...it still 1) makes sense even if you were to just read the text on either of the two amps... the separated logo also works b/c pg did once use just the logo as seen on the 44 part...and i believe i recall just seeing the rca's being used independently also as well.

so it does work...now the only fuk up i just noticed...as you guys see is that up above i had different art work for the 44... look at the print outs i did for proofs... if had the text/lines like a m44 would have....and was supposed to be on the amp to follow suit with the m25.... so i just realized that and sry travis...but in the end i think/guess will be okay b/c otherwise i think it would have been too confusing there with all that and would confuse the user potentially...idk...sounds good though.

m

STROKD · Post by **STROKD** » Wed Aug 03, 2011 9:57 am

you are truly an artist... btw I pm'd u yesterday...

Nils · Post by **Nils** » Wed Aug 03, 2011 10:40 am

Well you have done it again

outstanding! Nice! Well done! And so on....

Post by **mhyde71** » Wed Aug 03, 2011 11:41 am

@stroked

Can do...you pm subject...can do yes

I have to get these chairs done for customer....been in blast booth for laat couple days...have one day left and i will get more details for you

Thx nils and stroked and errr'one else thx

STROKD · Post by **STROKD** » Wed Aug 03, 2011 12:31 pm

mhyde71 wrote:@stroked

Can do...you pm subject...can do yes

Thx nils and stroked and errr'one else thx

U can do carbon fiber look or color matched or either? Lol

Post by **ttocs** » Wed Aug 03, 2011 1:36 pm

all you need to do is use those little rubber non-skid mats(the type with the little squares) as a mask and spray through it.

Post by **mhyde71** » Wed Aug 03, 2011 2:34 pm

Can do bpth...i would clear coat w/ transparent colored powder of cf hydrographic application looks killer when finished

Post by **ttocs** » Wed Aug 03, 2011 3:35 pm

been hearing more and more about that lately. I guess all you need is the tank and the film/activator and its really easy to do.

Shinju · Post by **Shinju** » Thu Aug 04, 2011 12:01 am

nice work! if that only had black terminals that would really be the cherry on top!

I dig it! Really love the Zapco black on the M Series fins almost more then the anodized gold orignal color!

ludeboost98 · Post by **ludeboost98** » Thu Aug 04, 2011 2:40 am

Looks great ! Glad to know someone here can do powdercoating ! I have some M amps that will be needing some love . Do you think you could come up with something (just sone decals) for a zx475ti and a zx600ti to make it look like a cracked 950ti ? Mine have some surface rust and i would like to polish them out . Just an idea

Post by **mhyde71** » Thu Aug 04, 2011 8:09 am

Thinking....thinking yes...but need to toy with it a lil on puter.. and know what the dims of metal is.

Post by **mhyde71** » Tue Dec 20, 2011 12:46 pm

okay so given the 66 in on its way back to me... (and for sale in another thread)

Here is what the original idea from customer was, and in the end, what he's going with.

chk it out! looks great in person iyam

m

Nils · Post by **Nils** » Tue Dec 20, 2011 12:53 pm

Looks nice Matt

(as allways

)

Post by **mhyde71** » Fri Jan 06, 2012 7:16 pm

well... in fact... after further review... i decided to re-do...wasnt so so pleased with the crack being over to the left so much...and the finish ended up having a burned-ish yellow-ish color in the clear. so given those two reasons, i decided to run through the whole dealio once again (strip in acid, degrease, blast, prime, coat, artwork, and clear) so here we are now with just needing to clear coat...BUT i am like so so much more pleased with the crack over to the right more on the 25

have a look

Post by **kg1961** » Sat Jan 07, 2012 5:33 pm

man i love it!!!!!!!!!!!!

Post by **mhyde71** » Fri Jan 27, 2012 5:49 am

here they are together....

soon pics of them installed next to each other...

but looking real good thus far!!!!

Post by **mhyde71** » Sun Jan 29, 2012 7:27 am

and together

spaceace60 · Post by **spaceace60** » Sun Jun 10, 2012 7:20 pm

i know this is an old post but i have several m series amps m25,50,100,rt66 and would love to have some custom screening done to them! if anybody can do it plz call me(814)493-3173 thanks Jim

Post by **mhyde71** » Sun Jun 10, 2012 7:53 pm

what exactly were you thinking about? like color scheme and art wise.... oem fonts and stuff, or something different?
i can do, but can not place art on black or very dark color (sadly, i havent figured that one out yet) - however it is not screening...it is a digital transfer process in which it gets baked into the finish with a clear coat.

check my fb gallery page for khameleon koatings and you can check out many other past works (link in sig)

ill see if i cant get a call into you tomorrow at some point...but if i get distracted or forget- you are welcome to call just the same....800 516-2339

CUSTOM CRACKED m25 m44 (rt66)

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED RTE 66

Re: CUSTOM CRACKED m25 m44 (rt66)

Re: CUSTOM CRACKED m25 m44 (rt66)

Re: CUSTOM CRACKED m25 m44 (rt66)