MS Capacitor

luigi66 · Post by **luigi66** » Fri Sep 07, 2012 8:10 am

Question.
I saw that all the capacitors on the small amplifiers phoenix gold ms range are from 2,200 uF 16V 105C, I saw that you use when you need to replace capacitors, 5600 uF 16V 105C.
Ask you all how come you do not meet the factory and instead using condensers with a capacity greater uF?

Post by **Eric D** » Fri Sep 07, 2012 12:39 pm

Cosmetic reasons. If you use 2,200uF caps, they are less than half the height of the original capacitors, so they don't look very good in the amplifier (when the amplifier is to be put on display).

luigi66 · Post by **luigi66** » Fri Sep 07, 2012 1:10 pm

Eric D wrote:Cosmetic reasons. If you use 2,200uF caps, they are less than half the height of the original capacitors, so they don't look very good in the amplifier (when the amplifier is to be put on display).

I understand but I ask for greater capacitance of the capacitor 5600 uF 2200 uF vs not affect anything?
The original capacitors who produced them?
All my amps MS (MS 2125 - MS 275 - 2240 MPS - MPS 2500) there are the same from 2200 uF

zeropoint0.5 · Post by **zeropoint0.5** » Fri Sep 07, 2012 2:03 pm

Just listen to Eric, you can't go wrong.....

Audiophiliac · Post by **Audiophiliac** » Fri Sep 07, 2012 7:34 pm

More is better.

MS Capacitor

MS Capacitor

Re: MS Capacitor

Re: MS Capacitor

Re: MS Capacitor

Re: MS Capacitor