New 2013 Ti Amps

[Eric D]

Any chance we can get any photos of these new amps? Ones from CES, or even some prototype photos would be great.

I would like to learn more about what looks to be a very exciting lineup.

[Kirghiz]

They look like the Elites tbh, but if you go on PG's website and look at the Ti amplifiers, the new ones are down at the bottom with specs.

[MW3]

Eric,

I will get some internal pics up shortly.

I am also putting together a white sheet now with details on electrical designs, stay tuned.

[Eric D]

I know I have asked for this for probably 5 years now, but it sure would be sweet if the 4-channel and the 5-channel had reversed phase rear outputs (with reversed labels as well), so you can run the amps as 2-channels or 3-channels respectively (stereo bridging). Especially since few 2-channel models are available, I see this as very useful.

Also, a welcome would be the ability to run either of those amps off only a stereo pair of RCAs, instead of needing "Y" cables.

Just my 2 cents...

[Kirghiz]

Are the Ti21300.1's strappable, so you can link two together to achieve 2600 watts at 1 ohm? If I wanted to run a pair of Elite 12's off of them, that would be about the only way I can figure to do it without a dual 2 ohm Elite 12 available. I'm trying to come up with a plan B if I can't fit two Elite amps.

[Damo95]

I was told by the aus Stinger boys about the new Ti2's...

I'm very very interested in them, as they are a straight swap size wise (maybe a touch smaller!) than my current Tantrum amps.

[oldskoolmseriesfan]

I was told by the aus Stinger boys about the new Ti2's...

I'm very very interested in them, as they are a straight swap size wise (maybe a touch smaller!) than my current Tantrum amps.

Be carefull Damo those guys are crazy

[Starunit10]

Yeah, They seem awsome! In fact they are the featured product on the pg website! Check out all the great pics and make your comparison!

[Kirghiz]

I'll be curious to learn about how well those 1300.1's manage heat at 1 ohm. You can just about get 4 of them in the same space as an Elite.1, and that would be 3600 watts at 2 ohm, and 5200 watts at 1 ohm. If they could be strapped it would be epic for spl builds.

[Damo95]

Be carefull Damo those guys are crazy

I know..
I'm very good mates with all of them, and I've been assisting Scott at times with the Astra..

I should hassle scott to update the install thread.. we finally have a cracked (in many places!) windscreen..

[Starunit10]

Are these new ti2 amps being distributed in the u.s yet ? Mainly the 5 channel?

[Kirghiz]

When I asked my dealer about them a couple weeks ago, he had heard end of March, and he thought they should have been available, but I don't think he really bothered to check because we were pushing Elites in my install and the Ti2's were just plan B if the Elites didn't fit.