Stickers, Logos, and Emblems

[mvpolo2k3]

Hi all. Not sure where else to put this but if its in the wrong spot mods please move it. I have a collection of OLD PG stickers that are bad, they wont stick anymore, and I need to remake them. I have a plotter, and I have already scanned and converted the old stickers. I know I can make these for my own use, but are there limitations on making them for other people? I also have a CNC mill that I was contemplating making billet engraved end-plates and emblems for amps and for projects. Any thoughts guys? Anybody need stickers made?


Heres what an old logo off my MS2125 looks like all cleaned up. Before and after:
Before, on the end cap:



After:

[Kirghiz]

Not sure about the legality of it with PG, Morgan would have to comment, but I wouldn't mind some custom CNC speaker grills made from the new rising phoenix logo.

[mvpolo2k3]

if that was a monochrome image its totally doable. the problem with a picture like that is all the details, and the colors. I put it in my 3D software, and doing it with the relief of dimension doesnt look very good. If it was black and white I could do a simple outline engrave cut and it would look very clean!!

This is more the style I do on a daily basis:

[ttocs]

morgan wil not have an issue with it right up till the time you start mass producing them and selling them as a profit. Hell ebay is filled with copies for sale. I have a bunch of other decals if you want some scans of different designs.

[mvpolo2k3]

Im not really planning on mass producing them, but if guys want one for a back window, plexi, or install Id be glad to give them a good deal on a couple. Most of the files I have are older, and Im always looking for other variations and clean pics of all the PG logos. Im working on digitizing the end caps off my MS2125 so I can cut some sample pieces. I know there are some amps out there that are damaged or rusted from poor treatment, and a new end cap would look sweet, whether it was paint matched or polished! As far as stickers go I know ebay is full of knock-off logos. I try to keep to the custom realm. I can cut them any size that you guys would need, from 1" tall to 24" tall. Ebay cant do that

ttocs pm me with what you have, and if you want any of them turned into stickers ill hook you up!

[ttocs]

I think our resident powder coater has the end caps for a couple of amps digitized already and has a special technique to lay them out over his fresh powder and then clear over it for a nearly identical look to the stock caps. Not sure the material he uses but it doesn't stick up like vinyl does.




Whatcha want?

I also have a vinyl cutter that I need to fire up shortly for a new project. As much as I love the original look of them all I kinda would like to swap all the pink for maybe a pg blue. Never really been a pink dude, let alone hot pink and really don't think it would look right on my green/black mustang.

[mhyde71]

here is thread of the first artwork app i did back like 3-4 years ago.

since then i have learned alot and gotten pretty good with it.

http://www.phoenixphorum.com/viewtopic.php?f=3&t=15689


check sig link for more pics of artwork on amps/plates etc

m

[mvpolo2k3]

Hyde, that work looks amazing!! Im not too big into the laser printing stuff, I do mainly plotting work and CNC stuff.

[LowandLoud]

I am looking for an image of the old slogan "NO LIMITS". I want to make a windshield banner for my truck and am having trouble finding what i am looking for. Color can be changed at the print shop but want to stay traditional with the purple and yellow. Considering a "PG" centered in the background but not sure. The entire logo with the RCA and everything is way too big. If anybody has anything like this saved somewhere i would greatly appreciate a copy. Thanks

LL

[joerg]

Hope this helps

[LowandLoud]

Not sure if they can work with that but.... its the best i have atm.

Thanks Joerg

LL

[Tony_jr_LGND]

I think our resident powder coater has the end caps for a couple of amps digitized already and has a special technique to lay them out over his fresh powder and then clear over it for a nearly identical look to the stock caps. Not sure the material he uses but it doesn't stick up like vinyl does.




Whatcha want?

I also have a vinyl cutter that I need to fire up shortly for a new project. As much as I love the original look of them all I kinda would like to swap all the pink for maybe a pg blue. Never really been a pink dude, let alone hot pink and really don't think it would look right on my green/black mustang.

hey could you email me about those scans or sending a couple my way, we could work something out

[ttocs]

I could fire up the scanner. Which ones do you want?

[Tony_jr_LGND]

I could fire up the scanner. Which ones do you want?

The phoenix gold logo with the V shaped red cable and the one without ir, the pg logo and any chance you have the standard phoenix gold writing that is on the elite 11 amps and etc. Id be fine with any of these

[holmis]

I have PG logos in vector somplace on my PC...

[twisted]

I have PG logos in vector somplace on my PC...

Can I get a copy of those please?

[ttocs]

x2 I could use the one for my alternator.

[NOT 2 OLD YET]

I think our resident powder coater has the end caps for a couple of amps digitized already and has a special technique to lay them out over his fresh powder and then clear over it for a nearly identical look to the stock caps. Not sure the material he uses but it doesn't stick up like vinyl does.




Whatcha want?

I also have a vinyl cutter that I need to fire up shortly for a new project. As much as I love the original look of them all I kinda would like to swap all the pink for maybe a pg blue. Never really been a pink dude, let alone hot pink and really don't think it would look right on my green/black mustang.

I know this is an old post, but are you making these? Or do you know someone that is? I am really looking for the 1st gen with the RCA cable (The smaller one in the middle) for my truck.

[ttocs]

I am not making but thought about going to a printer to have a couple made up. These are just what I got in a collection.

[NOT 2 OLD YET]

I am not making but thought about going to a printer to have a couple made up. These are just what I got in a collection.

Let me know if you do I would like a few!

[ttocs]

I have been looking for a sign shop that has the ability to either make a metal badge for my alt or a decal that would match the original. I would like to have a few of these to be able to use and not feel bad about as well so I will ask. Probably be after Christmas but don't be afraid to remind me.

[kg1961]

what about talking with stuart he had metal pg logo made in to look carbon fiber and I got my dd10 pcs made ttoccs you know how nice they look
cost a lot but worth it imo

[Strykers_Inc]

I would really like to get some of these made up if your still making them!

[ttocs]

Not sure about the legality of it with PG, Morgan would have to comment, but I wouldn't mind some custom CNC speaker grills made from the new rising phoenix logo.

I am curious if anyone has a higher res image of the new PG flaming phoenix logo? Myself and my brother are playing around with the idea of laser etching some plexi either for example for the new amps with plexi in them or as windows to cover your gear, or even just as a wall hanger. With the right leds under it, it would not be hard to make it look like its almost on fire. Next question is how many people might be interested? price would depend on size of course but it all starts with the logo if anyone has a better version....

[dvnt88]

^^^^ sign me up if someone creates them ... would be interested in a say 12" x 24" size to finish off the sound board or just as a lit up display in the garage ...