I need to double check the speaker wiring! Left+ to Left out Left - to Left Ground
Right + to Right Ground Right - to Right out I have 3 amps open and they are all the same! Just don't understand why they are wired this way. Is this correct?
M-series ?
-
NOT 2 OLD YET
- Posts: 400
- Joined: Mon Mar 17, 2014 4:13 pm
- Location: The Windy City
M-series ?
Collection And Still Growing:
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs
-
trickyricky
- Posts: 1653
- Joined: Sun May 06, 2012 8:01 am
Re: M-series ?
Its normal....one side is inverted...DO NOT MESS WITH IT!!
The two inner terminals are signal grounded (get a dmm with continuity mode and you will get a beep from those two terminals). These two inner pins go to the same spot (Left and Right GROUND).
All (well most) amplifiers are like this...one side is inverted so they can be bridged.
The way you mentioned it is correct.
The two inner terminals are signal grounded (get a dmm with continuity mode and you will get a beep from those two terminals). These two inner pins go to the same spot (Left and Right GROUND).
All (well most) amplifiers are like this...one side is inverted so they can be bridged.
The way you mentioned it is correct.
Last edited by trickyricky on Fri May 16, 2014 12:10 pm, edited 1 time in total.
-
NOT 2 OLD YET
- Posts: 400
- Joined: Mon Mar 17, 2014 4:13 pm
- Location: The Windy City
Re: M-series ?
OK! That does help. Thanks Ricky, Just seemed a little goofy at first. On to the next one, 3 recapped so far! And the beer is going down good too! LOL!trickyricky wrote:Its normal....one side is inverted...DO NOT MESS WITH IT!!
The two inner terminals (IIRC) are signal grounded (get a dmm with continuity mode and you will get a beep from those two terminals).
All (well most) amplifiers are like this...one side is inverted so they can be bridged.
Collection And Still Growing:
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs
M-100, 50,2,44s, and 25
RT 66 #0840, Outlaw#1005, Bandit#1884, MQ430
MS2125, MS275, MS 2250 W/shroud 3MPS2500, 2 MPS2240 Custom MPS4740
EQ215, EQ215ix,EQ 230 W/TBAt, ZX600TI, 400TI, TI500.4
2 PLD1, MX2, 2 Leather Team PG Jackets
TBA (Dealer Display Empty Guts)10'XS Subs
AX204, 406 (New In Box)
Eclipse ECD413 + DSP1001 , 2 JL 8W6
Installed: PG MPS2500 and Modified By PG MQ430
ZBB34TI With ZRDT3, and RMD
Audison Bit 10
PG Elite and Sapphire 6.5 Comps
JL 13TW5 subs