I need help with a tweeter
I need help with a tweeter
I need to find a replacement Rockford Fosgate tweeter from many moons ago...
FNQ 1401 or
FNQ 2401
If you have any or know of any, please let me know. I have one that failed on me, and I don't wish to replace the whole component set unless I have no choice.
FNQ 1401 or
FNQ 2401
If you have any or know of any, please let me know. I have one that failed on me, and I don't wish to replace the whole component set unless I have no choice.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
Re: I need help with a tweeter
I don't have much experience with those comps but I can tell you that there are a few used sets on Ebay right now. This one may have the tweets your looking for but comes with mid bass drivers as well.
http://www.ebay.com/itm/A-pair-of-used- ... ch&vxp=mtr
http://www.ebay.com/itm/A-pair-of-used- ... ch&vxp=mtr
Re: I need help with a tweeter
I could not find any sets with tweeters on eBay. The set you have the link too actually have MB Quart tweeters in the photos, not Rockford ones.Bchester6 wrote:I don't have much experience with those comps but I can tell you that there are a few used sets on Ebay right now. This one may have the tweets your looking for but comes with mid bass drivers as well.
http://www.ebay.com/itm/A-pair-of-used- ... ch&vxp=mtr
I have a feeling these are going to be too rare to find.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
Re: I need help with a tweeter
have you tried the rockford fanatics page on fb?
what else can I say I am a grumpy asshole most of the time.
-
- Itchy Tomato
- Posts: 2301
- Joined: Sat Dec 23, 2006 1:15 am
- Location: TAHITI
- Contact:
Re: I need help with a tweeter
which set has them Eric?
I have a FNQ comp set .. but don't have it with me here in Tahiti .. nor do I have pics of it ..
but could have Jason look up if it's the correct set
I have a FNQ comp set .. but don't have it with me here in Tahiti .. nor do I have pics of it ..
but could have Jason look up if it's the correct set
[url=http://www.phoenixphorum.com][img]http://phoenixphorum.com/templates/Titanium/images/logo.jpg[/img][/url]
Re: I need help with a tweeter
I don't have a Facebook account.
I dug around last night looking for something unrelated and I came across 2 FNQ prototype tweeters I had. I am going to try them out and see if they will work.
I dug around last night looking for something unrelated and I came across 2 FNQ prototype tweeters I had. I am going to try them out and see if they will work.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
Re: I need help with a tweeter
Yes this may be a hard find.. hopefully the protos work out or you may have to mix it up with something that has similar characteristics. I have some old MTX Thunder Pros that are a nice soft dome in the garage if you need them. Good luck Eric.
Re: I need help with a tweeter
Eric D wrote:I don't have a Facebook account.
I dug around last night looking for something unrelated and I came across 2 FNQ prototype tweeters I had. I am going to try them out and see if they will work.
I just made a post there for you. I will let you know what turns up.
what else can I say I am a grumpy asshole most of the time.
Re: I need help with a tweeter
I have to stick with originals as they mount co-axially with the midrange on the speaker grill.
Normally I would be OK with changing them to something more modern.
Normally I would be OK with changing them to something more modern.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
-
- Itchy Tomato
- Posts: 2301
- Joined: Sat Dec 23, 2006 1:15 am
- Location: TAHITI
- Contact:
Re: I need help with a tweeter
that's the set I have ...Eric D wrote:I have to stick with originals as they mount co-axially with the midrange on the speaker grill.
Normally I would be OK with changing them to something more modern.
all I remember was that the tweeter was mounted in the middle of the grill
[url=http://www.phoenixphorum.com][img]http://phoenixphorum.com/templates/Titanium/images/logo.jpg[/img][/url]
Re: I need help with a tweeter
Here you go. Hopefully the guy will ship but the price is right.
https://offerup.com/item/detail/147745093/
https://offerup.com/item/detail/147745093/
Re: I need help with a tweeter
That is close to correct, but is the bottom of the line P series not the top of the line Q series.
Mylar domes in the P vs aluminum in the Q. Also, the Q tweeters handle more power I believe, but I don't know how, as they have the same motor structure in all three lines, P, X, and Q.
Mylar domes in the P vs aluminum in the Q. Also, the Q tweeters handle more power I believe, but I don't know how, as they have the same motor structure in all three lines, P, X, and Q.
Got "schooled" by member shawn k on May 10th, 2011...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...
No longer really "in tune" with the audio industry, and probably have not been for some time.
Hands down the forum's most ignorant member...
Don't even know what Ohm's law is...