Well after some researching here's what I found guys. I don't wanna open a can of worms but Just want to put the right info out there to all of us.
Our site only has the tibb manual for the 2 fused system and not the other 2 styles I know of. But Ive attached the 2 different manuals I have. One is from here and one is what tricky posted. But I printed both and have highlighted the diff. Scotts correct with the fuses I see what he is referring too. If you look at the tibb you will see PG refers to two different style fuses the PGU and KF styles. But also there is 4 significant other differences. Below I have listed them along with the PDF's of highlighting these differences.
1.) AGU & KF fuse styles
2.) One has RMD and other has ZRDT. Both ultimately achieve remote voltage status
3.) the ZBB series has has an extra Voltage Monitoring status that displays with the cover on
4.) the ZBB series has a single ground input for the circuit of the ZBB where the Tibb has dual ground and remote input in the same location as the ZBB
5.)the ZBB has a switch for turning off and on the led's for voltage displays
So anyways I hope this helps guys. I would really like to get manuals for all the diff block styles they did. Cause I know of at least 5 diff styles (not including the versions with diff ga in and outs) of power blocks they did.
- zbb.pdf
- (235.81 KiB) Downloaded 298 times
- Tibb.pdf
- (270.97 KiB) Downloaded 276 times
