So wheres the vids

Confusedsoul · Post by **Confusedsoul** » Fri Oct 26, 2007 2:53 pm

Of all these RSds that everyone loves and owns?

Post by **Bfowler** » Fri Oct 26, 2007 3:05 pm

...dont video camera

heres some pics of when i had a pair of 10's in there...

and another of a rsd test mule.

Post by **Bfowler** » Fri Oct 26, 2007 3:10 pm

and there one on realm of excursion:

http://www.realmofexcursion.com/videos.html

Confusedsoul · Post by **Confusedsoul** » Fri Oct 26, 2007 4:57 pm

Bfowler wrote:and there one on realm of excursion:

http://www.realmofexcursion.com/videos.html

Thats the ONLY RSd vid I've seen. Kinda disappointing for such a great budget subwoofer.

Post by **stipud** » Fri Oct 26, 2007 6:11 pm

I took a really really really low quality video of my RSD 10 playing death metal.... The camera couldn't track it or pick up the sound.

http://photo.stipud.com/d/118-2/cameracantkeepup.mpg

Confusedsoul · Post by **Confusedsoul** » Fri Oct 26, 2007 6:16 pm

thaty makes 2 vids lol

Post by **Bfowler** » Sat Oct 27, 2007 12:31 am

lol, what does the video tell you?

they can't track the sound and you already know from the specs what the excursion is

Confusedsoul · Post by **Confusedsoul** » Sat Oct 27, 2007 7:12 am

Bfowler wrote:lol, what does the video tell you?

they can't track the sound and you already know from the specs what the excursion is

I don't know, just fun to look at installs, see how well they're driven with different amounts of power, etc.

Post by **stipud** » Sat Oct 27, 2007 7:59 am

My install gives it 250 watts off the rear of my Ti500.4.

Confusedsoul · Post by **Confusedsoul** » Sat Oct 27, 2007 8:27 am

stipud wrote:My install gives it 250 watts off the rear of my Ti500.4.

Just tried modeling in unibox for the first time and with a 3.6 cu. ft. box and 2 - 12" DVC RSd's in parallel/series off 700w, I get this:

That doesn't look so good to me. Anyone do the same and see what they get?

Post by **stipud** » Sat Oct 27, 2007 8:34 am

That's 14mm one way excursion. If your program is expecting the usual peak to peak, you have to double the number... so 28mm full Xmax.

Confusedsoul · Post by **Confusedsoul** » Sat Oct 27, 2007 8:51 am

stipud wrote:That's 14mm one way excursion. If your program is expecting the usual peak to peak, you have to double the number... so 28mm full Xmax.

It says Xmax Peak, I'm not sure if it means peak xmax one way, or peak to peak. sigh.

Post by **fuzzysnuggleduck** » Sat Oct 27, 2007 8:57 am

Confusedsoul wrote:
stipud wrote:That's 14mm one way excursion. If your program is expecting the usual peak to peak, you have to double the number... so 28mm full Xmax.
It says Xmax Peak, I'm not sure if it means peak xmax one way, or peak to peak. sigh.

14mm is one way Xmax.

Confusedsoul · Post by **Confusedsoul** » Sat Oct 27, 2007 9:40 am

fuzzysnuggleduck wrote:
Confusedsoul wrote:
stipud wrote:That's 14mm one way excursion. If your program is expecting the usual peak to peak, you have to double the number... so 28mm full Xmax.
It says Xmax Peak, I'm not sure if it means peak xmax one way, or peak to peak. sigh.
14mm is one way Xmax.

No, in Unibox the box says Xmax Peak, I don't know if I should use peak to peak excusion or one way xmax. I'm assuming I should use peak to peak, but then if you model 2 with the listed box sizes that pg recommends there is no way you'll use the full potential of these subs off 500w each.

Post by **fuzzysnuggleduck** » Sat Oct 27, 2007 9:53 am

Confusedsoul wrote:
fuzzysnuggleduck wrote:
Confusedsoul wrote: It says Xmax Peak, I'm not sure if it means peak xmax one way, or peak to peak. sigh.
14mm is one way Xmax.
No, in Unibox the box says Xmax Peak, I don't know if I should use peak to peak excusion or one way xmax. I'm assuming I should use peak to peak, but then if you model 2 with the listed box sizes that pg recommends there is no way you'll use the full potential of these subs off 500w each.

Ah sorry, I get what you're asking.

From looking at screenshots of other people's Unibox graphs, it seems to me that you enter the one-way Xmax.

Confusedsoul · Post by **Confusedsoul** » Sat Oct 27, 2007 10:28 am

fuzzysnuggleduck wrote:
Confusedsoul wrote:
fuzzysnuggleduck wrote: 14mm is one way Xmax.
No, in Unibox the box says Xmax Peak, I don't know if I should use peak to peak excusion or one way xmax. I'm assuming I should use peak to peak, but then if you model 2 with the listed box sizes that pg recommends there is no way you'll use the full potential of these subs off 500w each.
Ah sorry, I get what you're asking.

From looking at screenshots of other people's Unibox graphs, it seems to me that you enter the one-way Xmax.

If you use one way xmax, then 900w in a 1.8 cu ft sealed box with 1 rsd12 would reach xmax waaay to easily. Even 500w is what i would consider overkill. So how do they hold up, somthing doesn't seem right.