Hi...
about the rsdC...
is it a huge "db" difference in spl or sq box size?
is it worth the effort build a spl box to try? +/-
/F
box matter
- Bfowler
- Briaans..... BRIAAAAANNNNNNS
- Posts: 10769
- Joined: Wed Dec 06, 2006 11:06 am
- Location: So easy, a cavewomen could do him
for sealed boxes I personally have found there to been only slight DB gains to be had in a "SPL" box and only at certain frequencies.
on the other hand...the SQ boxes in my experience have always had a fairly big effect on the subs low end extension and overall smoothness
so i guess what i'm saying is...i always go for the SQ box when i have room because the SQ benefits far outweigh the small DB gains (and only at certain frequencies at that)
for ported boxes, the DB gains might be more tempting...
on the other hand...the SQ boxes in my experience have always had a fairly big effect on the subs low end extension and overall smoothness
so i guess what i'm saying is...i always go for the SQ box when i have room because the SQ benefits far outweigh the small DB gains (and only at certain frequencies at that)
for ported boxes, the DB gains might be more tempting...
my ex-girlfriend said "its car audio or me"
i've had tougher choices at a soda machine...
i've had tougher choices at a soda machine...
On the same power a bigger box is usually louder (assuming the box offers sufficient suspension to control the woofer), since it offers less damping. With less suspension, the speaker moves more freely, so it produces more output on less power. So, if you're running at or under the RMS capability of your woofer, there is little reason to use a smaller sealed box.
The reason SPL sealed boxes are made smaller is to add more resistance to the suspension, so that you can add more power without hitting the speaker's mechanical limits. The side effect of having a smaller box is reduction of bottom end, since it is harder for the woofer to overcome the damping and hold it's extension at lower frequencies.
What you will probably notice by taking up your box space with foam, is that your bottom end is more limited. It may become muddy sounding as well, if the woofer is not strong enough to overcome the suspension at high frequencies. Sometimes too big of a box has the same effect, if the woofer's own suspension is not enough to keep it controlled.
The reason SPL sealed boxes are made smaller is to add more resistance to the suspension, so that you can add more power without hitting the speaker's mechanical limits. The side effect of having a smaller box is reduction of bottom end, since it is harder for the woofer to overcome the damping and hold it's extension at lower frequencies.
What you will probably notice by taking up your box space with foam, is that your bottom end is more limited. It may become muddy sounding as well, if the woofer is not strong enough to overcome the suspension at high frequencies. Sometimes too big of a box has the same effect, if the woofer's own suspension is not enough to keep it controlled.