what mids and Tweeter is everyone running

Post by **kg1961** » Tue Sep 02, 2008 1:49 pm

I need a set of 6.5 mid/tweeter
in the past I used MB Quart and XR jl and Alpine DD Drive
what else is out there that people like????

Audiophiliac · Post by **Audiophiliac** » Tue Sep 02, 2008 3:20 pm

I use Exile Xtecs and love them! Before that, I had ID CXS62 and they were also really good. I had some PG Xenons before and they sounded good but not much midbass.

Post by **mhyde71** » Tue Sep 02, 2008 3:22 pm

Using the ID CSX62's just like Audiophiliac ^^^ once had..
Like them, feel that I need to make some kind of lil enclosure for them to be that much better.. but love'em for what they are right now...!

Post by **fuzzysnuggleduck** » Tue Sep 02, 2008 3:41 pm

Not to be a giant whore, but I really like my PG RSd6cs component set.

Post by **smgreen20** » Tue Sep 02, 2008 5:19 pm

I use the PG Elite 6 comps active. Thought by a VERY small margin, I prefered the Dynaudios I had last year. Wished I would have went active on them first.

But I love the Elites too. Just need to get that mid in a sealed door pod.

buckster · Post by **buckster** » Tue Sep 02, 2008 6:33 pm

I am using the Morel Hybrid Ovation 6. Nice and detailed, I really like the tweeter. IMO you need to power them up, to get the mids going though.

gridracer · Post by **gridracer** » Tue Sep 02, 2008 8:52 pm

zero points

deathcloud · Post by **deathcloud** » Tue Sep 02, 2008 9:42 pm

I am running in my car rsd65cs components and love them. Even all my friends are amazed at them. I used to have infinity reference 6.5 components and these blow them away wayyy cleaner and can get loud without being harsh on the ears like my infinitys were. LOVE EM! I want to hook them up to my dads ZX500 and see what happens but my dads stingy and wont let me. My dad is going to have his boston acoustic pro60 hooked up and ill let you guys know how that sounds vs my phoenix gold rsd65cs. thats gunna be a good review cant wait.

marko · Post by **marko** » Tue Sep 02, 2008 10:07 pm

i'm using very old but still incredible sounding focal audiom 6w mid and tlr tweeter along with 7w2 midbass with all the power i can throw at 'em

i've been tempted to change them to berylliums loads of times but can't bare to remove them from my car!!

denim · Post by **denim** » Wed Sep 03, 2008 7:27 am

In my daily driver; SEAS Neo Textile tweets, Mach5Audio MLI-65's.
300ce Brabus; Orion comps (will be switched out when I can afford to do so).

Post by **stipud** » Wed Sep 03, 2008 7:34 am

You have a 300ce Brabus and you haven't posted pictures of it yet??? For shame!

I run Elite 6 components. Love em. And I think they sound better with the passive crossover too, so there

dako · Post by **dako** » Wed Sep 03, 2008 7:34 am

I've got nothing too fancy right now, just a set of Alpine Type-R 6.5 components. When I originally did my stereo, I had an overall budget of $1300 to work with. I'm pleased with these, but by no means do I plan on keeping them forever. The mids seem to lack an authoritative punch, but I do have to say the tweeters have a nice level of detail and clarity. It also helps having the db jumpers on the crossover units to fine-tune the tweeters. I'd like to eventually get a set of PG comps though to play around with.

gkitching · Post by **gkitching** » Wed Sep 03, 2008 10:14 am

I run a 3-way up front with the PG elite 9 and 5 with Morel Supremo Picalo tweeters.

shaheen · Post by **shaheen** » Wed Sep 03, 2008 12:30 pm

I have a set of Focal K3P's , also 3 way , but ran them as a 2 way back in the day , very nice sounding speaker, good midbass, but needs a solid mounting.

Also has a set of Zeropint Tweeters and a pair od DD 6.5W midbasses , which had a stunning roll off at about 3600hz, so no need for a x-over on them.

boarder124 · Post by **boarder124** » Wed Sep 03, 2008 2:38 pm

I'm running a pair of Ascendant Audio Poly 7" mids with some cheap dayton nd20 tweets. I am really liking this setup and it only cost 50shipped for the polys used and the daytons are around 11 bucks a set. They are amazing little tweeters. I have mine crossed at 4khz@24db/oct and they are really liking that. Before i had them at 3khz at 12db/oct and they were good there too, but my mids could handle that extra bit so i took some stress off of the tweets and i am happy with how it turned out. I have a set of Blaupunkt vc100s im going to exchange them out for soon, as those are a great tweet for the price, around 35shipped w/wires and a crossover. All you need is a set of mids and you have a full component set. Not to mention, there are three different types of tweeter mounts included. I broke them in on my pc setup and they are a nice sounding tweet with quite a bit of detail. Im comparing these to my reference tweets, a pair of B&G neo3's which are the most detailed tweet i think i have ever heard in a home/car system.

STROKD · Post by **STROKD** » Wed Sep 03, 2008 3:53 pm

Focal Utopias for the win!

Also run Clif Design HDs in other cars... I have like 10 component sets.

All Focal or CDT though

joyride · Post by **joyride** » Wed Sep 03, 2008 5:12 pm

elite 5's here. Im with Stipud in that the x/o is perfect.

Just be aware that you need to make a small enclosure for the mids.

denim · Post by **denim** » Thu Sep 04, 2008 6:07 am

stipud wrote:You have a 300ce Brabus and you haven't posted pictures of it yet??? For shame!

Check the rides section sir.

Post by **kg1961** » Thu Sep 04, 2008 6:13 am

I just bought a set of Focal 165 KPS 6-1/2" 2-way Component
I should be happy with that !!!
anyone have a 10w7 jl they want to sell???

what mids and Tweeter is everyone running

what mids and Tweeter is everyone running

item