dmm tuning
-
thedeal7235
- Posts: 1866
- Joined: Fri Jan 25, 2008 7:49 pm
- Location: Sanford, Florida(orlando area)
dmm tuning
I know there was a post on here to calculate, and how to with a dmm, for volts and tuning=can someone point me in the right direction?! I cant seem to find it- and some of the recent posts, talking about measuring the volts across the speaker terminals etc. has me thinking.....-thanx Christian
as she walked out the door she expressed, 'enjoy your amp addiction'
-
mhyde71
- Dr. Jekyll
- Posts: 6231
- Joined: Sun Jan 20, 2008 8:34 pm
- Location: PG FanBoy in Green Mtn Vermont
- Contact:
i'm sure there's many.. here's one...
http://phoenixphorum.com/how-to-tell-if ... hlight=dmm
http://phoenixphorum.com/how-to-tell-if ... hlight=dmm
PAST WORK/S HERE::
https://www.facebook.com/KhameleonKoatings/photos_albums
https://www.facebook.com/KhameleonKoatings/photos_albums
Christian -
http://phoenixphorum.com/problem-x200-4-vt7570-25.html... I just wrote it up for him.
You calculate the voltage by doing Power = Voltage^2/Resistance
--or--
sqrt(Power*Resistance) = Voltage
So sqrt(100*4) = 20V if you have a TI400.2 hooked up to a 4 ohm load (at 100x2).
http://phoenixphorum.com/problem-x200-4-vt7570-25.html... I just wrote it up for him.
You calculate the voltage by doing Power = Voltage^2/Resistance
--or--
sqrt(Power*Resistance) = Voltage
So sqrt(100*4) = 20V if you have a TI400.2 hooked up to a 4 ohm load (at 100x2).