Ok hello to everyone
My name is Marko Petrov from Serbia
I have registered today on this phorum,
Soo this is my problem,,,
I have bought two of Phoenix Gold RSd12d
I want to make Bass reflex ported box for my car,
I have Mercedes A160 w168 as i measured the limits for the box i can place there is X 90cm----Y 50cm----Z 42cm
1 inch is ----2.54 cm
as i calculated over the Rockford fosgate web site that is 144liter for two speaker's ~~~~ 5.1 cu.feet
And on the specification for the woofer they said it is good for ported box 1.8---3.6 cu.feet for one speaker
i think that 5.1 cu feet for 2 speaker will be fine,,,
what do you think?
and i have a problem with port's i can not decide what Fi (kind of port to use)
Should i use 2 ports x 5 inch(5x2.54= 12.7 cm )
OR one PORT of 16 cm = 6.3 inch
All 2 kind of port's are 13.8 cm long
and 75% of peoples here is saying to me to use bigger port and only one if i want to make box for db drag
So from your experience what do you say?
and how can i measure the HZ in my box
Ty so much
Ported bass reflex box for 2 rsd 12'' ???
port's are rounded and i think about two different types
1. Fi = 12cm
2. Fi = 16cm
This on the picture Fi = 12cm and he is 13.8 cm long
should i place these two or one of 16 cm ,the friends told that fo more DB it is better one of 16 cm and for better sound two of 12''
1. Fi = 12cm
2. Fi = 16cm
This on the picture Fi = 12cm and he is 13.8 cm long
should i place these two or one of 16 cm ,the friends told that fo more DB it is better one of 16 cm and for better sound two of 12''
- Attachments
-
- br70tr.jpg (10.38 KiB) Viewed 3133 times
soo this how i made it, it is only the first step i have done,, after this i know what to do,,but just cause noone has replied on my question about the port ,i made decision by my self and i will place 2 x 12 cm diameter and 13.8 cm long ports.......soo ty anyway
- Attachments
-
- box.jpg (92.15 KiB) Viewed 3065 times