MS-slave/master

Pedi · Post by **Pedi** » Sun Aug 19, 2007 2:14 am

I have never tried to use it, but are there anyone here that has?

I was told by my dealer in the 90ies that the slave/master connection was good to go etc...

Anyone with experiences here?

brenzbmr@sb · Post by **brenzbmr@sb** » Sun Aug 19, 2007 11:47 am

yeah i did, problem was it was being used wrong and that is why pg
removed it on later rev..

it simply sychronizes all the pwer supplies to one amp to prevent
noise being generated by different pulses from the multiple pwer supplies

problem was people would use a ms 250 as a master and then use
2125 as slaves..also the jacks that were used couldnt be crimped or
smashed very tempermental.....

people were blowing the pwer supplies..

MW3 · Post by **MW3** » Mon Aug 20, 2007 6:25 am

As explained, don't use it.

Pedi · Post by **Pedi** » Mon Aug 20, 2007 10:05 am

Thanks.. Now I won't...

marko · Post by **marko** » Mon Aug 20, 2007 12:42 pm

i never bothered with mine, leave well alone is my theory

brenzbmr@sb · Post by **brenzbmr@sb** » Mon Aug 20, 2007 10:48 pm

sup morgan...................

how is x doing........

i still have you and brian on our agenda...

its slowly taking off so as soon as i get some capital

i will make that investment.

aloha

chaplin · Post by **chaplin** » Thu Feb 12, 2009 9:03 pm

brenzbmr@sb wrote:yeah i did, problem was it was being used wrong and that is why pg
removed it on later rev..

it simply sychronizes all the pwer supplies to one amp to prevent
noise being generated by different pulses from the multiple pwer supplies

problem was people would use a ms 250 as a master and then use
2125 as slaves..also the jacks that were used couldnt be crimped or
smashed very tempermental.....

people were blowing the pwer supplies..

And MS250 as a master with MS275 as slave its ok?

nico boom · Post by **nico boom** » Fri Feb 13, 2009 4:00 am

...like mentioned above...DON'T.

chaplin · Post by **chaplin** » Fri Feb 13, 2009 7:12 am

nico boom wrote:...like mentioned above...DON'T.

This example is for MS250 ans MS2125... my example is for MS250 and MS275...