Let's see your stash

Stryker · Post by **Stryker** » Sun May 02, 2010 7:21 pm

I'm down for at least 5 of the pink rca stickers

. see what ya can do.
betcha a separate thread would generate a boat load more interest.

focker21 · Post by **focker21** » Sun May 02, 2010 7:24 pm

those would be sweet.. I'll be in for a handfull

gbody805 · Post by **gbody805** » Sun May 02, 2010 7:41 pm

JayGold wrote:The PG No Limits is what your referring to, correct?

Yep.

That is a inside window sticker? Graphics and adhesive on the same side?

I would be good for atleast 5 of them and maybe 5 more as regular stickers.
Regular being graphic and adhesive on opposite sides..

I would be good for 5 of the pink rca sticker as well.

You might have just opened a can of worms.

Everyone here has been looking for PG stickers. Both for collecting and for use in their installs.

JayGold · Post by **JayGold** » Sun May 02, 2010 7:59 pm

gbody805 wrote:
JayGold wrote:The PG No Limits is what your referring to, correct?
Yep.
That is a inside window sticker? Graphics and adhesive on the same side?

I would be good for atleast 5 of them and maybe 5 more as regular stickers.
Regular being graphic and adhesive on opposite sides..

I would be good for 5 of the pink rca sticker as well.

You might have just opened a can of worms.
Everyone here has been looking for PG stickers. Both for collecting and for use in their installs.

I agree with you that this could blow up, until I figure out the specifics I've taken down the pics.
Due to the undertaking of this I could have some work on my hands which will require some time.
In the next week or so I'll work out the logistics of decal design/printing/color combos/sizes/etc., collecting payment via PayPal, estimating shipping charges (some of which may be outside US), packaging (so the decals don't get creased/damaged) and thread discussion.

I'll post up a thread when I work out some of the above mentioned items which could potentially be a sticky so that all members can contribute and discuss.

Post by **ttocs** » Sun May 02, 2010 9:37 pm

I can print on vinyl and then cut them with my vinyl cutter. Not sore how long they would last, but I could do it for pretty cheap as well as customize them for colors or sizes if needed.

JayGold · Post by **JayGold** » Mon May 03, 2010 8:19 am

ttocs wrote:I can print on vinyl and then cut them with my vinyl cutter. Not sore how long they would last, but I could do it for pretty cheap as well as customize them for colors or sizes if needed.

That's the route I'd be looking to go but also consider the decal materials used to withstand heat requirements (for use on plexi amp covers), UV light (for use on vehicle windows) and/or weather depending on location used.

Post by **ttocs** » Mon May 03, 2010 10:22 am

they make high temp vinyl that would work with no problems. I know people that made decals to go on their valve covers on the motor.

Post by **joerg** » Mon May 03, 2010 10:25 am

At some point i thought that´s the "Let's see your stash" thread

dBincognito · Post by **dBincognito** » Mon May 03, 2010 10:31 am

joerg wrote:At some point i thought thatÂ´s the "Let's see your stash" thread

I keep coming in here expecting to see porn or LE amps, all these posts just keep letting me down.

JayGold · Post by **JayGold** » Sun May 09, 2010 9:14 pm

Just picked this gem up today, I'd say its a 9.5/10 cosmetically.

Planning to run the Canton RS3s with it.

Now to find a clean sub amp capable of around 300x2 @ 4ohms/ch for the (2) Kicker Solobaric's...any suggestions?

CodyWayne718 · Post by **CodyWayne718** » Sun May 09, 2010 9:42 pm

Boss and Hitron make some cheap 300.2 @ 4 ohm amps, I have never used either brand I'm jus throwin stuff out there. Have to stay up all night for night shift tomorrow

Are they L7s or L5s, prolly get a decent 600.1 at 4 ohm mono class D for a little more money. I dunno thou, sorta new to all this

JayGold · Post by **JayGold** » Sun May 09, 2010 9:55 pm

CodyWayne718 wrote:Boss and Hitron make some cheap 300.2 @ 4 ohm amps, I have never used either brand I'm jus throwin stuff out there. Have to stay up all night for night shift tomorrow Are they L7s or L5s, prolly get a decent 600.1 at 4 ohm mono class D for a little more money. I dunno thou, sorta new to all this

They are pictured on last page...the vintage S10a's
I would also consider a 2 ohm stable mono sub amp, something to compliment the PPI.

dvnt88 · Post by **dvnt88** » Tue May 11, 2010 5:20 pm

Ok ... Finally got my ZX475 today and below are my new toys to replace my current set up.

Ahsmo · Post by **Ahsmo** » Wed May 12, 2010 7:58 am

Heres my stash

waynehead · Post by **waynehead** » Wed May 12, 2010 8:30 am

Post by **kg1961** » Wed May 12, 2010 8:31 am

waynehead wrote:

x2 very funny I was waiting to see who would post it!!!

oldschoolfan · Post by **oldschoolfan** » Thu May 13, 2010 2:35 pm

Well hopefully only Ahsmo would post a picture of Ahsmo's stash.

Ahsmo · Post by **Ahsmo** » Thu May 13, 2010 3:54 pm

I just shaved that that thing off.

JK · Post by JK » Thu May 13, 2010 4:50 pm

do u still have that heat sink??? i want it if u will sell it

jbob0124 · Post by **jbob0124** » Sun May 16, 2010 10:19 am

Well, here is my stash, all of it is PG except a Hifonics Centurion and a Power Pumper 1f cap (from one of my first installs before PG

)

MSOO72 · Post by **MSOO72** » Mon May 31, 2010 10:42 pm

R-acer wrote:My updated "little" collection..... and thanks to Tristan...the Chrome 1000 jumped out of Tristans Picture and into mine

WOW!! Just how many hands has that beast passed through since i sold it a few years ago? Glad to see the whole PG community has had the joy of loving and fondling it

It's sister may be looking for a home in the near future.

Post by **joerg** » Mon May 31, 2010 10:58 pm

It's sister may be looking for a home

You got one more?

spiritofnorway · Post by **spiritofnorway** » Wed Jun 02, 2010 12:37 pm

I would also buy one if I could get one ...
I will continue searching ..

MSOO72 · Post by **MSOO72** » Wed Jun 02, 2010 3:38 pm

joerg wrote:
It's sister may be looking for a home
You got one more?

Yeah i have the sister to this one. They were ordered at the same time back in 98 and have consecutive serial #'s. The one i have left has not been touched since bought. If i decide to part with it someone has already spoken for her. If/when i decide to sell and if he's no longer interested i will let you guy's/gals know.

Anyone ever hear anything about my old Reactor #2 that went to Italy? Is the owner on here? Would love to see it if it's in an install.

JayGold · Post by **JayGold** » Sat Jun 05, 2010 9:40 am

Found these hiding under my bed: MS2250TA REV E's

Let's see your stash

Re: Let's see your stash

sinks