Page 1 of 4
Help needed (Digikey)
Posted: Wed Apr 29, 2009 2:48 pm
by joerg
So i´m ready for ordering the caps for my SOFAS right now! I need to replace them in 5 SOFAS! As i don´t have my SOFAS on me and can´t look what i need and the thing with railcaps power input caps confuses the shit out of me i´ll need help ordering them.
I want all caps to be 35mm high! I want to go with the stock value of all the caps as i don´t want to change a thing on my SOFAS and 10 to 13 years of lifespan are more than enough!
Input caps MS275:
Input caps MS2125:
Railcaps MS275:
Railcaps MS2125:
PLease provide me with the links for ordering part´s a digikey! I aprecciate any help!!!
I´ll also need the red, yellow and green leds from the MS-Amps
Posted: Wed Apr 29, 2009 2:52 pm
by oldskoolmseriesfan
Joerg, give BoBandy a shout, he probably knows
Posted: Wed Apr 29, 2009 3:04 pm
by dBincognito
If you want to stay with direct replacement....as far as specs go....they will have to come from overseas...or through Nico....Digikey does not carry them nor does Newark....I can find them, but Nico might be quicker and cheaper
Posted: Wed Apr 29, 2009 3:13 pm
by joerg
dBincognito wrote:If you want to stay with direct replacement....as far as specs go....they will have to come from overseas...or through Nico....Digikey does not carry them nor does Newark....I can find them, but Nico might be quicker and cheaper
What would u choose Randy??? Is it possible to stay at least at the 35mm thing???
Posted: Wed Apr 29, 2009 3:19 pm
by dBincognito
Posted: Wed Apr 29, 2009 3:21 pm
by joerg
Can u fill that out for me please???
Input caps MS275:
Input caps MS2125:
Railcaps MS275:
Railcaps MS2125:
Posted: Wed Apr 29, 2009 3:21 pm
by dBincognito
Nothing closer...everything else is rated for 85*
Posted: Wed Apr 29, 2009 3:22 pm
by dBincognito
I'm getting ready to place a order tomorrow
Posted: Wed Apr 29, 2009 3:23 pm
by dBincognito
The power caps are 18mm right ?
Posted: Wed Apr 29, 2009 3:23 pm
by joerg
18mmx35mm
Posted: Wed Apr 29, 2009 3:27 pm
by dBincognito
Posted: Wed Apr 29, 2009 3:28 pm
by dBincognito
Those would be my choices....and what is going in my 2125's
Posted: Wed Apr 29, 2009 3:29 pm
by joerg
Posted: Wed Apr 29, 2009 3:31 pm
by dBincognito
Yes and I posted the rail caps
Posted: Wed Apr 29, 2009 3:32 pm
by dBincognito
Are the rail caps 50v in the 275 ?
Posted: Wed Apr 29, 2009 3:35 pm
by joerg
dBincognito wrote:Are the rail caps 50v in the 275 ?
I had a couple of MS275 going thru my hands but never looked at them
Posted: Wed Apr 29, 2009 3:37 pm
by dBincognito
joerg wrote:dBincognito wrote:Are the rail caps 50v in the 275 ?
I had a couple of MS275 going thru my hands but never looked at them
I can check later...all the 275's that showed up here got carried away by freshkyrp69
Posted: Wed Apr 29, 2009 3:38 pm
by joerg
Posted: Wed Apr 29, 2009 3:43 pm
by dBincognito
Posted: Wed Apr 29, 2009 3:46 pm
by dBincognito
TOM
What is the rail cap voltage for a 275 ?
Posted: Wed Apr 29, 2009 3:47 pm
by joerg
I´m pretty sure Matt know´s too!
Posted: Wed Apr 29, 2009 3:52 pm
by dBincognito
JOERG PM!!!!!!!
Posted: Wed Apr 29, 2009 3:54 pm
by dBincognito
joerg wrote:I´m pretty sure Matt know´s too!
Well it's pretty easy...it's either 35v or 50v
Posted: Wed Apr 29, 2009 4:29 pm
by dBincognito
Posted: Wed Apr 29, 2009 4:30 pm
by stipud
I would suggest either of these input caps instead, since the Panasonics are overpriced...
http://www.digikey.com/scripts/DkSearch ... 93-1804-ND
http://www.digikey.com/scripts/DkSearch ... 93-1543-ND
Apparently the HE "sound better" than the PW
There is also this 35mm cap, but I am unsure of the quality...
http://search.digikey.com/scripts/DkSea ... 65-1949-ND
The MS275 capacitors are 35v
http://www.digikey.com/scripts/DkSearch ... e=P6669-ND