Page 1 of 1
2 sets of Ti Elite 6.5 is a TI 475 4 way enough juice??????
Posted: Tue Jul 21, 2009 7:04 pm
by james--hughes
I am powering 2 sets of TI Elite 6.5 mids and tweeters (4 Mids, 4 tweets) off of a TI 475 4 channel. Is this enough or am I way under powering them? I am really unsure if this is enough as from what I have read they are really power hungry.
Posted: Tue Jul 21, 2009 9:10 pm
by ttocs
should be enough.... A little more might help a little.
Posted: Tue Jul 21, 2009 10:04 pm
by Bfowler
you tell us? how do they sound to YOU
they certainly can take more power. and i noticed mine responded well to it (moved from a xs2300 to a xenon200.2)
but if they sound good to you why mess with it?
Posted: Wed Jul 22, 2009 4:18 am
by smgreen20
Even in the Elite manual it shows a 475Ti/500.4 pushing them t 75 watts per side. Yea they'll be fine. To see if you'll like the 75 watts, temporarily bridge the amp to 2 chs at 250 per side and run one set.
As Brian mentioned it livened his set up. You might like it better too.
Posted: Wed Jul 22, 2009 8:30 pm
by james--hughes
Ok I guess I will try it both ways and see what happens. I am going to sound deaden the doors this weekend and close up all the holes. That will hopefully wake the speakers up too. Finding the mid bass is horrible right now.
Posted: Wed Jul 22, 2009 9:15 pm
by ttocs
put a complete layer of damping between the door and the door panel if you can and you will notice a big difference......
Posted: Thu Jul 23, 2009 12:33 am
by Bfowler
the sound deadening WILL make a substantial difference!