Phoenix Gold Phorum

Posted: **Sun Sep 06, 2009 6:25 pm**

Bought this one from VIN! Can´t wait to modify it

Posted: **Sun Sep 06, 2009 6:28 pm**

Right on Joerg! Could I get you to send all the measurements of that shroud to me in a pm???? I want to see if a friend of mine can duplicate it... well I know he can, I just want to see the cost for him to do it. Thanks in advance.

Posted: **Sun Sep 06, 2009 6:30 pm**

Misfire wrote:Right on Joerg! Could I get you to send all the measurements of that shroud to me in a pm???? I want to see if a friend of mine can duplicate it... well I know he can, I just want to see the cost for him to do it. Thanks in advance.

Will do so!

if u sell me two Xmax´s

Posted: **Sun Sep 06, 2009 7:39 pm**

Damn, USPS got it there quick!

Modify? ouch, its in pristine condition

Posted: **Sun Sep 06, 2009 8:44 pm**

Gonna be such a shame to cut up 2 shrouds

Sure there's no-one who can reproduce the same thing for you in an MS1000 length ????

Posted: **Sun Sep 06, 2009 9:04 pm**

I have a guy next door that can do that.

Posted: **Sun Sep 06, 2009 9:08 pm**

Jason could program his CNC to cut it out and I'm sure he could make a break/jig to bend it. He DID make his own amp didn't he........

Your welcome.

Posted: **Sun Sep 06, 2009 9:55 pm**

will you have any spare pieces left over from the conversion? i need the piece that holds the 3 fans...

Posted: **Mon Sep 07, 2009 1:35 am**

marko wrote:will you have any spare pieces left over from the conversion? i need the piece that holds the 3 fans...

I will make an exact repro of the piece and ship it to your address marko if u want too! It´s just a straight piece of metal with 3 holes in it.

I know that Jason can make one but by the time it is finished it would cost me a ton of money! And most important: I want to do it on my own

Posted: **Mon Sep 07, 2009 6:30 am**

FuzzyHoNutz wrote:

He DID make his own amp didn't he........ Your welcome.

you call that an amp

?

It has more power then some 3rd world houses

....

Posted: **Mon Sep 07, 2009 7:31 am**

joerg wrote:
marko wrote:will you have any spare pieces left over from the conversion? i need the piece that holds the 3 fans...
I will make an exact repro of the piece and ship it to your address marko if u want too! It´s just a straight piece of metal with 3 holes in it.

the only problem i would have making one is cutting the 3 holes nice and neat!

i'm also missing one deuz fastener if any are going spare

Posted: **Mon Sep 07, 2009 7:50 am**

marko wrote:
joerg wrote:
marko wrote:will you have any spare pieces left over from the conversion? i need the piece that holds the 3 fans...
I will make an exact repro of the piece and ship it to your address marko if u want too! It´s just a straight piece of metal with 3 holes in it.
the only problem i would have making one is cutting the 3 holes nice and neat! i'm also missing one deuz fastener if any are going spare

I´ve got a friend that has a machine shop that just watercuts all the stuff i need!
If u are talking about the weird looking fasteners in there i have to dissapoint u right away. I´ll need all 4 of them.

Posted: **Mon Sep 07, 2009 8:00 am**

tools on my wish list :-

water jet machine
cnc machine
powder coating kit
tig welder

please santa clause, i'll be a good boy

Posted: **Mon Sep 07, 2009 9:04 am**

marko demon tweeks do the duez fasteners
http://www.demon-tweeks.co.uk/products/ ... R/PEHF5-40

Posted: **Mon Sep 07, 2009 9:54 am**

what fastners? i have some joerg... in my box of goodies. Not sure if 4 or not, but have some i know of... i can check... but they do not look like that link that longboard provided... dont think so anyways, but close.

Posted: **Mon Sep 07, 2009 10:05 am**

mhyde71 wrote:what fastners? i have some joerg... in my box of goodies. Not sure if 4 or not, but have some i know of... i can check... but they do not look like that link that longboard provided... dont think so anyways, but close.

I don´t need those Matt. Marko needs them! I just need my stripped sink my franked TIDD10´s, two franked enplates without the holes for the master/slave jacks, the screws u ordered for me aaaaaaaaand the FAS shipped. But that´s about it

Posted: **Mon Sep 07, 2009 10:21 am**

joerg wrote:I just need my stripped sink my franked TIDD10´s, two franked enplates without the holes for the master/slave jacks, the screws u ordered for me aaaaaaaaand the FAS shipped. But that´s about it

That's alot of needing, hehe...

It is good that the 063 is at your door in the very few next days...

Posted: **Mon Sep 07, 2009 10:26 am**

Pedi wrote:
joerg wrote:I just need my stripped sink my franked TIDD10´s, two franked enplates without the holes for the master/slave jacks, the screws u ordered for me aaaaaaaaand the FAS shipped. But that´s about it
That's alot of needing, hehe...

It is good that the 063 is at your door in the very few next days...

If i could read your language i could do the tracking on my own but the heck i don´t even have a clue what it could mean

Posted: **Mon Sep 07, 2009 10:30 am**

You can use that tracking number at your local tracker:

http://www.post.at/en/2.htm

this is the message they write here:

Sendung zugestellt 8565 07.09.2009 15:00:00

Good news, ey??

Posted: **Mon Sep 07, 2009 10:31 am**

what two franked end plates 2125's right? i only have the 275's i think.

BUT could make any plate franked, pretty quickly too, but not sure how quick to get the SS done.

Posted: **Mon Sep 07, 2009 10:32 am**

And BTW...

What about this line?

Sendung zollfrei abgefertigt 1005 04.09.2009 08:18:11

Hehe, even better news,

Posted: **Mon Sep 07, 2009 10:32 am**

Pedi wrote:You can use that tracking number at your local tracker:

http://www.post.at/en/2.htm

this is the message they write here:

Sendung zugestellt 8565 07.09.2009 15:00:00

Good news, ey??

I caaaaaaaaaaaaaaaaaaaaan´t wait to get home!

Posted: **Mon Sep 07, 2009 10:38 am**

Hi Joerg
So what do you do....

Posted: **Mon Sep 07, 2009 11:34 am**

Pretty much the same thing except mine wont have the ugly white stripe in the middle!

Just kidding! Very nice work there spirit!

Posted: **Mon Sep 07, 2009 11:37 am**

Is not mine

Phoenix Gold Phorum

My newest item

My newest item