Page 1 of 1
RSDC124 or RSDC122?
Posted: Fri Oct 09, 2009 3:39 am
by wolfseed
Hi guys,
I'm going to upgrade or basically change my subwoofer system. Planning to get a RSD1200.1 and match with 2 x RSDC12. Choosing from RSDC122 or RSDC124. How does it affect the bass from a pair of 2ohm woofer and a pair of 4 ohm woofer? Which is the best i should go with?
Thanks.
Posted: Fri Oct 09, 2009 5:52 am
by phonixx
You must buy the 2 ohm version RSDC122 to get a total of 2 ohm for your RSD1200.1 You connect the coils on each woofer in serial then each woofer is 4ohm, then you connect the 2 woofers in paralell and you have a total of 2 ohm and you get max output from your 1200.1
Good luck
Posted: Fri Oct 09, 2009 9:24 am
by wolfseed
tks for the guide. ^^
Posted: Fri Oct 09, 2009 3:32 pm
by todd217
if he buys the rsdc122 he can only have 1 or 4 ohms with a single sub.
Posted: Fri Oct 09, 2009 3:46 pm
by deathcloud
todd217 wrote:if he buys the rsdc122 he can only have 1 or 4 ohms with a single sub.
Yea but the OP said he was going to have 2 RSDC subs. So he is right. If you want 2 ohms then you have to get 2 of the RSDC122 subs and then wire it series/parallel.
Here is a good website to help.
It is the middle one for what you would do.
http://www.the12volt.com/caraudio/woofe ... p~Q~2~I~22
Posted: Sat Oct 10, 2009 7:39 am
by wolfseed
yup to get the max out of 1200.1 i should run 2 x rsdc122 (2ohm)
