Will this work

Need help with your car stereo system? Have a technical question? Post here.
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Will this work

Post by Habz »

I've got these old school speakers, will it work will i need anything else, so heres the list:

Celestion Subwoofer -
Rockford Fosgate- Puch 40i (DSM) Amplifier
Component Speaker (Rockford Fosgate PWR - 54 Punch)
Kicker Shelf Speakers

Will i need another Amp ? Ive got Rockford Fosgate Wiring, Just one the look for a decent Head Unit, anyone got one up to £50 let me know.

Comments and Advice please, Look at pictures too.
Attachments
2.JPG
2.JPG (43.79 KiB) Viewed 8979 times
3.JPG
3.JPG (47.36 KiB) Viewed 8979 times
4.JPG
4.JPG (50.51 KiB) Viewed 8979 times
5.jpg
5.jpg (44.14 KiB) Viewed 8979 times
6.JPG
6.JPG (44.48 KiB) Viewed 8979 times
7.JPG
7.JPG (32.82 KiB) Viewed 8979 times
8.JPG
8.JPG (34.99 KiB) Viewed 8979 times
Last edited by Habz on Mon Jan 25, 2010 2:32 am, edited 2 times in total.
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

one of your mids looks very poorly :( idealy you would need a 2nd amp unless you were going fully passive.. whatr about tweeters to go with punch mids?
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

what do you mean fully passive?
Last edited by Habz on Sun Jan 24, 2010 10:53 am, edited 1 time in total.
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

Habz wrote:what do you mean fully passiv?
well you have a 2 channel amp that can run front end and sub simultaneously but in order to do this you need a coil on the sub and caps for mids.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

got the coil for the sub, so do you think two amps will be better because i do have another amp. i dont intend on puttin tweeters.

Do you think the celestion sub is still good ?
User avatar
marko
Posts: 2356
Joined: Sat Dec 23, 2006 11:30 am
Location: England

Post by marko »

yeah the sub is still a highly regarded piece of kit.
Ti1 headunit (unique)
Outlaw in crate.
2x original shrouded ms2250's.
Route 66 in box + custom m100 to match.
Roadster 66 in flight case
Octane LE in box.
Reactor #186 in flight case.
Reactor EQ232
Ti400.2 AL
AX204A + EQ232 + ZPX2 + TBA set
ZCS6 component set
Tantrum+Titanium bass cubes
Ti12d Elite sub
DD5 + DD10 + 6 Ti blocks!
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

isnt there a website for celestion anymore ? or isit out lol?
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

isnt there a website for celestion anymore ? or isit out lol?
gridracer
RIP
Posts: 1853
Joined: Wed Dec 20, 2006 7:19 pm

Post by gridracer »

So if you're not running tweeters what are you gonna do for highs?
Check my buyer/seller ratings http://phoenixphorum.com/gridracer-vt4548.html

I have more PG stuff than one guy ever needs.
User avatar
Tiger
Posts: 460
Joined: Wed Dec 23, 2009 7:26 am

Post by Tiger »

My thought exactly! No high frequency speakers? I mean, sure.. I love my bass.. but hey.. bring on vocals and ither sounds...

I can't locate a website for you, but specs for your Celestion sub (providing it's an AD12) are:

Vas [Liters] 140,8
Qts 0,13
Qes 0,13
Qms 6,9
Fs [Hz] 29
Sensitivity [dB] 95
Max Power [W] 300
xmax [mm] 3,2258

From these specs, all you need is the Fs, Vas, and Qts and you can use a program like WinISD to design your subwoofer enclosure to provide you with the optimum sound from your sub.

Ideally, if you can get your hands on a monoblock for you sub, then that amp will run your mids, no sweat. Ditch the 6x9s if you're going to be running a sub in your car. Me personally, I'm not a fan of running 6x9s AND a sub in the same area (unless you intend on using your 6x9s in the front and your mids in the back for rear fill... then you could get away with)
-1998 Mazda 929 HC Series 1-
[b]Alpine[/b]- CDA-7998R/CHA-S634/
PXA-H700/MRV-1507 x 3/MRV-F407 x 3
[b]Phoenix Gold[/b]- Xmax 12 x 2/ZPM160 x 4
ZPM100 x 2/ZPT25 x 2/Bass CUBE/DD5
User avatar
Pillow
Posts: 736
Joined: Sat Nov 07, 2009 11:04 am
Location: Warrenton VA

Post by Pillow »

Did someone say Punch 40 DSM fully passive?

Wow, how timely:
http://www.youtube.com/watch?v=XIpwPEfV7ns
2003 Saab 9-3 Vector: Faital, Dayton, JBL,+ DIY mixed up mess
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
ttocs
the Floor Sweeping Hack with Golden Ears
Posts: 14785
Joined: Fri Dec 19, 2008 9:53 pm

Post by ttocs »

wow
User avatar
Tiger
Posts: 460
Joined: Wed Dec 23, 2009 7:26 am

Post by Tiger »

Yeah, tough little amps, these. andy600r is selling an old RF amp around the same time as this one...

there you go habs.... something to think about... another RF amp to match this one ;)
-1998 Mazda 929 HC Series 1-
[b]Alpine[/b]- CDA-7998R/CHA-S634/
PXA-H700/MRV-1507 x 3/MRV-F407 x 3
[b]Phoenix Gold[/b]- Xmax 12 x 2/ZPM160 x 4
ZPM100 x 2/ZPT25 x 2/Bass CUBE/DD5
User avatar
Misfire
Posts: 1170
Joined: Thu May 14, 2009 12:35 pm
Location: Oregon

Post by Misfire »

Is the surround on one of your 54's ruined? It looks strange in the photo.
MS275, MS2250ta, MS2125TA, Bandit, M44, ZX200, EQ215, EQ230, TX2, PDL1, TBAT Trans+Recvr w/cable
itchnertamatoa
Itchy Tomato
Posts: 2299
Joined: Sat Dec 23, 2006 1:15 am
Location: TAHITI
Contact:

Post by itchnertamatoa »

it does look a bit ruined, or pressed in in a few spots
I'd go with a second amp and some tweets up front otherwise it will sound a bit muddy
[url=http://www.phoenixphorum.com][img]http://phoenixphorum.com/templates/Titanium/images/logo.jpg[/img][/url]
User avatar
andy600rr
Posts: 551
Joined: Wed Aug 22, 2007 7:39 pm
Location: The land of OZ

Post by andy600rr »

Tiger wrote:Yeah, tough little amps, these. andy600r is selling an old RF amp around the same time as this one...

there you go habs.... something to think about... another RF amp to match this one ;)
Ohh.... I've got an ebay stalker :lol:
M25 x 2, M50, M44, M100, Original MS 275, MS2125 & MS2250 (with shroud), XMax 15, White EQ215X, EQ232, PLD1,BLT, MX3, AX-406A, Basscubes, + Soundstream, Earthquake, RF, Boston, OZ Audio & KEF
User avatar
Tiger
Posts: 460
Joined: Wed Dec 23, 2009 7:26 am

Post by Tiger »

HAHAHAHAHA!

Dunno what you're talking about, dude!!! :whistle: hehehe
I discovered the amp amongst my ebay travels.. as you do ... :p
-1998 Mazda 929 HC Series 1-
[b]Alpine[/b]- CDA-7998R/CHA-S634/
PXA-H700/MRV-1507 x 3/MRV-F407 x 3
[b]Phoenix Gold[/b]- Xmax 12 x 2/ZPM160 x 4
ZPM100 x 2/ZPT25 x 2/Bass CUBE/DD5
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

YEAH I MIGHT GET ANOTHER RF AMP, AND IVE GOT PIONEER TWEETS, SO MIGHT, AS TIGER SAID DASH THE 6X9S HAVE THE DOOR SPEARKERS, TWWETS AND SUB WITH THE TWO AMPS!
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

Tiger wrote:My thought exactly! No high frequency speakers? I mean, sure.. I love my bass.. but hey.. bring on vocals and ither sounds...

I can't locate a website for you, but specs for your Celestion sub (providing it's an AD12) are:

Vas [Liters] 140,8
Qts 0,13
Qes 0,13
Qms 6,9
Fs [Hz] 29
Sensitivity [dB] 95
Max Power [W] 300
xmax [mm] 3,2258

From these specs, all you need is the Fs, Vas, and Qts and you can use a program like WinISD to design your subwoofer enclosure to provide you with the optimum sound from your sub.

Ideally, if you can get your hands on a monoblock for you sub, then that amp will run your mids, no sweat. Ditch the 6x9s if you're going to be running a sub in your car. Me personally, I'm not a fan of running 6x9s AND a sub in the same area (unless you intend on using your 6x9s in the front and your mids in the back for rear fill... then you could get away with)
aLRIGHT THEN MATE TWEETERS ARE ON MY LIST IL TAKE SOME PICS LATER ON TONIGHT.
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

Misfire wrote:Is the surround on one of your 54's ruined? It looks strange in the photo.
No mate they have been sitting in the cold for the last 12 years :shock: but i have tested them still sound nice! the spec on these are awsome i think 120WRMS
User avatar
Tiger
Posts: 460
Joined: Wed Dec 23, 2009 7:26 am

Post by Tiger »

Nice :) Love your work, dude!
-1998 Mazda 929 HC Series 1-
[b]Alpine[/b]- CDA-7998R/CHA-S634/
PXA-H700/MRV-1507 x 3/MRV-F407 x 3
[b]Phoenix Gold[/b]- Xmax 12 x 2/ZPM160 x 4
ZPM100 x 2/ZPT25 x 2/Bass CUBE/DD5
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

Does anyone know if the door speakers will fit a 2001 Vauxhall Corsa?
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

the amp is not the same one as mine in the youtube video mine is an 40I but still them amps were the shiz nit back in the days, and still are better than whats out today
User avatar
Pillow
Posts: 736
Joined: Sat Nov 07, 2009 11:04 am
Location: Warrenton VA

Post by Pillow »

Correct, I think the "I" incorporates the integrated crossover card.
2003 Saab 9-3 Vector: Faital, Dayton, JBL,+ DIY mixed up mess
1979 Porsche SC: Kenwood X-994, X100.2, RSd6.5cs
1971 Chevy C-10: wind noise
Habz
Posts: 21
Joined: Sun Jan 24, 2010 7:16 am

Post by Habz »

Pillow wrote:Correct, I think the "I" incorporates the integrated crossover card.
Guess what people ive Found a 60i too omg my dads kept his kit well lol, il get pics up later, and i'l tell you about the other Amps i have also!
Post Reply