MS series guys !

[SLICK]

Ok , here is the scoop .

There is a member here that approached me Via PM about getting something going on remaking the MS connections , and he sent me 2 for visuals .

Would there be a big interest for them ?

As I plan on meeting with my source monday so he can write the CNC program , and what not .

The only noticeable difference will be the mounting " ears " as we want to beef them up a 1/4 inch or so .

Keep in mind these will be cheaper the first run . And I would like to get some input on it ......


Here is the questions I have currently .

see image below , It looks to be symmetrical to me . if not can someone post a pic of one of each mounted ( need pics of the inside of the case for clearance )

[GX3]

I know I need 4 speaker terminals, 2 power and a few of each for the hell of it

[SLICK]

I should have some ballpark prices per piece tomorrow ....

[oldskoolmseriesfan]

I would asume ther would be a big interest as these are hard to find. Lets get this done... and kudos to slick and his side kicks

[SLICK]

Met with my guy today .

Will be a couple days till I get anything nailed down .

The snow is forcing me to work alot more ......

[nico boom]

Eric D. is also working on the remake of these parts.

[bogart]

who ever does it...I will be on board for full sets of power and speaker terminals for an ms250 and an ms2125.....if it isn't to much cash....

[bogart]

If your builder needs end plates for templates I have extras for 275's, 250's and for 2125's....both ta and os.....I would need them back but know it is an option

[SLICK]

Finally a small update .

The cnc program is written for the speaker terminal ......

WOOT WOOT ....

[GX3]