Reconfigure existing system
Posted: Mon Apr 16, 2007 4:08 pm
Was a member of the original forum but just found this one a couple of days ago.
Have an '02 GMC Envoy, (3) ZPA 0.5s, ZPX2 3-way crossover, PLD1, Tantrum PowerGrid, Xenon 200.4, Tantrum 400.4, and TI12d Elite Subwoofer. That is all the PG gear I have already.
Set-up I have right now is Diamond Audio S600s (midrange and crossovers only blew out the tweeters) and a pair of Ample Audio tweets for front components and a pair of Power Acoustik 6.5 coaxial for the rears running off of the Xenon 200.4. Then I only have one ZPA 0.5 running my TI12d Elite sub.
In the next coupld of months I am going to add one or maybe two Optima YellowTop batteries in the back on my SUV and put a second ZPA 0.5 on the TI12d Elite (one for each voicecoil) to put about 2000WRMS into it.
I originally wanted to get the TI Elite Components but they are hard to find.
So need some suggestions on components. (These are the ones I came up with)
1.)
I was thinking about the Focal 270V3, Polyglass V2 3-way components with a 1" tweet, 5.25" midrange and an 11" woofer; its 94db efficient and handles 150WRMS. Probably put some Focal Access Coax in the rear.
2.)
I was thinking about getting the QLogic kickpanels and putting in two sets of matching 6" Component speakers ( for a total of 4 midranges and 4 tweets in the front). And same brand coax in the rear.
3.)
Wait and see if PG comes out with a new titanium line in the future
Anyone have some good suggestions to go with my gear.
Thanks
Have an '02 GMC Envoy, (3) ZPA 0.5s, ZPX2 3-way crossover, PLD1, Tantrum PowerGrid, Xenon 200.4, Tantrum 400.4, and TI12d Elite Subwoofer. That is all the PG gear I have already.
Set-up I have right now is Diamond Audio S600s (midrange and crossovers only blew out the tweeters) and a pair of Ample Audio tweets for front components and a pair of Power Acoustik 6.5 coaxial for the rears running off of the Xenon 200.4. Then I only have one ZPA 0.5 running my TI12d Elite sub.
In the next coupld of months I am going to add one or maybe two Optima YellowTop batteries in the back on my SUV and put a second ZPA 0.5 on the TI12d Elite (one for each voicecoil) to put about 2000WRMS into it.
I originally wanted to get the TI Elite Components but they are hard to find.
So need some suggestions on components. (These are the ones I came up with)
1.)
I was thinking about the Focal 270V3, Polyglass V2 3-way components with a 1" tweet, 5.25" midrange and an 11" woofer; its 94db efficient and handles 150WRMS. Probably put some Focal Access Coax in the rear.
2.)
I was thinking about getting the QLogic kickpanels and putting in two sets of matching 6" Component speakers ( for a total of 4 midranges and 4 tweets in the front). And same brand coax in the rear.
3.)
Wait and see if PG comes out with a new titanium line in the future
Anyone have some good suggestions to go with my gear.
Thanks