Page 1 of 1
relay ?
Posted: Sun May 23, 2010 6:51 am
by twisted
ok guys......since its been 15yrs since i've had to wire a realy can somebody give me a pin diagram to wire a 5 pin relay to run power to my fans with a remote turn on?
the relays i have dont have the diagrams on the back.
thanks in advance
Posted: Sun May 23, 2010 7:34 am
by Pedi
30: B+ Power
85: Earth/ground
86: Remote power in
87: Power out...
Posted: Sun May 23, 2010 8:01 am
by ttocs
be sure to insulate terminal 87a, or wire it to a switched power source or that terminal will be live when the relay is not energized.
Posted: Sun May 23, 2010 10:35 am
by twisted
thanks gents
Posted: Sun May 23, 2010 11:48 am
by brenzbmr@sb
or put the output on 30 and the 12volts on 87a then u dont have to worry about insulating anything
i usually use 30 as the output.
Posted: Sun May 23, 2010 1:57 pm
by ttocs
me too, threw me off for a sec....
Posted: Sun May 23, 2010 2:09 pm
by Pedi
And I don't...
But I have mostly worked with European cars for a living...
Buuut.. I worked with Chrysler for 3 years (from 1995 to 1998), and if I recall right, Chrysler (read: new cars) used 30 as B+ and etc. aswell....