Phoenix Gold Phorum

I'd quite like to swap the blue LEDs for red ones. Because everything else in the car is red or white.

Any ideas how they're powered? Is it straight from 12V, i.e. I can just replace them and add an extra resistor (probably another 300Ohm or so) to drop from 3V to 1.8....

thx

Bret

What QX model?

350.2, 300.1, 100.2

Bret

I´m pretty sure there is an resistor up front those leds right now. I swapped the blue ones from a MS2250TA with red ones and changed nothing else. All four working just fine.