Phoenix Gold Phorum

any chance of calling morel and seeing if you can bring back the Ti9's?

they seem to be a HUGE hit now more than ever....

Alot more car doors would LOVE to have these....

alreayd planning on gettnig some new door panels for my stang soe I can fit them

i wouldn't expect to see rebadged morel's again. from my understand the orginal reason for using morel's was the pg lacked speaker manufacuring facilites on site and reached an agreement to partner up on a project

damn..

Shoot I'd take 8" Ti's...

jbob0124 wrote:Shoot I'd take 8" Ti's...

much more likely

I would also like to see some pg 8" with dvc

If PG came out with new (and decent) 8" I would definitely buy 2...

I'd like to see a slim 7.5" mid.....that get's down and dirty....
It would fit into almost any door without too much trouble...

And put a 3-way passive crossover in the box aswell. Make it simple.... Inside the xover, add a switch to depict what size the other driver is and maybe use R-Net chips aswell.........

jbob0124 wrote:If PG came out with new (and decent) 8" I would definitely buy 2...

I might buy 4

ttocs wrote:

jbob0124 wrote:If PG came out with new (and decent) 8" I would definitely buy 2...

I might buy 4

Hmmm...
In my early days I made a sealed box with 8psc of 8" xs subs...Driven by a ZPA 0.5 that was awesome !

I am running a sealed box with 4 mb quart 8s currently in my mustang. Not too shabby...

I would like some 8's..........but I'd much rather see a nasty 12.....and I do mean nasty.....make the Ti Elite look like a funky pup kinda nasty.

Something like this, with a PG logo

https://www.madisound.com/store/product ... ts_id=8440

I installed 9ms in my car and didn't care for them at all. More of a novelty item. But here are some that look very similar.

2 cu ft box for a 9"? 8 ohm?

ttocs wrote:2 cu ft box for a 9"? 8 ohm?

for an F3 of 43hz.

ttocs wrote:

jbob0124 wrote:If PG came out with new (and decent) 8" I would definitely buy 2...

I might buy 4

Sign me up for 1 please

dBincognito wrote:I would like some 8's..........but I'd much rather see a nasty 12.....and I do mean nasty.....make the Ti Elite look like a funky pup kinda nasty.

Something like this, with a PG logo

is that the famous funky pup?!?

howabout an add on 9" with passive crossover for the ti and r series comps?

that would be ncie

I need some 8s!!! Woofers that are rediculous in that 60-500 Hz range.

Pillow wrote:I need some 8s!!! Woofers that are rediculous in that 60-500 Hz range.

would love to know what you come up with. im sure there are plenty of options but i would like a concensus from you people.

Right now the best bet is some NOS Adire Koda 8"s with XBL tech. We will see though.

There is also some NOS Image Dynamics 8" prototypes listed on CACO that have promise.

Then again Morel, Dyn, and Dayton all have very reputable 8"s as well. But they are intended to play higher for a 2 way. The ID and Kodas are more for a dedicated woofer.

i have a set not used at all ,brandnew in the box

I will have a set that is new as well, until I put them to work in a few weeks