Phoenix Gold Phorum

I`m looking for vector graphix of:

- "Team Phoenix Gold Member" logo - OK, have it
- "Frank Amp`n Stein" Logo
- "route 66" logo - OK, have it
- "bandit" emblem - OK, have it

Good image of them, taken straight on is also an option....

Hope anyone has some of this i vectorised format...
eps, ai , svg or PDF-print

If you have some of it please mail me on: asle at multi2net dot com

//Asle

and if you get any of that- I would like too just the same.

I might be able to help some. I have this team PG logo, and might be able to help with the others. I can look into it more tomorrow. Let me know about the Team PG logo and I can edit/convert it. I should be able to get you the FAS as well. Have to look into getting the others.

like the member - DELFTENAAR mod- thats cool.


so you have it in vector format???? where colors can be separated for output???

jbob0124 wrote:I might be able to help some. I have this team PG logo, and might be able to help with the others. I can look into it more tomorrow. Let me know about the Team PG logo and I can edit/convert it. I should be able to get you the FAS as well. Have to look into getting the others.

Hi .
If you got this in true-vector it would be great !

Mail: asle at multi2net dot com

mhyde71 wrote:like the member - DELFTENAAR mod- thats cool.


so you have it in vector format???? where colors can be separated for output???

I can edit that out so it just says Member. As far as the vector, I saved it as .eps, but im not 100% sure if it will work or not, haven't messed with vector before.

holmis wrote:

jbob0124 wrote:I might be able to help some. I have this team PG logo, and might be able to help with the others. I can look into it more tomorrow. Let me know about the Team PG logo and I can edit/convert it. I should be able to get you the FAS as well. Have to look into getting the others.

Hi .
If you got this in true-vector it would be great !

Mail: asle at multi2net dot com

You've got mail, just let me know if that works or not and we can go from their.

Well, I tried messing around with AI to get the logo in the correct format, but I can't seem to figure it out. I can stick to what I do know, and clean up that logo and let someone who knows more about it work on converting/creating it.

Well, I do know Illustrator a bit....
So I think Ill do It myself.
Her is the team logo that I`m working on (Not finnished yet...) Some finetuning left & adding "Team".

Added a pic af actual drawing in Illustrator, as all is done by lines...

Here is one I was working on if your interested.

Then the "Team Phoenix Gold Member" logo is ready.

Its drawn in big size ( 3meter) to be sure of quality.. all done in Illustrator4.

Now I need a GOOD picture of the amp n`stein logo. Any who has a high res pict of it?

Result:

......aaaaand I am curious what you are up to with all theese logos...

Are you planning to do an oldschool setup with MS/amps? If so, you are not alone in Norway, hehe...

Pedi wrote:......aaaaand I am curious what you are up to with all theese logos...

Are you planning to do an oldschool setup with MS/amps? If so, you are not alone in Norway, hehe...

And I too am curious. I have at least the Team member and the frank plexi logo already in vector format. Not to be rude, but it took hours of work, and I am leery about handing them out to a new member just to see cut vinyl or reproduction screens showing up on ebay...

Most of my vector stuff I have done has been drawn to work well w/ my CNC machine. It will not work for screens and vinyl w/o some tweaking but it is a good base to start from. I have literally dozens of PG things and a few other manufacturers in some vector form or another. I have weeks of time invested in these though, so I don't want to just post them up for anyone on the interweb to get a hold of...

Anyhow, tell us what you are up too, and we might be able to help.

Later,
Jason

Well, I do not know Holmis - but I do not think that too many Norwegians see that much $$ in reproducing cheap logos for sale on the Ebay market....

Pedi wrote:Well, I do not know Holmis - but I do not think that too many Norwegians see that much $$ in reproducing cheap logos for sale on the Ebay market....

That's the thing pedi. To have stickers and what not done is fairly cheap as long as you have the art work. If you pay to have artwork done it will quite easily run into the hundreds of dollars.

Where you are from has nothing to do with it. If nearly any of you that I know asked me, I'd give you whatever I have. If I don't know you, you are new to the board w/ little or no contribution to our community and ask us for artwork for 2 different model lines of amp, and beyond that some of which are LE, well, I want to know what's up. I'm not trying to be rude or to accuse anyone of anything, so please don't take offense. I can probably help this guy with some of this, but I would like to know what cause I am donating to.

Thanks,
Jason

I can dig it....I understand hard work...

Pedi wrote:......aaaaand I am curious what you are up to with all theese logos...
Are you planning to do an oldschool setup with MS/amps? If so, you are not alone in Norway, hehe...

Yes I am.... but plans are not yet set.

Jacampb2 wrote: And I too am curious. I have at least the Team member and the frank plexi logo already in vector format. Not to be rude, but it took hours of work, and I am leery about handing them out to a new member just to see cut vinyl or reproduction screens showing up on ebay...

Most of my vector stuff I have done has been drawn to work well w/ my CNC machine. It will not work for screens and vinyl w/o some tweaking but it is a good base to start from. I have literally dozens of PG things and a few other manufacturers in some vector form or another. I have weeks of time invested in these though, so I don't want to just post them up for anyone on the interweb to get a hold of...

Anyhow, tell us what you are up too, and we might be able to help.

Later,
Jason

understad that your sceptisism.. I would be to, belive me...
I do a lot of vector work myself, and I know how many hours that goes into it. Since the old PG graphics has been around for a couple of decades I hoped I someone got hold on some of them in a decent vector format.
I am currenty planning a theme for my car. Its an Old Jeep and it has to have an Old school PG theme. I haven`t decided yet for what I want and the graphics is what I now is playing around with. Thats why I want hold on the vector images....

Here is a pic of the car:

Jacampb2 wrote:

Pedi wrote:Well, I do not know Holmis - but I do not think that too many Norwegians see that much $$ in reproducing cheap logos for sale on the Ebay market....

That's the thing pedi. To have stickers and what not done is fairly cheap as long as you have the art work. If you pay to have artwork done it will quite easily run into the hundreds of dollars.

Where you are from has nothing to do with it. If nearly any of you that I know asked me, I'd give you whatever I have. If I don't know you, you are new to the board w/ little or no contribution to our community and ask us for artwork for 2 different model lines of amp, and beyond that some of which are LE, well, I want to know what's up. I'm not trying to be rude or to accuse anyone of anything, so please don't take offense. I can probably help this guy with some of this, but I would like to know what cause I am donating to.

Thanks,
Jason

In the end it will be used for shablongs for my paint.
But I do understand, and since I just descovered this forum recently its just fair with an answer... But for the record: I have NO interest in this commersally, and there is really no market either ....


Thanks !

//Asle

Nice looking 7. You don't find them in that kind of shape here that often. I'd donate a kidney for it

Anyhow, I'll PM you in a min. I can't find my route 66 that I did, but I have the first two on your list.

Later,
Jason

Just made the Reactor logo in vector.... could be a cool theme..

gonna make the warning radioactive logo & warning logo from case too..

I just converted the modern surfboard logo today, I took a pic of my big metal cutout on a piece of black carpet and converted it over. How do we post those files here? If anyone wants it let me know and I can email it. Since it started off as such a pig piece it came out fairly well imo.

I am going to be making bass cube and lpl remotes that are customized with all the different logos. If anyone is interested let me know, got alot done on it today but would need to order vinyl I can print on better.

PG logo Cleaned up a bit...

The Bandit/Outlaw "head" vector as requested tonym ......

I cut a few stickers with that logo I cleaned up...looks good...

tonym wrote:I cut a few stickers with that logo I cleaned up...looks good...

Pics?

tonym wrote:I cut a few stickers with that logo I cleaned up...looks good...

Why did you need to clean that up ?

if anyone wants any decals of the logos for your installs let me know. I was able to convert them all over to vectory fairly well and can make them what ever size you want and out of what every color vinyl you want. They can also be used as masks to etch plexi/glass or for painting.