Page 1 of 1
m100 with no gold (eco friendly board)
Posted: Sun Aug 01, 2010 3:22 pm
by tonym
This weekend is the first time my m100 has ever had the hood opened...
I was SHOCKED when I looked in....serial M1000673
AN ALL GREEN BOARD....NO GOLD AT ALL...
Posted: Sun Aug 01, 2010 4:31 pm
by jbob0124
Maybe its a "thumper" with a m100 case
Posted: Sun Aug 01, 2010 4:38 pm
by tonym
if that were the case...hehe...thumper would be the shit...
Posted: Sun Aug 01, 2010 5:16 pm
by jbob0124
Your secret is safe with me
Posted: Sun Aug 01, 2010 5:37 pm
by fuzzysnuggleduck
My M100 looks the same. My M44 has gold traces on the top though.
Posted: Sun Aug 01, 2010 5:54 pm
by tonym
fuzzysnuggleduck wrote:My M100 looks the same. My M44 has gold traces on the top though.
do you know the serial of it?
Posted: Mon Aug 02, 2010 8:10 am
by valeks1
First 200 or 300 M100 was build on green board made in USA.
Posted: Mon Aug 02, 2010 1:03 pm
by tonym
valeks1 wrote:First 200 or 300 M100 was build on green board made in USA.
my serial is in the 600's
Posted: Mon Aug 02, 2010 2:27 pm
by dBincognito
tonym wrote:valeks1 wrote:First 200 or 300 M100 was build on green board made in USA.
my serial is in the 600's
Mine is 866, I have gold for sure......it's one of those boards that looks reeeaaallly gold.
Posted: Mon Aug 02, 2010 2:59 pm
by dBincognito
Here is a good look at mine, #866. Have a good long look at the stock caps and the fluid everywhere. These caps are long overdue for a change, if you are running stock caps this is the kind of stuff that is going to happen. This is the way I received it.....I'll let you see it again after Eric and Matt have a threesome with it.
Posted: Mon Aug 02, 2010 3:01 pm
by holmis
Damn , nasty caps there...
Posted: Mon Aug 02, 2010 3:04 pm
by tonym
yeah...all my caps looked great....board was nice and clean also...
Posted: Mon Aug 02, 2010 3:07 pm
by dBincognito
tonym wrote:yeah...all my caps looked great....board was nice and clean also...
I spot some different parts, or revised...whatever you wanna call it.
Look in front of the torroid, I have Yageo 5w.....you have some other style, might be the same specs...maybe not.
Posted: Mon Aug 02, 2010 4:41 pm
by oldskoolmseriesfan
I would not settle for anything less than GOLD traces on the board
After all its Phoenix Gold not Phoenix Green
Posted: Mon Aug 02, 2010 5:13 pm
by valeks1
tonym wrote:valeks1 wrote:First 200 or 300 M100 was build on green board made in USA.
my serial is in the 600's
Your amplifier needs update. Replaced R42, R42A, R43, R43A with 160 Oms 3-5 watts resistors or 15volts supply will fail very soon.
Posted: Mon Aug 02, 2010 5:14 pm
by tonym
oldskoolmseriesfan wrote:I would not settle for anything less than GOLD traces on the board
After all its Phoenix Gold not Phoenix Green
I know...
I feel JUPED.....ooh well
Posted: Tue Aug 03, 2010 6:01 pm
by tonym
valeks1 wrote:tonym wrote:valeks1 wrote:First 200 or 300 M100 was build on green board made in USA.
my serial is in the 600's
Your amplifier needs update. Replaced R42, R42A, R43, R43A with 160 Oms 3-5 watts resistors or 15volts supply will fail very soon.
I have drivin this amp like a race car in the red...
Only problem was the gold part came off the rca.....
Posted: Tue Aug 03, 2010 6:54 pm
by ttocs
tonym wrote:oldskoolmseriesfan wrote:I would not settle for anything less than GOLD traces on the board
After all its Phoenix Gold not Phoenix Green
I know...
I feel JUPED.....ooh well
you know you would feel better if you didn't have to sit around looking at it. Ship it to me and I will give ya $20 to get it off your mind and do you a favor!
Posted: Tue Aug 03, 2010 7:32 pm
by tonym
ttocs wrote:tonym wrote:oldskoolmseriesfan wrote:I would not settle for anything less than GOLD traces on the board
After all its Phoenix Gold not Phoenix Green
I know...
I feel JUPED.....ooh well
you know you would feel better if you didn't have to sit around looking at it. Ship it to me and I will give ya $20 to get it off your mind and do you a favor!
I dont look at it much....its in my spare tire wheel well....
I just crank er up ......MS-8 install still to come... cant wait for that...